自动消除主动磁悬浮轴承系统保护间隙机构的运动学分析

doi:10.7527/S1000-6893.2014.0289

Abstract

Abstract:

An auto-eliminating clearance auxiliary bearing device which can automatically eliminate the protective clearance in active magnetic bearing system after rotor dropping is presented. Firstly, its mechanical structure and working principles are introduced. Secondly, the device's degree of freedom is kinematically analyzed. Moreover, for two different structures of devices, the influences of the devices' radial dimension, the distance between the swing center of support and the center of the pin hole in link rod, the size of the clearance between the pin and pin hole in link rod on the maximum swing angle of the supports in these two devices are compared. Finally, the maximum swing angles of those supports in each situation are experimentally verified. The results show that compared with the device with the structure that the swing centers of supports are located at the outer side of the link rod, supports in the device in which the swing centers are placed in the inner side of the link rod could swing to a greater angle. According to these results, the design criterion of the main structure parameters of auto-eliminating clearance auxiliary bearing is given. The results provide a theoretical basis for the design and use of this auxiliary bearing in active magnetic bearing systems.

Key words: active magnetic bearing, auxiliary bearing, auto-eliminating clearance device, support, rotor drop

CLC Number:

YU Chengtao, XU Longxiang, JIN Chaowu. Kinematic analysis of auto-eliminating protective clearance device for active magnetic bearing systems[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(7): 2485-2496.

References

[1] Gerhard S, Maslen E H. Magnetic bearings theory, design, and application to rotating machinery[M]. New York: Springer, 2009: 1-26.
[2] Yu L. Controllable magnetic suspension rotor system [M]. Beijing: Science Press, 2003: 1-7 (in Chinese). 虞烈. 可控磁悬浮转子系统[M]. 北京: 科学出版社, 2003: 1-7.
[3] Antkowiak B M, Nelson F C. Rotor dynamic modeling of an active magnetic bearing gas turbine engine[C]// ASME Turbo Expo 1997. Orlando: American Society of Mechanical Engineers, 1997.
[4] Iannello V. Magnetic bearing systems for gas turbine engines[C]//Proceedings of MAG'95, 1995: 77-86.
[5] Storace A F, Sood D, Lyons J P, et al. Integration of magnetic bearings in the design of advanced gas turbine engines[J]. Journal of Engineering for Gas Turbines and Power, 1995, 117(4): 655-665.
[6] Meeks C, Mcmullen P, Hibner D, et al. Lightweight magnetic bearing system for aircraft gas turbine engines[C]//Proceeding of the Fourth International Symposium on Magnetic Bearings, 1994: 429-434.
[7] Ohsawa M, Yoshida K, Ninomiya H, et al. High-temperature blower for molten carbonate fuel cell supported by magnetic bearings[C]//Proceeding of the Sixth International Symposium on Magnetic Bearings, 1998: 32-41.
[8] Xu L X, Wang L T, Schweitzer G. Development of magnetic bearings for high temperature suspensions[C]//Proceedings of the Seventh International Symposium on Magnetic Bearings, 2000: 117-122.
[9] Xu L X, Zhou B. The current situation and development trend for more-electric gas turbine engines[J]. Journal of Aerospace Power, 2003, 18(1): 51-59 (in Chinese). 徐龙祥, 周波. 磁浮多电航空发动机的研究现状及关键技术[J]. 航空动力学报, 2003, 18(1): 51-59.
[10] Jin C W, Xu L X, Zhu Y L. Research on displacement sensor of high temperature active magnetic bearing[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(1): 230-239 (in Chinese). 金超武, 徐龙祥, 朱益利. 高温磁悬浮轴承用位移传感器的研究[J]. 航空学报, 2014, 35(1): 230-239.
[11] Ishii T, Kirk R G. Transient response technique applied to active magnetic bearing machinery during rotor drop[J]. Journal of Vibration and Acoustics, 1996, 118(2): 154-163.
[12] Keogh P S, Cole M O T. Rotor vibration with auxiliary bearing contact in magnetic bearing systems Part 1: Synchronous dynamics[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2003, 217(4): 377-392.
[13] Ohura Y, Ueda K, Sugita S. Performance of touchdown bearings for turbo molecular pumps[C]//Proceeding of the Eighth International Symposium on Magnetic Bearings, 2002: 515-520.
[14] Zeng S. Modelling and experimental study of the transient response of an active magnetic bearing rotor during rotor drop on back-up bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2003, 217(6): 505-517.
[15] Cuesta E N, Montbrun N I, Rastelli V, et al. Simple model for a magnetic bearing system operating on the auxiliary bearing[C]// ASME Turbo Expo 2005. Nevada: International Gas Turbine Institute, 2005: 891-898.
[16] Sun G. Rotor drop and following thermal growth simulations using detailed auxiliary bearing and damper models[J]. Journal of Sound and Vibration, 2006, 289(1-2): 334-359.
[17] Schweitzer G. Safety and reliability aspects for active magnetic bearing applications—a survey[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2005, 219(6): 383-392.
[18] Clark D J, Jansen M J, Montagure G T. An overview of magnetic bearing technology for gas turbine engines, NASA/TM-2004-213177[R]. Washington, D.C.: NASA,2004.
[19] Chen H M, Walton J, Heshmat H. Zero clearance auxiliary bearings for magnetic bearing systems[C]//ASME Turbo Expo 1997. Orlando: American Society of Mechanical Engineers, 1997.
[20] Salehi M, Heshmat H. On the dynamic and thermal performance of a zero clearance auxiliary bearing (zcab) for a magnetic bearing system[J]. Tribology Transaction, 2000, 43(3): 435-440.
[21] Yu L, Geng H P, Qi S M, et al. Compliant foil bearings used as emergence bearings[C]//Proceedings of the Ninth International Symposium on Magnetic Bearings, 2004: 129-136.
[22] Swanson E E, Heshmat H, Walton J F. Performance of a foil-magnetic hybrid bearing[J]. Journal of Engineering for Gas Turbines and Power, 2002, 124(2): 375-382.
[23] Dellacorte C, Valco M J. Load capacity estimation of foil air journal bearings for oil-free turbomachinery applications, NASA/TM-2000-209782[R]. Washington, D.C.: NASA, 2000.
[24] Wu L S, Chen H, Shi T L, et al. Design of a new-style assistant bearing of magnetic bearing[J]. Machinery Design and Manufacture, 2010(3): 32-34 (in Chinese). 伍良生, 陈浩, 史铁林, 等. 一种新型的电磁轴承系统辅助轴承的设计[J]. 机械设计及与制造, 2010(3): 32-34.

