面向航空智能制造的DT与AI融合应用

doi:10.7527/S1000-6893.2020.24173

Abstract

Abstract: Aiming at the problems of multi-dimensional and multi-scale manufacturing process management and control, high complexity of manufacturing resources composition, and difficulty in tracking and locating quality problems in complex manufacturing scenarios of aviation equipment, combined with the technical characteristics of Digital Twin (DT) and Artificial Intelligence (AI), the research on the fusion application of DT and AI for aviation intelligent manufacturing is carried out. Based on the application status of digital twin and artificial intelligence, this paper systematically expounded the fusion mechanism of digital twin and artificial intelligence, analyzed the key technologies that support the fusion of digital twin and artificial intelligence to drive the aviation intelligent manufacturing and the key issues involved in the construction of AI control center driven by the fusion of digital twin and artificial intelligence. On this basis, the application scenarios such as adaptive control of manufacturing process, intelligent control of production process in intelligent workshop, resource scheduling and optimization decision-making in manufacturing process, and product intelligent quality control are discussed, which could provide reference for the fusion of digital twin and artificial intelligence in aviation intelligent manufacturing.

Key words: aviation equipment, intelligent manufacturing, DT, AI, fusion application

CLC Number:

SUI Shaochun, XU Aiming, LI Xiaohua, LIU Shuntao, HUANG Wei. Fusion application of DT and AI for aviation intelligent manufacturing[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 624173-624173.

