ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Numerical Investigation on Particle Deposition Characteristic Inside Turbine Cascade
Received date: 2013-01-16
Revised date: 2013-04-15
Online published: 2013-04-24
Supported by
National Natural Science Foundation of China (51276090);Funding of Jiangsu Innovation Program for Graduate Education (CXLX13_166);Fundamental Research Funds for the Central Universities
In order to reveal the particle deposition distribution inside the cascade, reduce the particle deposition, a numerical investigation is performed on the movement and deposition of dilute particles inside a two-dimensional turbine cascade, focusing on the effects of particle diameter and flow incidence angle on movement and particle deposition characteristics. Based on the EI-Batsh deposition model including particle sticking/rebounding and particle detachment, the investigation links user definition functions with Fluent to predict particle deposition. A comparison of the numerical results with existing experimental data shows that the present numerical model is valid. The research results show that particles with larger particle diameters do not follow air flow easily, thus exhibiting a higher collision rate and lower sticking rate. Particles with smaller particle diameters have the opposite tendency. Particle deposition mainly occurs on the central area of the blade pressure surface. The flow incidence angle has important influence on particle deposition distribution.
Key words： deposition; two phase flow; cascade; particle diameter; numerical analysis
ZHOU Junhui , ZHANG Jingzhou . Numerical Investigation on Particle Deposition Characteristic Inside Turbine Cascade[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013 , 34(11) : 2492 -2499 . DOI: 10.7527/S1000-6893.2013.0216
[1] Brun K,Nored M,Kurz R.Particle transport analysis of sand ingestion in gas turbine engines.Journal of Engineering for Gas Turbines and Power,2012,134(1): 012402-1-8.
[2] Dunn M G,Padova C,Moller J C,et al.Performance deterioration of a turbofan and a turbojet engine upon exposure to a dust environment.Journal of Engineering for Gas Turbines and Power,1987,109(3): 336-343.
[3] Kim J,Dunn M G,Baran A J,et al.Deposition of volcanic materials in the hot sections of two gas turbine engines.Journal of Engineering for Gas Turbines and Power,1993,115(3): 641-651.
[4] Schneider O,Dohmen H J,Benra F K,et al.Investigations of dust separation in the internal cooling air system of gas turbines.ASME Paper,GT-2003-38293,2003.
[5] Hamed A,Tabakoff W,Wenglarz R.Erosion and deposition in turbomachinery.Journal of Propulsion and Power,2006,22(2): 350-360.
[6] Hamed A A,Tabakoff W,Rivir R B,et al.Turbine blade surface deterioration by erosion.ASME Journal of Turbomachinery,2005,127(3): 445-452.
[7] Zhang Y L,McLaury B S,Shirazi S A.Improvements of particle near-wall velocity and erosion predictions using a commercial CFD code.ASME Journal of Fluids Engineering,2009,131(3): 031303-1-9.
[8] Yi J H,Shi F,Xu Z.A study on motion behaviours of particles through turbine cascade.Journal of Aerospace Power,1995,10(3): 277-279,313.(in Chinese) 伊景海,史峰,徐忠.平面叶栅内固体粒子运动特性的研究.航空动力学报,1995,10(3): 277-279,313.
[9] Rao J,Ge M C,Xu J Z,et al.Experimental investigation on interaction between solid particle and wall surface.Journal of Engineering Thermophysics,2003,24(1): 134-136.(in Chinese) 饶江,葛满初,徐建中,等.固体颗粒与通道壁面相互作用的实验研究.工程热物理学报,2003,24(1): 134-136.
[10] Xi G,Jia H X,Wang X F,et al.Numerical study of the deposition of solid particles in the blade cascade of axial compressors.Journal of Engineering Thermophysics,2003,24(1): 55-58.(in Chinese) 席光,贾会霞,王晓锋,等.轴流压缩机叶栅内固体微粒沉积的数值研究.工程热物理学报,2003,24(1): 55-58.
[11] Brach R,Dunn P F.A mathematical model of the impact and adhesion of microspheres.Aerosol Science and Technology,1992,16(1): 51-64.
[12] El-Batsh H,Haselbacher H.Numerical investigation of the effect of ash particle deposition on the flow field through turbine cascades.ASME Paper,GT-2002-30600,2002.
[13] Wammack J E,Crosby J,Fletcher D,et al.Evolution of surface deposits on a high pressure turbine blade,part I: physical characteristics.ASME Journal of Turbomachinery,2008,130(2): 021020-1-8.
[14] Guha A.Transport and deposition of particles in turbulent and laminar flow.Annual Review Fluid Mechanics,2008,40: 311-341.
[15] Ai W G,Fletcher T H.Computational analysis of conjugate heat transfer and particulate deposition on a high pressure turbine vane.ASME Journal of Turbomachery,2012,134(4): 041020-1-12.
[16] Arts T,de Rouvroit M L,Rutherford A W.Aero-thermal investigation of a highly loaded transonic linear turbine guide vane cascade.VKI Technical Note 174,1990.
/
| 〈 |
|
〉 |
CJA