考虑螺旋桨滑流影响的机翼气动优化设计

doi:10.7527/S1000-6893.2014.0044

Abstract

Abstract:

The propeller slipstream effects usually create large difference to the flow field around wings, nacelles and other parts of turboprop aircraft compared with no slipstream effect. Thus, the slipstream effects should be taken into account in aerodynamic design of wings, leading to better aerodynamic characteristics under real flying condition which includes slipstream effects. Propeller slipstream is simulated using multiple reference frames (MRF) quasi-steady method based on Reynolds-averaged Navier-Stokes equations. Free form deformation (FFD) technology is used for parameterization of wings. A grid deformation method based on radial basis functions (RBF) interpolation is embedded in optimization for rapid grid regeneration. After the aerodynamic data of wing samples is obtained, a Kriging surrogate model is trained with these original samples and iteratively improved with EI (Expected Improvement) through optimization. Combining random weighted particle swarm optimization (PSO) algorithm with aforementioned methods, the optimization system is established. The optimization design result of a certain turboprop aircraft using this optimization system indicates that the wing and nacelle of the optimized configuration have a drag reduction of 3.98 counts and lift-drag ratio increase by 3.325% in cruising state. Therefore, the numerical method and the optimization system used are practical and valuable for wing design under slipstream effects.

Key words: slipstream interaction, free form deformation technique, radial basis function, multiple reference frame, Kriging surrogate model, particle swarm optimization algorithm

CLC Number:

V221

XU Jiakuan, BAI Junqiang, HUANG Jiangtao, QIAO Lei, DONG Jianhong, LEI Wutao. Aerodynamic Optimization Design of Wing Under the Interaction of Propeller Slipstream[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(11): 2910-2920.

References

[1] Liu P Q. The theory and application of air propeller[M]. Beijing: Beihang University Press, 2006: 55-82. (in Chinese) 刘沛清. 空气螺旋桨理论及其应用[M]. 北京: 北京航空航天大学出版社, 2006: 55-82.

[2] Li B, Liang D W, Huang G P. Propeller slipstream effects on aerodynamic performance of turbo-prop airplane based on equivalent actuator disk model[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4): 846-852.(in Chinese) 李博, 梁德旺, 黄国平. 基于等效盘模型的滑流对涡桨飞机气动性能的影响[J]. 航空学报, 2008, 29(4): 846-852.

[3] Duan Y Q, Shi A M. A new and effective actuator disk model approach for the simulation of propeller slipstream [J]. Journal of Northwestern Polytechnical University, 2012, 30(6): 842-846.(in Chinese) 段义乾, 史爱明. 一种新型的螺旋桨滑流激励盘模型的研究方法[J]. 西北工业大学学报, 2012, 30(6): 842-846.

[4] Wetmoreland W S, Tramel R W, Barber J. Modeling propeller flow-fields using CFD, AIAA-2008-0402[R]. Reston: AIAA, 2008.

[5] Bryan F, Ramesh A. CFD analysis of open rotor engines using an actuator disk model, AIAA-2014-0408[R].Reston: AIAA, 2014.

[6] Xia Z F, Yang Y. Unsteady numerical simulation interaction effects of propeller and wing [J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(7): 1195-1201.(in Chinese) 夏贞锋, 杨永. 螺旋桨滑流与机翼气动干扰的非定常数值模拟[J]. 航空学报, 2011, 32(7): 1195-1201.

[7] Stuermer A W. Unsteady CFD simulations of propeller installation effects Sacramento California, AIAA-2006-4969[R]. Reston: AIAA, 2006.

[8] Yang A M, Liu J H, Weng P F. Navier-Stokes computation about a helicopter rotor in hover using chimera grids and multi-grid acceleration [J]. Acta Aerodynamica Sinica, 2009, 27(1): 6-10. (in Chinese) 杨爱明, 刘金花, 翁培奋. 基于重叠网格技术和多重网格算法的悬停旋翼粘性绕流数值模拟[J]. 空气动力学学报, 2009, 27(1): 6-10.