References 24

[1]	沈洪才. 航空工业数字工程转型与智能制造[J]. 国防科技工业, 2018, 220(10):36. SHEN H C. Digital engineering transformation and intelligent manufacturing in AVIC[J]. Defence Science & Technology Industry, 2018, 220(10):36(in Chinese).
[2]	余志强, 陈嵩, 孙炜, 等. 基于MBD的三维数模在飞机制造过程中的应用[J]. 航空制造技术, 2009(25):82-85. YU Z Q, CHEN S, SUN W, et al. Application of MBD-based three-dimensional module in aircraft manufacturing[J]. Aeronautical Manufacturing Technology, 2009(25):82-85(in Chinese).
[3]	隋少春, 牟文平, 龚清洪, 等. 数字化车间及航空智能制造实践[J]. 航空制造技术, 2017(7):46-50. SUI S C, MU W P, GONG Q H, et al. Digital workshop and intelligent manufacturing practices[J]. Aeronautical Manufacturing Technology, 2017(7):46-50(in Chinese).
[4]	陶飞, 张萌, 程江峰, 等. 数字孪生车间——一种未来车间运行新模式[J]. 计算机集成制造系统, 2017, 23(1):1-9. TAO F, ZHANG M, CHENG J F, et al. Digital twin workshop:A new paradigm for future workshop[J]. Computer Integrated Manufacturing Systems, 2017, 23(1):1-9(in Chinese).
[5]	张曙. 工业4.0和智能制造[J]. 机械设计与制造工程, 2014(8):1-5. ZHANG S. The industry 4.0 and intelligent manufacturing[J]. Machine Design and Manufacturing Engineering, 2014(8):1-5(in Chinese).
[6]	杨林瑶, 陈思远, 王晓, 等. 数字孪生与平行系统:发展现状、对比及展望[J]. 自动化学报, 2019, 45(11):2001-2031. YANG L Y, CHEN S Y, WANG X, et al. Digital twins and parallel systems:State of the art, comparisons and prospect[J]. Acta Automatica Sinica, 2019, 45(11):2001-2031(in Chinese).
[7]	孙其博, 刘杰, 黎羴, 等. 物联网:概念、架构与关键技术研究综述[J]. 北京邮电大学学报, 2010, 33(3):1-9. SUN Q B, LIU J, LI S, et al. Internet of things:Summarize on concepts, architecture and key technology problem[J]. Journal of Beijing University of Posts and Telecommunications, 2010, 33(3):1-9(in Chinese).
[8]	李国杰, 程学旗. 大数据研究:未来科技及经济社会发展的重大战略领域——大数据的研究现状与科学思考[J]. 中国科学院院刊, 2012, 27(6):647-657. LI G J, CHENG X Q. Research status and scientific thinking of big data[J]. Bulletin of the Chinese Academy of Sciences, 2012, 27(6):647-657(in Chinese).
[9]	LIGEZA A. Artificial intelligence:A modern approach[J]. Neurocomputing, 1995, 9(2):215-218.
[10]	余晓晖, 刘默, 蒋昕昊, 等. 工业互联网体系架构2.0[J]. 计算机集成制造系统, 2019, 25(12):2983-2996. YU X H, LIU M, JIANG X H, et al. Industrial internet architecture 2.0[J]. Computer Integrated Manufacturing Systems, 2019, 25(12):2983-2996(in Chinese).
[11]	ADAM J A. Virtual reality is for real[J]. IEEE Spectrum, 1993, 30(10):22-29.
[12]	RYDLINGER A. Augmented reality[J]. The Journal of Ocean Technology, 2015, 10(2):92-93.
[13]	陶剑, 戴永长, 魏冉. 基于数字线索和数字孪生的生产生命周期研究[J]. 航空制造技术, 2017, 60(21):26-31. TAO J, DAI Y C, WEI R. Study on production lifecycle based on digital thread and digital twin[J]. Aeronautical Manufacturing Technology, 2017, 60(21):26-31(in Chinese).
[14]	SHAFTO M, CONROY M, DOYLE R, et al. Modeling, simulation, information technology & processing roadmap[C]//National Aeronautics and Space Administration, 2010:5-7.
[15]	孟松鹤, 叶雨玫, 杨强, 等. 数字孪生及其在航空航天中的应用[J/OL].[2020-04-28],航空学报,http://kns.cnki.net/kcms/detail/11.1929.V.20200316.0946.006.html. MENG S H, YE Y M, YANG Q, et al. Digital twin and its aerospace applications[J/OL].[2020-04-28]. Acta Aeronautica et Astronautica Sinica, http://kns.cnki.net/kcms/detail/11.1929.V.20200316.0946.006.html (in Chinese).
[16]	李浩, 陶飞, 王昊琪, 等. 基于数字孪生的复杂产品设计制造一体化开发框架与关键技术[J]. 计算机集成制造系统, 2019, 25(6):1320-1336. LI H, TAO F, WANG H Q, et al. Integration framework and key technologies of complex product design-manufacturing based on digital twin[J]. Computer Integrated Manufacturing Systems, 2019, 25(6):1320-1336(in Chinese).
[17]	刘丹, 黄海涛, 王保兴, 等. 基于数字孪生的再制造车间作业模式[J]. 计算机集成制造系统, 2019, 25(6):1515-1527. LIU D, HUANG H T, WANG B X, et al. Operation paradigm for remanufacturing shop-floor based on digital twin[J]. Computer Integrated Manufacturing Systems, 2019, 25(6):1515-1527(in Chinese).
[18]	赵阳, 伏晓露, 廖庆妙, 等. 基于数字孪生的智能脉动管控[J]. 航空制造技术, 2020, 63(Z1):14-20. ZHAO Y, FU X L, LIAO Q M, et al. Intelligent production management and control for aircraft assembly pulsation line based on digital twin[J]. Aeronautical Manufacturing Technology, 2020, 63(Z1):14-20(in Chinese).
[19]	刘蔚然, 陶飞, 程江峰, 等. 数字孪生卫星:概念、关键技术及应用[J]. 计算机集成制造系统, 2020, 26(3):565-588. LIU W R, TAO F, CHENG J F, et al. Digital twin satellite:Concept, key technologies and applications[J]. Computer Integrated Manufacturing Systems, 2020, 26(3):565-588(in Chinese).
[20]	向峰, 黄圆圆, 张智, 等.基于数字孪生的产品生命周期绿色制造新模式[J].计算机集成制造系统, 2019, 25(6):1505-1514. XIANG F, HUANG Y Y, ZHANG Z, et al. New paradigm of green manufacturing for product life cycle based on digital twin[J]. Computer Integrated Manufacturing Systems, 2019, 25(6):1505-1514(in Chinese).
[21]	丁凯, 张旭东, 周光辉, 等. 基于数字孪生的多维多尺度智能制造空间及其建模方法[J]. 计算机集成制造系统, 2019, 25(6):1491-1504. DING K, ZHANG X D, ZHOU G H, et al. Digital twin-based multi-dimensional and multi-scale modeling of smart manufacturing spaces[J]. Computer Integrated Manufacturing Systems, 2019, 25(6):1491-1504(in Chinese).
[22]	刘建伟, 刘媛, 罗雄麟. 深度学习研究进展[J]. 计算机应用研究, 2014, 31(7):1921-1930, 1942. LIU J W, LIU Y, LUO X L. Research and development on deep learning[J]. Application Research of Computers, 2014, 31(7):1921-1930, 1942(in Chinese).
[23]	KHOTANZAD A, HONG Y H. Invariant image recognition by Zernike moments[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1990, 12(5):489-497.
[24]	陶飞, 刘蔚然, 刘检华, 等. 数字孪生及其应用探索[J]. 计算机集成制造系统, 2018, 24(1):1-18. TAO F, LIU W R, LIU J H, et al. Digital twin and its potential application exploration[J]. Computer Integrated Manufacturing Systems, 2018, 24(1):1-18(in Chinese).

