存在横流时双压电风扇激励传热特性

doi:10.7527/S1000-6893.2017.121424

Abstract

Abstract: A numerical investigation is performed to explore the 3D unsteady flow features and heat transfer performance induced by dual vertically-oriented piezoelectric fans in the presence of cross flow. The numerical simulations are conducted by using dynamic meshing scheme in combination with the periodic movement law of the displacement of the vibrating fan. The vortical and thermal features with dual piezoelectric fans are obtained for two dual fans arrangements (face-to-face and edge-to-edge) at in-phase and out-of-phase vibrating conditions. The results show that the vibrating phase of dual fans has an obvious influence on convective heat transfer performance. For the dual fans arranged in the face-to-face mode, the convective heat transfer downstream the fan-tip vibration envelope under the out-of-phase situation is higher than that under the in-phase situation. For the dual fans arranged in the edge-to-edge mode, the convective heat transfer in the region between two adjacent fans under the out-of-phase situation is significantly less than that under the in-phase situation.

Key words: piezoelectric fan, cross flow, dual fans, convective heat transfer, numerical simulation

CLC Number:

V231.11
O354

LI Xinjun, ZHANG Jingzhou, TAN Xiaoming. Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(1): 121424-121424.

References

[1] YOO J H, HONG J I, CAO W. Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices[J]. Sensors Actuators A, 2000, 79(1):8-12.[2] CHUNG H C, KUMMARI K L, CROUCHER S J, et al. Development of piezoelectric fans for flapping wing application[J]. Sensors and Actuators A:Physical, 2009, 149(1):136-142.[3] GILSON G M, PICKERING S J, HANN D B, et al. Piezoelectric fan cooling:A novel high reliability electric machine thermal management solution[J]. IEEE Transactions on Industrial Electronics, 2013, 60(11):4841-4851.[4] KIM Y H, WERELEY S T, CHUN C H. Phase-resolved flow field produced by a vibrating cantilever plate between two endplates[J]. Physics in Fluids, 2004, 16(1):145-162.[5] KIM Y H, CHUN C H, WERELEY S. Flow field around a vibrating cantilever:Coherent structure education by continuous wavelet transform and proper orthogonal decomposition[J]. Journal of Fluid Mechanics, 2011, 669:584-606.[6] KIMBER M, SUZUKI K, KITSUNAI N, et al. Pressure and flow rate performance of piezoelectric fans[J]. IEEE Transactions on Components and Packaging Technologies, 2009, 32(4):766-775.[7] 谭蕾, 谭晓茗, 张靖周. 压电风扇激励非定常流动和换热特性数值研究[J]. 航空学报, 2013, 34(6):1277-1284. TAN L, TAN X M, ZHANG J Z. Numerical investigation on unsteady flow and heat transfer characteristics of piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1277-1284(in chinese).[8] TAN L, ZHANG J Z, TAN X M. Numerical investigation of convective heat transfer on a vertical surface due to resonating cantilever beam[J]. International Journal of Thermal Sciences, 2014, 80:93-107.[9] 孔岳, 李敏, 吴蒙蒙. 压电风扇非定常流场速度分布的数值研究[J]. 工程力学, 2016, 33(1):209-216. KONG Y, LI M, WU M M. Numerical investigation on the velocity of unsteady flow field induced by piezoelectric fan[J]. Engineering Mechanics, 2016, 33(1):209-216(in Chinese).[10] ACIKALIN T, WAIT S M, GARIMELLA S V, et al. Experimental investigation of the thermal performance of piezoelectric fans[J]. Heat Transfer Engineering, 2004, 25(1):4-14.[11] ACIKALIN T, GARIMELLA S V, RAMAN A, et al. Characterization and optimization of the thermal performance of miniature piezoelectric fans[J]. International Journal of Heat and Fluid Flow, 2007, 28(4):806-820.[12] ACIKALIN T, GARIMELLA S V. Analysis and prediction of the thermal performance of piezoelectrically actuated fans[J]. Heat Transfer Engineer, 2009, 30(6):487-498.[13] KIMBER M, GARIMELLA S V, RAMAN A. Local heat transfer coefficients induced by piezoelectrically actuated vibrating cantilevers[J]. ASME Journal of Heat Transfer, 2007, 129(9):1168-1176.[14] KIMBER M, GARIMELLA S V. Measurement and prediction of the cooling characteristics of a generalized vibrating piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2009, 52(19-20):4470-4478.[15] LIU S F, HUANG R T, SHEU W J, et al. Heat transfer by a piezoelectric fan on a flat surface subject to the influence of horizontal/vertical arrangement[J]. International Journal of Heat and Mass Transfer, 2009, 52(11-12):2565-2570.[16] LIN C N. Analysis of three-dimensional heat and flow induced by piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2012, 55(11-12):3043-3053.[17] LIN C N. Enhanced heat transfer performance of cylindrical surface by piezoelectric fan under forced convection conditions[J]. International Journal of Heat and Mass Transfer, 2013, 60:296-308.[18] JENG T M, LIU C H. Moving-orientation and position effects of the piezoelectric fan on thermal characteristics of the heat sink partially filled in a channel with axial flow[J]. International Journal of Heat and Mass Transfer, 2015, 85:950-964.[19] 李鑫郡, 张靖周, 谭晓茗. 单个压电风扇传热特性研究[J]. 航空学报, 2017, 38(7):120982. LI X J, ZHANG J Z, TAN X M. Characteristics of heat transfer with a single piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7):120982(in Chinese).[20] JEONG J, HUSSAIN F. On the definition of a vortex[J]. Journal of Fluid Mechanics, 1995, 285:69-94.

Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Mei ZHENG, Lijuan FENG, Na QIN, Jinge YIN. 3D computational method for conjugate heat transfer between internal and external flow of nacelle anti-icing system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627425-627425.
[2]	XIAHOU Tangfan, CHEN Jiangtao, SHAO Zhidong, WU Xiaojun, LIU Yu. Model validation metrics for CFD numerical simulation under aleatory and epistemic uncertainty [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 25716-025716.
[3]	YANG Jiankai, GU Dongdong, GE Qing, TAN Chenchen, WEN Yu. Support layout and precise forming mechanism of aluminum alloy for laser additive manufacturing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525331-525331.
[4]	JIANG Youxu, LI Jie, YANG Zhao. Data correction method of wind tunnel test for verification aircraft with laminar wing section [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526814-526814.
[5]	WANG Hao, ZHONG Min, HUA Jun, ZHONG Hai, YANG Tihao, WANG Meng, LEI Guodong. Simulation and experiment of natural laminar flow flight test wing glove [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526785-526785.
[6]	DUAN Junyi, TONG Fulin, LI Xinliang, LIU Hongwei. Decomposition of mean friction drag in compression-expansion turbulent boundary layer [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 625915-625915.
[7]	SHEN Pengfei, LIU Pengxin, SUN Dong, YUAN Xianxu. Statistical characteristics of skin friction of shock wave/turbulent boundary layer interaction in hollow cylinder-flare configuration at Mach 6 [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 626005-626005.
[8]	LIU Pengxin, YUAN Xianxu, LIANG Fei, LI Chen, SUN Dong. Quadrant decomposition analysis of fluctuations in high-temperature turbulent boundary layer with chemical non-equilibrium [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(S1): 726338-726338.
[9]	BAO Jun, WANG Yu, NIU Qian, ZHU Xidong, CHENG Jianjie. Influencing parameters and film flow mechanism of spray droplet impacting liquid film [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(S1): 726360-726360.
[10]	CHEN Chongpei, LIANG Jianhan, GUAN Qingdi, GAO Tianyun. Conservative compressible one-dimensional turbulence method and its application in supersonic scalar mixing layer [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(S1): 726364-726364.
[11]	LI Qing, TU Guohua, YU Zhaosheng, LIN Zhaowu, LI Tingting, YUAN Xianxu. Inertial particle transport in non-uniform accelerated flow [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(S1): 726390-726390.
[12]	LYU Yuanwei, ZHANG Jingzhou, SHAN Yong, SUN Wenjing. Convective heat transfer of chevron-nozzle jet impingement on semi-circular surfaces [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 124762-124762.
[13]	LI Chengcheng, LI Fang, YANG Bin, WANG Ying. Numerical investigation of nozzle flow separation control using plasma actuation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 124547-124547.
[14]	HE Chuangxin, DENG Zhiwen, LIU Yingzheng. Turbulent flow data assimilation and its applications [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(4): 524704-524704.
[15]	LIU Zongxing, LIU Jun, LI Weina. Dynamic response and failure of typical fuselage structure under blast impact load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 224252-224252.