Kinematic analysis of auto-eliminating protective clearance device for active magnetic bearing systems

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Qian YANG, Xiaofeng GUO, Qin LI, Wei DONG. Hot air anti-icing performance estimation method based on POD and surrogate model [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 626992-626992.
[2]	YANG Jiankai, GU Dongdong, GE Qing, TAN Chenchen, WEN Yu. Support layout and precise forming mechanism of aluminum alloy for laser additive manufacturing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525331-525331.
[3]	YI Bingli, LIU Boyu, WANG Zhengqu, ZHANG Tiejun, LU Dan, ZHAO Yan. Test technology of twin-sting supports in 1.2 m high speed wind tunnel [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526794-526794.
[4]	LIU Hu, LIU Siliang, TIAN Yongliang, HUANG Xin, ZHAO Qinping. Virtual open scenario construction for system of systems oriented design and application [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527504-527504.
[5]	WANG Yongqing. Fixed-wing carrier-based aircraft: Key technologies and future development [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(8): 525859-525859.
[6]	CHEN Zhiqiang, LIU Zhanhe, MIAO Nan, FENG Wei. Parametric reduced-order model of unsteady aerodynamics based on incremental learning algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 125103-125103.
[7]	YANG Fengtian, FAN Zhenwei, XIANG Song, LIU Yuanqiang, ZHAO Weiping. Technical innovation and practice of electric aircraft in China [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 624619-624619.
[8]	MA Shuai, ZHANG Lu, LIU Fan, SUN Junfeng, CUI Xingda. Numerical simulation of correlation analysis of X-37B-like spacecraft's aerodynamic datum between flight and ground prediction [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 624010-624010.
[9]	WU Zhongbo, YI Jianqiang. Cooperative communication relay selection method for UAV formation support networks [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(S2): 724319-724319.
[10]	CHEN Senlin, GAO Zhenghong, ZHU Xinqi, PANG Chao, DU Yiming, CHEN Shusheng. Unsteady aerodynamic modeling of unstable dynamic process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(8): 123675-123675.
[11]	ZU Guangran, PEI Yang, HOU Peng. Review of aircraft battle damage assessment and repair estimation and design technology [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523455-523455.
[12]	BAO Xiaoning, ZHAO Peilin, ZHANG Baozhong, HU Zhiwen, LAN Yuqing, XUE Fei. Life support system in advanced fighter [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523464-523464.
[13]	HE Qiang, TAN Deqiang, CHENG Lin. Eye movement and fatigue detection in visual inspection of civil aircraft composite materials [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 223532-223532.
[14]	ZHANG Jie, PANG Liping, WANYAN Xiaoru, CHEN Hao, WANG Xin, LIANG Jin. Method for operator mental workload assessment based on power spectral density of EEG [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 123618-123618.
[15]	LUO Peng, WANG Buhong, LI Tengyao. ADS-B anomaly data detection model based on BiGRU-SVDD [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 323878-323878.