Fusion application of DT and AI for aviation intelligent manufacturing

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 24

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Dawei HAN, Shijie ZHENG, Youli TUO, Mingyu GE, Liming SONG, Xinqiao LI, Xiangyang WEN, Shaolin XIONG. Orbit determination analysis using Crab observation data of GECAM mission [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(3): 526641-526641.
[2]	Yahui SONG, Gaoyu FAN, Lixia QU, Yuelin ZHANG, Yue XU, Shuo HAN. Progress of aircraft sonic boom flight test measurement technology: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 626186-626186.
[3]	Gongye YU, Weidong CAI, Minghui HU, Wencai LIU, Bo MA. Intelligent migration diagnosis of mechanical faults driven by hybrid fault mechanism and domain adaptation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 426800-426800.
[4]	Yong CHEN, Kelin ZHONG, Yue LUO, Miao WANG. Key technology and future development of regional airliner [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 26697-026697.
[5]	Zeyong YIN, Yancheng YOU, Chengxiang ZHU, Jianfeng ZHU, Liaoni WU, Yue HUANG. Multi-ducted twin-turbines ejector-ramjet/scramjet combined cycle engine for hypersonic civil vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 627181-627181.
[6]	Di WANG, Yan LENG, Long YANG, Zhonghua HAN, Zhansen QIAN. Atmospheric turbulence effects on sonic boom propagation based on augmented Burgers equation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 626318-626318.
[7]	Yulin DING, Zhonghua HAN, Jianling QIAO, Han NIE, Wenping SONG, Bifeng SONG. Research progress in key technologies for conceptual-aerodynamic configuration design of supersonic transport aircraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 626310-626310.
[8]	Yiran GU, Jiangtao HUANG, Shusheng CHEN, Deyuan LIU, Zhenghong GAO. Sonic boom inversion technology based on inverse augmented Burgers equation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 626258-626258）.
[9]	Jianling QIAO, Zhonghua HAN, Yulin DING, Wenping SONG, Bifeng SONG. Effects of stratified atmospheric turbulence on farfield sonic boom propagation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 626350-626350.
[10]	Zhiqiang WEI, Zheming WENG, Yongzhao HUA, Xiwang DONG, Zhang REN. Formation-containment tracking control for heterogeneous unmanned swarm systems with switching topologies [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 326504-326504.
[11]	Cheng’an ZHANG, Baoguo LI, Xiang WANG, Qiang XU. Radar-embedded communication waveform design with low complexity [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 326471-326471.
[12]	Binbin ZHAO, Heng ZHANG, Jie LI. Review of numerical simulation on complex separated flow of iced airfoil [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627211-627211.
[13]	Junjie NIU, Weimin SANG, Dong LI, Lian HAO, Zelin WANG. Icing test flight area determination method based on surrogated model of water droplet collection [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627697-627697.
[14]	Heng ZHANG, Jie LI, Binbin ZHAO. Improvement mechanism of ice-tolerance capacity for iced airfoil with variable camber of drooping leading edge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627114-627114.
[15]	Jun SHU, Dongguang XU, Zhirong HAN, Si LI, Xiong HUANG. Hybrid wing design of icing wind tunnel supercooled large droplet icing test [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627182-627182.