大型壁板自动钻铆定位误差分析与优化

doi:10.7527/S1000-6893.2015.0221

Abstract

Abstract:

In the process of automatic drilling and riveting for large-sized wing panels, the mapping relationship between their practical poses and theoretical poses could not be established accurately due to the large locating errors. Nevertheless, the error compensation process is complicated, which leads to low efficiency in aircraft assembly. Focusing on compensation method through fixture design, locating errors tracing analysis and optimization approach for the layout of locating points are studied aiming to control the locating errors during locating of large-sized wing panels. First, locating errors tracing analysis is carried out according to the process flow of automatic drilling and riveting. The sources of the errors and the propagation mechanism are analyzed. Second, the locating variation propagation process is divided in two sub-process, rigid part and flexible part. For the rigid part, the Monte-Carlo method and the homogeneous transformation method are applied to analyzing the produce and propagation of the errors respectively. As to flexible part, the deformation error of each key feature points on the wing panel is calculated utilizing the finite-element method. Third, combing the rigid part and flexible part, the locating error distributing law is analyzed based on the confidence degree. Fourth, parameterized models are developed using Abaqus scripting language, and the layout of locating points is optimized based on NSGA-II by the means of backstage calling and assignment planning using Isight. Finally, a wing panel of X-type aircraft is used to validate the methodology proposed, which demonstrates the technical feasibility of the methodology.

Key words: automatic drilling and riveting, locating errors, layout of locating points, homogeneous transformation, Monte-Carlo method, multi-objective optimization

CLC Number:

QI Zhenchao, ZHANG Kaifu, LI Yuan, CHENG Hui. Analysis and optimization for locating errors of large wing panel during automatic drilling and riveting[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(10): 3439-3449.

References

[1] Yang P, Guo Y Z, Li Y L, et al. Dynamic mechanical test of aeronautic rivets[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(11): 3012-3024 (in Chinese). 杨沛, 郭亚洲, 李玉龙, 等. 航空铆钉的动态力学性能测试[J]. 航空学报, 2014, 35(11): 3012-3024.
[2] Han F, Tian W, Liao W H, et al. Normal posture adjustment algorithm for lightweight auto-crawling drilling and riveting system based on parallel mechanism[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6): 2083-2090 (in Chinese). 韩锋, 田威, 廖文和, 等. 基于并联机构的轻型自主爬行钻铆系统法向调姿算法[J]. 航空学报, 2015, 36(6): 2083-2090.
[3] Qin X S, Wang W D, Lou A L, et al. Three-point bracket regulation algorithm for drilling and riveting of aerofoil[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(6): 1455-1460 (in Chinese). 秦现生, 汪文旦, 楼阿莉, 等. 大型壁板数控钻铆的三点快速调平算法[J]. 航空学报, 2007, 28(6): 1455-1460.
[4] Yin J Q, Wang Z Q, Kang Y G. Research on riveting process in automatic rivet[J]. Aeronautical Manufacturing Technology, 2014(1): 79-83 (in Chinese). 殷俊清, 王仲奇, 康永刚. 自动钻铆环境下铆接工艺研究[J]. 航空制造技术, 2014(1): 79-83.
[5] Whitney D E. Mechanical assemblies[M]. New York: Oxford University Press, 2004: 35-38.
[6] Xu X S, Yang J X, Cao Y L, et al. Manufacturing error modeling based on homogeneous transformation[J]. Journal of Zhejiang University (Engineering Science), 2008, 42(6): 1021-1026 (in Chinese). 徐旭松, 杨将新, 曹衍龙, 等. 基于齐次坐标变换的制造误差建模研究[J]. 浙江大学学报(工学版), 2008, 42(6): 1021-1026.
[7] Liu S C, Hu S J. Variation simulation for deformable sheet metal assemblies using finite element methods[J]. Journal of Manufacturing Science and Engineering, 1997, 119(3): 368-374.
[8] Dahlström S, Lindkvist L. Variation simulation of sheet metal assemblies using the method of influence coefficients with contact modeling[J]. Journal of Manufacturing Science and Engineering, 2007, 129(3): 615-622.
[9] Jin J H, Shi J J. State space modeling of sheet metal assembly for dimensional control[J]. Transactions of the ASME, 1999, 121(4): 756-762.
[10] Cheng H, Wang R X, Li Y, et al. Modeling and analyzing of variation propagation in aeronautical thin-walled structures automated riveting[J]. Assembly Automation. 2012, 32(1): 25-37.
[11] Hoffman E G. Jig and fixture design[M]. New York: Delmar Publishers, 1991: 46-72.
[12] Rearick M, Hu S J, Wu S M. Optimal fixture design for deformable sheet metal workpieces[J]. Society of Manufacturing Engineers, 1993, 21(2): 407-412.
[13] Cai W. Otimal fixture configuration design for deformable sheet metal part assembly[D]. Michigan: The University of Michigan, 1996.
[14] Camelio J A, Hu S J, Ceglarek D. Impact of fixture design on sheet metal assembly variation[J]. Journal of Manufacturing Systems, 2004, 23(3): 182-193.
[15] Pan Z Y, Hang X, Li Y G. Research and implementation of method of layout design for large tooling in aircraft manufacture[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3): 757-762 (in Chinese). 潘志毅, 黄翔, 李迎光. 飞机制造大型工装布局设计方法研究与实现[J]. 航空学报, 2008, 29(3): 757-762.
[16] Jiang C, Han X, Zhong Z H. Locator optimization for resistance-spot-welding fixtures[J]. Journal of Mechanical Engineering, 2009, 45(4): 192-196 (in Chinese). 姜潮, 韩旭, 钟志华. 电阻点焊焊装夹具定位点的优化设计[J]. 机械工程学报, 2009, 45(4): 192-196.
[17] Shi H Y, Liu Y, Yu S J. The locators' layout optimization for flexible sheet metal workpiece using the genetic algorithm[J]. Mechanical Science and Technology, 2012, 31(7): 1145-1149 (in Chinese). 石患云, 刘渝, 余时建. 基于遗传算法的柔性薄板冲压件定位位置优化设计[J]. 机械科学与技术, 2012, 31(7): 1145-1149.
[18] Cheng H, Li Y, Zhang K F, et al. Optimization method of fixture layout for aeronautical thin-walled structures with automated riveting[J]. Assembly Automation, 2012, 32(4): 323-332.
[19] Mu W Q. Research on deformation analysis and compensation of work frame in various position for automatic drill-riveting system[D]. Xi'an: Northwestern Polytechnical University, 2011 (in Chinese). 牟伟强. 自动钻铆系统托架多姿态变形分析及补偿研究[D]. 西安: 西北工业大学, 2011.
[20] Rubinstein R Y, Kroese D P. Simulation and the Monte Carlo method[M]. New York: John Wiley & Sons, 2011: 5-9.
[21] Shen A W, Guo J L, Wang Z J, et al. Validity analysis of reliability evaluation method in aviation equipment field data[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(5): 1311-1318 (in Chinese). 沈安慰, 郭基联, 王卓健, 等. 航空装备现场数据可靠性评估方法有效性分析[J]. 航空学报, 2014, 35(5): 1311-1318.
[22] Davis L. Handbook of genetic algorithms[M]. New York: Van Nostrand Reinhold, 1991: 99-102.
[23] Srinivas N, Deb K. Multiobjective optimization using nondominated sorting in genetic algorithms[J]. Evolutionary Computation, 1994, 2(3): 221-248.
[24] Deb K, Pratap A, Agarwal S, et al. A fast and elitist multiobjective genetic algorithm: NSGA-II[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182-197.

