航空航天装备的轻量化：挑战与未来

doi:10.7527/S1000-6893.2023.29965

Abstract

Abstract:

Lightweight is a substantial theme in the research and development of aerospace and aeronautical equipment due to its decisive impact on the comprehensive performance and operational efficiency of the equipment. Over the past decades， a handful of innovative optimization design approaches， emerging high-performance materials， and revolutionary manufacturing technologies have been uninterruptedly developed， and the level of lightweighting in aerospace and aeronautical equipment has been significantly advanced. However， the increasing demands for comprehensive performance and multifunctionality of the next generation of equipment present serious challenges to existing lightweight design and manufacturing technologies. Therefore， with a particular emphasis on the layout design， electromechanical system design， materials and structures， high-performance manufacturing and assembly， this paper analyzes the posed challenges and future perspectives.

Key words: aerospace and aeronautical equipment, lightweight design and manufacturing, equipment layout technology, material and structure technology, high-performance manufacturing and assembly

CLC Number:

Weihong ZHANG, Changhong TANG. Lightweighting of aerospace and aeronautical equipment: Challenges and perspectives[J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(5): 529965-529965.

Figures/Tables 4

References 25

1	中华人民共和国国务院新闻办公室. 2021中国的航天［R/OL］. （2022-01-28）［2023-09-11］. .
	The State Council Information Office of the People’s Republic of China. White paper： China’s space program： a 2021 perspective ［R/OL］. （2022-01-28）［2023-09-11］. （in Chinese）.
2	中国航空工业集团有限公司. 通用航空产业发展白皮书（2022）［R/OL］. （2022-11-09）［2023-09-11］. .
	Aviation Industry Corporation of China， Ltd. White paper： General aviation industry development ［R/OL］. （2022-11-09）［2023-09-11］. （in Chinese）.
3	National Aeronautics and Space Administration. NASA selects proposals for ultra-lightweight materials for journey to Mars and beyond ［EB/OL］. （2015-04-09）［2023-09-11］. .
4	Royal Netherlands Aerospace Centre. White paper： Aircraft structural design in the future ［R/OL］. （2021-03-01）［2023-09-11］. .
5	MERLIN P W. Green light for green flight： NASA’s contributions to environmentally responsible aviation ［R］. Washington： National Aeronautics and Space Administration， 2020.
6	National Aeronautics and Space Administration. NASA issues award for greener， more fuel-efficient airliner of future ［EB/OL］. （2023-1-19）［2023-9-16］. .
7	National Aeronautics and Space Administration. NASA’s new material built to withstand extreme conditions ［EB/OL］. （2022-06-03）［2023-9-16］. .
8	LOBNER P. DARPA/ Lockheed Martin-ISIS stratospheric airship ［R/OL］. （2023-6-16）［2023-9-16］. .
9	KARNOZOV V. Russia targets low cost， high performance with Su-75 Checkmate fighter ［EB/OL］. （2021-07-21）［2023-9-16］. .
10	MARSH G. Airbus takes on Boeing with reinforced plastic A350 XWB［J］. Reinforced Plastics， 2007， 51（11）： 26-29.
11	SANJAY M R， PARAMESWARANPILLAI J， SIENG⁃ CHIN S， et al. Lightweight polymer composite structures： design and manufacturing techniques［M］. 2020.
12	ZHU J H， ZHANG W H， XIA L. Topology optimization in aircraft and aerospace structures design［J］. Archives of Computational Methods in Engineering， 2016， 23（4）： 595-622.
13	全栋梁，时光辉，关成启，等. 结构优化技术在高速飞行器上的应用与面临的挑战［J］. 力学与实践， 2019， 41（4）： 373-381.
	QUAN D L， SHI G H， GUAN C Q， et al. Applications and challenges of structural optimization in high-speed aerocraft［J］. Mechanics in Engineering， 2019， 41（4）： 373-381 （in Chinese）.
14	张卫红，周涵，李韶英. 航天高性能薄壁构件的材料-结构一体化设计［J］. 航空学报， 2023， 44（9）： 627428.
	ZHANG W H， ZHOU H， LI S Y， et al. Material-structure integrated design for high-performance aerospace thin-walled component ［J］. Acta Aeronautica et Astronautica Sinica， 2023， 44（9）： 627428 （in Chinese）.
15	ZHU J， ZHANG W， BECKERS P. Integrated layout design of multi‐component system［J］. International Journal for Numerical Methods in Engineering， 2009， 78（6）： 631-651.
16	LI L， ZHANG K， CHENG H， et al. Experimental and simulation investigations on the morphology of aerosol jet printed polymer traces under in-situ UV and thermal curing conditions［J］. Additive Manufacturing， 2023， 69： 103515.
17	MENG L， ZHANG W H， QUAN D， et al. From topology optimization design to additive manufacturing： Today’s success and tomorrow’s roadmap ［J］. Archives of Computational Methods in Engineering， 2020， 27（3）： 805-830.
18	MENG L， SHI J， YANG C， et al. An emerging class of hyperbolic lattice exhibiting tunable elastic properties and impact absorption through chiral twisting ［J］. Extreme Mechanics Letters， 2020， 40： 100869.
19	XU Y， ZHU J， WU Z， et al. A review on the design of laminated composite structures： constant and variable stiffness design and topology optimization ［J］. Advanced Composites and Hybrid Materials， 2018， 1（3）： 460-477.
20	MENG L， QIU X， GAO T， et al. An inverse approach to the accurate modelling of 3D-printed sandwich panels with lattice core using beams of variable cross-section ［J］. Composite Structures， 2020， 247： 112363.
21	CORDIS （Community Research and Development Information Service）. Zero-defect manufacturing of composite parts in the aerospace industry［EB/OL］. （2019-9-30）［2023-9-16］. .
22	侯杰，朱继宏，王创，等. 考虑机械连接载荷和疲劳性能的装配结构拓扑优化设计方法［J］. 科学通报， 2019， 64（1）： 79-86.
	HOU J， ZHU J H， WANG C， et al. Topology optimization of the multi-fasteners jointed structure considering joint load constraint and fatigue constraints ［J］. Chinese Science Bulletin， 2019， 64（1）： 79-86 （in Chinese）.
23	YANG Y， YUAN J W， LIU H C， et al. Generalized model for dynamics and stability of milling of titanium alloys by integrating process damping， multiple modes and multiple delays ［J］. Journal of Manufacturing Processes， 2023， 102： 718-735.
24	ZHANG K， LI H， CHENG H， et al. Combined effects of seawater ageing and fatigue loading on the bearing performance and failure mechanism of CFRP/CFRP single-lap bolted joints ［J］. Composite Structures， 2020， 234： 111677.
25	悦增建. 案例展示［EB/OL］. （2021-07-21）［2023-9-16］. .
	YUE Z J. Case showcase ［EB/OL］. （2021-07-21）［2023-9-16］. （in Chinese）.

