基于弹簧质量模型的复合材料螺接修理载荷传递计算方法

doi:10.7527/S1000-6893.2016.0211

Abstract

Abstract:

Composite bolted repair provides the advantages of easy operation, fast processing and reliable performance, making it a preferable repair method for damaged composite structure, especially for battle damage repair. However, the repair design process is complex, and it is difficult to meet the need for rapid determination of parameters. In this paper, a simple method for estimate the load transfer in composite bolted repair is proposed based on the spring-mass model. The skin and the patch are first assumed to be of the same width. The model is then modified and applied to the bolted repair joint where the width of the skin is larger than that of the patch by introducing the principle of load transfer in materials according to their stiffness. The calculation method for equivalent stiffness of the damaged skin is discussed integrating the micromechanical method and the homogenization method. The calculation method for the equivalent bolt stiffness is given and proven to meet the principle of superposition for regular arrangement of bolts. The proposed method is validated by applying it to analyze the repair of damaged composite skin plate with a circular hole. The method is also compared with the finite element method (FEM). The results show that the predicted results by the proposed method agree well with those by the FEM, with the maximum error being 7.7%. The model could be used for efficient and accurate design and analysis of composite bolted repair joint.

Key words: composites, bolted repair, load transfer, bolt load distribution, spring-mass model

CLC Number:

XIE Zonghong, LI Xiang, YANG Linya, WU Shi. A calculation method for load transfer in bolted repair of composite laminates based on spring-mass model[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(12): 3742-3751.

References

[1] 聂恒昌, 谭日明, 郭霞, 等. 复合材料层合板机械连接修理拉伸性能[J]. 北京航空航天大学学报, 2016, 42(2):318-327. NIE H C, TAN R M, GUO X, et al. Tensile performances of mechanically fastened repairs of composite laminates[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(2):318-327(in Chinese).
[2] 杜奎, 黎增山, 何为, 等. 机械连接修理对圆孔应力集中系数影响研究[C]//第十四届中国科协年会第11分会场:低成本、高性能复合材料发展论坛论文集. 北京:中国科学技术协会, 2012:22-27. DU K, LI Z S, HE W, et al. The influence of mechanical connection repair for circle hole stress concentration coefficient[C]//Proceedings of the 14th Annual Meeting of China Association for Science Technology 11th Session:Forum on Development of Low Cost, High Performance Composite Materials. Beijing:China Association of Science and Technology, 2012:22-27(in Chinese).
[3] 赵美英, 万小朋, 刘浩. 复合材料螺接修补参数优化[J]. 航空学报, 2001, 22(5):458-460. ZHAO M Y, WAN X P, LIU H. Optimization of composite patch bolted repairing parameters[J]. Acta Aeronautica et Astronautica Sinica, 2001, 22(5):458-460(in Chinese).
[4] BORTMAN J, SZABO B A. Analysis of fastened structural connections[J]. AIAA Journal, 1992, 30(11):2758-2764.
[5] SHI G Q, POON C, XIONG Y X. Finite element design and analysis of a bolted patch repair for composites[C]//42nd AIAA/ASME/ASC Structures, Structural Dynamics and Materials Conference. Reston:AIAA, 2001:1-10.
[6] BARUT A, GUVEN I, MADENCI E. An analytical method for evaluating bolted joint repairs in composite structures[C]//52nd AIAA/ASME/ASC Structures, St-ructural Dynamics and Materials Conference. Reston:AIAA, 2011:1-15.
[7] KRADINOV V, HANAUSKA J, BARUT A, et al. Bolted patch repair of composite panels with a cutout[J]. Composite Structures, 2002, 56(4):423-444.
[8] ZHANG J M. Design and analysis of mechanically fastened composite joints and repairs[J]. Engineering Analysis with Boundary Elements, 2001, 25(6):431-441.
[9] TATE M B, ROSENFELD S J. Preliminary investigation of the loads carried by individual bolts in bolted joints:NACA TN-1051[R]. Washington, D.C.:NACA, 1946.
[10] NELSON W D, BUNIN B L, HART-SMITH L J. Critical joints in large composite aircraft structures:NASA CR-3710[R]. Washington, D.C.:NASA, 1983.
[11] MCCARTHY M A, MCCARTHY C T, PADHI G S. A simple method for determining the effect of bolt-hole clearance on load distribution in single-column multi-bolt composite joints[J]. Composite Structures, 2006, 73(1):78-87.
[12] MCCARTHY C T, GRAY P J. An analytical model for the prediction of load distribution in highly torque multi-bolt composite joints[J]. Composite Structures, 2011, 93(2):287-298.
[13] 谢宗蕻, 李想, 郭家平, 等. 考虑间隙配合的复合材料钉载分配均匀化方法[J]. 复合材料学报, 2016, 33(4):806-813. XIE Z H, LI X, GUO J P, et al. Load distribution homogenization method of multi-bolt composite joint with consideration of bolt-hole clearance[J]. Acta Materiae Compositae Sinica, 2016, 33(4):806-813(in Chinese).
[14] HER S C, SHIE D L. The failure analysis of bolted repair on composite laminates[J]. International Journal of Solids and Structures, 1998, 35(15):1679-1693.
[15] 康健. 基于均匀化方法的材料参数化优化设计研究[D]. 大连:大连理工大学, 2006:15-25. KANG J. Parametric optimization design for material properties based-on homogenization method[D]. Dalian:Dalian University of Technology, 2006:15-25(in Chinese).
[16] HASSANI B, HINRON E. A review of homogenization and topology optimization II-Analytical and numerical solution of homogenization equations[J]. Computers & Structures, 1998, 69(6):719-738.
[17] 谢鸣九. 复合材料连接手册[M]. 上海:上海交通大学出版社, 2011:132-133, 172-173. XIE M J. Joints for composite materials book[M]. Shanghai:Shanghai Jiao Tong University Press, 2011:132-133, 172-173(in Chinese).
[18] SZABO B A, BASUŠKA I. Introduction to finite element analysis:Formulation, verification and validation[M]. West Sussex:John Wiley & Sons, Ltd., 2011:145-165.
[19] ACTIS R L, SZABO B A. Analysis of bonded and fastened repairs by the p-version of the finite-element method[J]. Computers & Mathematics with Applications, 2003, 46(1):1-14.

