基于齿廓修形的锥齿轮再制造技术

doi:10.7527/S1000-6893.2018.21856

Abstract

Abstract: The bevel gear is an important part in an aero-engine transmission system, and wearing, pitting, spalling and scuffing are easy to appear on the tooth surface of the gear in running. In this paper, failure causes of the bevel gear and feasibility of remanufacturing are analyzed, profile modification technology is introduced, the fault discriminate standard of bevel gear is set up, remanufacturing technological method of bevel gear is draw up, carburization depth and micro-hardness test, gear assembly check, engine test run. The results show that carburization depth, micro-hardness, meshing clearance, color marking check and tooth contact patterns accord with technical requirements. The gear drives smoothly and steadily, with good meshing performance, and reduced vibration and noise. Remanufacturing of the bevel gear costs only 11.3% of the new gear and saves 86% energy and 78% material, obtaining remarkable economic and social benefits and having a wide application foreground.

Key words: bevel gear, profile modification, aero-engine, remanufacturing, vibration signal

CLC Number:

CHEN Lishun, LI Silu, CHENG Li, YANG Wukui. Bevel gear remanufacturing technology based on profile modification[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(6): 421856-421856.

References

[1] 郭梅,陈聪慧,胡兴海,等. 航空发动机附件机匣结构设计方法研究[J]. 机械传动, 2017, 41(3):211-216. GUO M, CHEN C H, HU X H, et al. Research of the aero engine accessory gearbox structure design method[J]. Journal of Mechanical Transmission, 2017, 41(3):211-216(in Chinese).
[2] 徐萍. 齿轮的磨损失效及修复[J]. 甘肃冶金, 2010, 32(1):112-113. XU P. Gear wear failure and repair[J]. Gansu Metallurgy, 2010, 32(1):112-113(in Chinese).
[3] 赵韩,吴其林,黄康. 国内齿轮研究现状及问题研究[J]. 机械工程学报, 2013, 49(19):11-20. ZHAO H,WU Q L, HUANG K. Status and problem research on gear study[J]. Journal of Mechanical Engineering, 2013, 49(19):11-20(in Chinese).
[4] DANIEL V,GUIDE R. Production planning and control for remanufacturing industry:Practice and research needs[J]. Journal of Operations Management, 2000,18(4):467-483.
[5] 朱坤鹏. 工程机械变速箱再制造的研究与应用[D]. 柳州:广西科技大学, 2015:8-11. ZHU K P. Engineering machinery gearbox to the research and application of remanufacturing[D]. Liuzhou:Guangxi University of Science and Technology, 2015:8-11(in Chinese).
[6] 徐滨士. 中国再制造工程及其进展[J]. 中国表面工程, 2010, 23(2):1-6. XU B S. Remanufacture engineering and its development in China[J]. China Surface Engineering, 2010, 23(2):1-6(in Chinese).
[7] 朱胜. 再制造技术创新发展的思考[J]. 中国表面工程, 2013, 26(5):1-5. ZHU S. Ponderation and analysis on remanufacture technology development[J]. China Surface Engineering, 2013, 26(5):1-5(in Chinese).
[8] 孙晓峰,史佩京,邱骥,等. 再制造技术体系及典型技术[J]. 中国表面工程, 2013, 26(5):117-124. SUN X F, SHI P J, QIU J, et al. Technical system and typical technologies of remanufacture[J]. China Surface Engineering, 2013, 26(5):117-124(in Chinese).
[9] 刘宝山, 杜群贵, 文奇. 考虑安装误差的斜齿轮啮合刚度计算与分析[J]. 机械传动, 2017, 41(3):33-37. LIU B S, DU Q G, WEN Q. Calculation analysis of meshing stiffness of helical gear considering installation error[J]. Journal of Mechanical Transmission, 2017, 41(3):33-37(in Chinese).
[10] 周志峰, 刘伟, 王婧. 渐开线直齿轮修形的有限元分析与研究[J]. 机电工程, 2013, 30(12):1490-1493. ZHOU Z F, LIU W, WANG J. Finite element analysis and research on involute spur gear modification[J]. Journal Mechanical & Electrical Engineering, 2013, 30(12):1490-1493(in Chinese).
[11] 曹雪梅,娄佳佳,马战勇. 锥齿轮修形齿面安装误差敏感性分析[J]. 机械传动, 2014(4):40-43. CAO X M,LOU J J, MA Z Y. Sensitivity analysis of installation errors of the straight bevel gear modification tooth surface[J]. Journal of Mechanical Transmission, 2014(4):40-43(in Chinese).
[12] 李召华,韩梅,郎娟芳. 齿轮失效形式分析[J]. 机电产品开发与创新, 2011, 24(2):97-98. LI Z H,HAN M, LANG J F. Failure method analysis of gear[J]. Development & Innovation of Machinery & Electrical Products, 2011, 24(2):97-98(in Chinese).
[13] SHERAFATNIA K,FARRAHI G H,MAHMOUDI A H,et al. Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior[J]. Materials Science & Engineering A, 2016, 657:309-321.
[14] 宋洪侠,孙伟志,孔志营. 齿轮齿面强化方法概述[J]. 现代制造工程, 2014, 2:135-139. SONG H X, SUN W Z, KONG Z Y. Overview of gear tooth flank strengthening methods[J]. Modern Manufacturing Engineering, 2014, 2:135-139(in Chinese).
[15] 袁哲,孙志礼,郭瑜. 直齿圆柱齿轮齿廓修形曲线优化设计[J]. 机械传动, 2010, 34(5):1-4. YUAN Z, SUN Z L, GUO Y. Optimal design of profile modification curves for spur gears[J]. Journal of Mechanical Transmission, 2010, 34(5):1-4(in Chinese).
[16] 袁亚洲,邵年,陆保春,等. 基于接触有限元分析的渐开线齿轮修形曲线的研究[J]. 机械传动, 2017, 41(4):34-37. YUAN Y Z, SHAO N, LU B C, et al. Research of involute gear modification curve based on finite element contact analysis[J]. Journal of Mechanical Transmission, 2017, 41(4):34-37(in Chinese).
[17] 陈思雨,唐进元,王志伟,等. 修形对齿轮系统动力学特性的影响规律[J]. 机械工程学报, 2014, 50(13):59-65. CHEN S Y,TANG J Y, WANG Z W, et al. Effect of modification on dynamic characteristics of gear transmissions system[J]. Journal of Mechanical Engineering, 2014, 50(13):59-65(in Chinese).
[18] 陈霞. 直齿锥齿轮修形方法研究[D]. 武汉:华中理工大学,2006:8-12. CHEN X. Research on the tooth modification methods of the straight bevel gear[D]. Wuhan:Huazhong University of Science and Technology, 2006:8-12(in Chinese).
[19] 张军锋,史耀耀,蔺小军,等. 航空发动机叶片前后缘自由式砂带抛光技术[J]. 航空学报, 2017, 38(3):420327. ZHANG J F, SHI Y Y,LIN X J,et al. Freestyle belt polishing technology for leading and trailing edges of aero-engine blade[J].Acta Aeronautica et Astronautica Sinica, 2017, 38(3):420327(in Chinese).
[20] 陈霞,汪娇,夏巨谌,等. 直齿圆锥齿轮修形仿真[J]. 机械科学与技术, 2009, 28(3):386-390. CHEN X, WANG J, XIA J C, et al. Simulation of the modification of a straight bevel gear tooth[J]. Mechanical Science and Technology for Aerospace Engineering,2009, 28(3):386-390(in Chinese).
[21] 崔培枝,杨俊娥,朱胜. 产品再制造过程中的清洗技术研究[J]. 中国表面工程, 2006, 19(5):123-125. CUI P Z, YANG J E, ZHU S. Cleaning technology study in product remanufacturing process[J]. China Surface Engineering, 2006, 19(5):123-125(in Chinese).