[1]	Zhefeng YU, Shichang LIANG, Weibo SHI, Deyang TIAN, Anhua SHI, Dongjun LIAO, Ying YANG. Analysis and evaluation technology for optical radiation and radar scattering characteristics of HTV⁃2⁃like vehicle [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729465-729465.
[2]	. Knowledge atlas analysis of AI-Driven multidisciplinary development of hypersonic aircrafts [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[3]	. Key Technologies and Challenges of High-Performance Servo Motor Pump [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[4]	. Research status and prospects of infrared multi-band imaging terminal guidance technology [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[5]	Yibin YE, Xichao TENG, Qifeng YU, Zhang LI. Optical⁃SAR image matching based on MatchNet and multi⁃point matching constraint [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(10): 329162-329162.
[6]	. A New Type of Numerical Calculation Method for the Thermodynamic Two-Temperature Model [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[7]	Qichang ZHAO, Yiquan WU, Yubin YUAN. Progress of ship detection and recognition methods in optical remote sensing images [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(8): 29025-029025.
[8]	. Standard Modeling and solving methods for large-scale constellation collaborative scheduling for early warning scenarios [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[9]	. Study of Solid Rocket Motor Pressure Oscillations under Lateral Composite Overloads [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[10]	. Research status and Development Trend of Morphing Wingtip Technology [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[11]	. [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[12]	Li CHEN, Xiaoyun ZENG, Wen HUANG, Jianfei ZHANG. Lattice structure optimization design under harmonic base acceleration excitations [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(5): 529704-529704.
[13]	. Research on the Evaluation Method of Laser Electromagnetic Ultrasonic Resonance for Metal Sheet Thickness [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[14]	. Review on rotary ultrasonic machining of carbon fiber composites [J]. Acta Aeronautica et Astronautica Sinica, 0, (): 0-0.
[15]	Yupeng WEI, Shan CHEN, Yating WANG, Dongxin WANG, Yanhong YU, Meng ZHANG, Rongzhen XIAO, Liang ZHU, Yuewei CHENG. Research progress on refractory metal and metallic carbide/oxide powder preparation techniques [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(3): 28719-028719.

Lightweighting of aerospace and aeronautical equipment: Challenges and perspectives

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 4

References 25

Related Articles 15

Recommended Articles

Metrics

Comments