A calculation method for load transfer in bolted repair of composite laminates based on spring-mass model

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	YANG Huan, LIU Xiaochuan, BAI Chunyu, ZHANG Yu, XI Xulong. Experiment on longitudinal dynamic impact characteristics of typical aircraft seat/occupant system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526238-526238.
[2]	ZOU Qi, YE Yiyun, JIAO Junke, WU Zhisheng, XU Zifa, ZHANG Wenwu. Performance analysis of carbon fiber reinforced thermalsetting composite-titanium alloy laser joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625037-625037.
[3]	YANG Zhangang, SUI Zheng, ZHANG Qihao, LIU Jianying. Voltage drop in composite aircraft grounding and current return network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 324859-324859.
[4]	ZHAO Chenwei, MAO Junkui, TU Zecan, QIU Penglin. Thermal analysis methods for high-temperature ceramic matrix composite components: Review and prospect [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 24126-024126.
[5]	WEN Liwei, YU Kun, HUAN Huasong. Finite element numerical simulation of stitched composite T-joint under tensile load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 224231-224231.
[6]	CHEN Xiangming, CHEN Puhui, SUN Xiasheng, WANG Binwen, WANG Zhe, ZHANG Hui, CHAI Yanan. Buckling interaction formulae of composite plates under combined axial compression/tension and shear loads [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 225417-225417.
[7]	WAN Min, DU Yuxuan, ZHANG Weihong, YANG Yun. Cutting force modeling in helical milling process of unidirectional CFRP [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524134-524134.
[8]	HUANG Hongyan, SU Lijun, LEI Chaoshuai, LI Jian, ZHANG Enshuang, LI Wenjing, YANG Jieying, ZHAO Yingmin, PEI Yuchen, ZHANG Hao. Reusable thermal protective materials: application and research progress [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(12): 23716-023716.
[9]	SONG Guilin, WANG Xianfeng, ZHAO Cong, GAO Tiancheng, XUE Ke. Fiber placement trajectory planning and tows increase or decrease algorithm for revolution body [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 423704-423704.
[10]	ZHENG Changsheng, LIANG Sen, CHEN Jing, LIANG Hengliang. Low-temperature co-cured high damping composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(8): 422721-422721.
[11]	LI Xiangjun, LI Yanbin, GUO Fei, WU Shaoqing. Compression strength distribution and reliability assessment of C/C composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(8): 222853-222853.
[12]	DING Wenfeng, XI Xinxin, ZHAN Jinghua, XU Jiuhua, FU Yucan, SU Honghua. Research status and future development of grinding technology of titanium materials for aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 22763-022763.
[13]	LI Peng, ZHOU Wanlin, LI Bei, SHAO Jintao. Pin-load distribution homogenization method of adjusting bolt-hole clearance and bolt torqued in multi-bolt composite joints [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(3): 422548-422548.
[14]	DUAN Mufeng, QIN Tianliang, SHEN Yufeng, XU Jifeng. Minimum gap layup algorithms for automatic fiber placement and manufacture of conic composite structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(2): 522423-522423.
[15]	XIONG Wenlei, SU Jiazhi, LIU Xiaolin, HAN Xiaoyong, QI Jingge, SONG Tiancheng. Stringer deformation problems of panels stiffened with hat stringer in autoclave process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(12): 423108-423108.