Bevel gear remanufacturing technology based on profile modification

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LIU Jiaqi, FENG Yunwen, LU Cheng, XUE Xiaofeng, PAN Weihuang. Safety analysis of aero-engine operation based on intelligent neural network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625375-625375.
[2]	ZHANG Shuo, LIU Zhiwen. Structured Bayesian sparse representation of aero-engine bearing failures [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625056-625056.
[3]	ZHANG Zhongqiang, ZHANG Xin, WANG Jiaxu, LIU Zhiwen. Reweighted kurtogram for aero-engine fault diagnosis [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625445-625445.
[4]	HAN Songyu, SHAO Haidong, JIANG Hongkai, ZHANG Xiaoyang. Intelligent fault diagnosis of aero-engine high-speed bearings using enhanced CNN [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625479-625479.
[5]	DU Jianjian, PAN Xiande, LIU Tianyi. Indirect measurement method for axial load of aero-engine angular contact ball bearing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625457-625457.
[6]	LI Dingjun, YANG Liuyu, SUN Fan, JIANG Peng, CHEN Yiwen, WANG Tiejun. Effect of preheating temperature on formation of surface cracks in thermal barrier coating system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526184-526184.
[7]	WANG Bo, GAO Peixin, MA Hui, SUN Wei, LIN Junzhe, LI Hui, HAN Qingkai, LIU Zhonghua. Dynamic characteristics of aero-engine pipeline system: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 25332-025332.
[8]	JIN Yulin, LIU Zhiwen, CHEN Yushu. Fault simulation of blade-casing rubbing for dual-rotor system of aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 425072-425072.
[9]	SUN Xiaofeng, DONG Xu, ZHANG Guangyu, WANG Zhuo, SUN Dakun. Progress review of application of eigenvalue theory to stability prediction [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527408-527408.
[10]	ZHAO Gang, LI Jinyue, XU Maocheng, ZHANG Pengfei. Research status and prospect of key aero-engine assembly technology [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527484-527484.
[11]	ZHANG Shuai, ZHANG Qiangbo, ZHANG Xiamei. Identification of foreign object impact on aero-engine fan blades with variance analysis [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524196-524196.
[12]	WANG Fang, WANG Yudong, JIANG Shengli, CHEN Jun, TANG Jun, XU Huasheng, LI Xiangyuan, XING Jingwen, GAO Dongshuo, JIN Jie. Development and testing of AECSC-JASMIN turbulent combustion simulation software [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 625003-625003.
[13]	ZHAO Huan, JIANG Zongmin, DING Han. Tool path planning for profiling grinding of aero-engine blade edge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524318-524318.
[14]	DING Siyi, ZHENG Xiaohu. Precision control of rotor assembly based on improved Jacobian-Torsor theory [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524670-524670.
[15]	WANG Xi, HU Changhua, REN Ziqiang, XIONG Wei. Performance degradation modeling and remaining useful life prediction for aero-engine based on nonlinear Wiener process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 223291-223291.