Analysis and optimization for locating errors of large wing panel during automatic drilling and riveting

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Qian YANG, Haoran ZHENG, Xianda CHENG, Wei DONG. Optimization design method for hot air anti⁃icing system based on bleed air control [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729285-729285.
[2]	Jiezhong DONG, Wuli CHU, Haoguang ZHANG, Bo LUO, Song YAN. Flow control mechanism of diffuser cascade with wavy leading⁃edge based on causal network analysis [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(19): 128336-128336.
[3]	Chao LIANG, Li YANG, Chengsheng PAN, Yaowen QI. Multi-QoS constraints routing algorithm based on satellite network dynamic resource graph [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 326422-326422.
[4]	ZOU Ziyuan, CHEN Qifeng. Decision tree-based target assignment for confrontation of multiple space vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S1): 726910-726910.
[5]	SUN Gang, PENG Shuang, CHEN Hao, WU Jiangjiang, LI Jun. Multi-objective optimization method oriented to integrated scenario of TT & C resources and data transmission resources [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 326114-326114.
[6]	ZHENG Shuai, WANG Zihan, ZHAO Haoran, YANG Pengtao, HONG Jun. Layout optimization method of aircraft fuel gauging sensor based on differential evolution algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 125809-125809.
[7]	JING Tao, TIAN Xitian. Multi-objective optimization method for aircraft tolerance allocation based on Monte Carlo-adaptive differential evolution algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425278-425278.
[8]	LUO Qing, ZHANG Tao, SHAN Peng, ZHANG Wentao, LIU Zihao. Generating reconfiguration blueprints for IMA systems based on improved Q-learning [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(8): 525792-525792.
[9]	ZHANG Junfeng, YOU Lubao, YANG Chunwei, HU Rong. Arrival sequencing and scheduling based on multi-objective Imperialist competitive algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 324439-324439.
[10]	SUN Gang, CHEN Hao, PENG Shuang, DU Chun, LI Jun. Multi-objective optimization algorithm for satellite range scheduling based on preference MOEA [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(4): 524475-524475.
[11]	HE Cheng, MA Dongli, JIA Yuhong, YANG Muqing, CHEN Gang. Multi-objective optimization design for joined-wing SensorCraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 224761-224761.
[12]	LIU Jixin, JIANG Hao, DONG Xinfang, LAN Sijie, WANG Haozhe. Dynamic collaborative sequencing method for arrival flights based on air traffic density [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 323717-323717.
[13]	SUN Junfeng, ZHOU Zhu, HUANG Yong, PANG Yufei, LU Fengshun, XU Yong. Digital integrated platform for universal aircraft aerodynamic design optimization: DIPasda [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623348-623348.
[14]	LI Runze, ZHANG Yufei, CHEN Haixin. Strategies and methods for multi-objective aerodynamic optimization design for supercritical wings [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623409-623409.
[15]	PAN Chengsheng, XING Guixuan, QI Yaowen, YANG Li. Topological generation and optimization method in multi-state space information network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(4): 323546-323546.