[9] Wen Q, Liang D W, Huang G P. Construction of MUSCL scheme in moving reference frame [J]. Journal of Nanjing University of Aeronautics & Astronautics, 2003, 35(1): 59-62.(in Chinese) 温泉, 梁德旺, 黄国平. 旋转坐标系下三维MUSCL 格式的构成[J]. 南京航空航天大学学报, 2003, 35(1): 59-62.

[10] Müller L, Ko?ulovi'c D, Hepperle M. Installation effects of a propeller over a wing with internally blown flap, AIAA-2012-3335[R]. Reston: AIAA, 2012.

[11] Nils B, Rolf R, Carsten L, et al. Aerodynamic effects of propeller slipstream on a wing with circulation control by internally blown flaps, AIAA-2014-0407[R]. Reston: AIAA, 2014.

[12] Zhu X X. The molding technology of free curve and surface[M]. Beijing: Science Press, 2000: 66-112. (in Chinese) 朱心雄. 自由曲线曲面造型技术[M]. 北京: 科学出版社, 2000: 66-112.

[13] Huang J T, Gao Z H, Bai J Q, et al. Study of robust winglet design based on arbitrary space shape FFD technique [J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(1): 37-45.(in Chinese) 黄江涛, 高正红, 白俊强, 等. 基于任意空间属性FFD技术的融合式翼梢小翼稳健型气动优化设计[J]. 航空学报, 2013, 34(1): 37-45.

[14] Yan C. Computational fluid dynamics and its application[M]. Beijing: Beihang University Press, 2006: 17-243. (in Chinese) 阎超. 计算流体力学方法及应用[M]. 北京: 北京航空航天大学出版社, 2006: 17-243.

[15] Boer A D, Schoot V D, Bijl H. Mesh deformation based on radial basis function interpolation[J]. Computers and Structures 2007, 85(11-14): 784-795.

[16] Allen C B, Rendall T C S. Unified approach to CFD/CSD interpolation and mesh motion using radial basis functions, AIAA-2007-3804[R]. Reston: AIAA, 2007.

[17] Bai J Q, Liu N, Qiu Y S, et al. Optimization of multi-foil basing on RBF moving grid method and modified particle swarm optimization algorithm[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(12): 2701-2715.(in Chinese) 白俊强, 刘南, 邱亚松, 等. 基于RBF动网格方法和改进粒子群优化算法的多段翼型优化[J]. 航空学报, 2013, 34(12): 2701-2715.

[18] Noel C. The origins of Kriging[J]. Journal of Mathematical Geology, 1990, 22(3): 239-252.

[19] Donald R J, Matthias S, William J W. Efficient global optimization of expensive black-box functions[J]. Journal of Global Optimization, 1998, 13(4): 455-492.

[20] Donald R J. A taxonomy of global optimization methods based on response surfaces[J]. Journal of Global Optimization, 2001, 21(4): 345-383.

[21] Martin J D. Robust kriging models, AIAA-2010-2854[R]. Reston: AIAA, 2010.

[22] Yang H, Song W P, Han Z H, et al. Multi-objective and multi-constrained optimization design for a helicopter rotor airfoil[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(7): 1218-1226.(in Chinese) 杨慧, 宋文萍, 韩忠华, 等. 旋翼翼型多目标多约束气动优化设计[J]. 航空学报, 2012, 33(7): 1218 -1226.

[23] Wang W B. The study and application of particle swarm optimization algorithm[D]. Chengdu: Southwest Jiaotong University, 2005.(in Chinese) 王维博. 粒子群优化算法研究及其应用[D]. 成都: 西南交通大学, 2005.

[24] Ji Z, Liao H L, Wu Q H. The algorithm and application of particle swarm[M]. Beijing: Science Press, 2008: 16-71. (in Chinese) 纪震, 廖惠连, 吴青华. 粒子群算法及应用[M]. 北京: 科学出版社, 2008: 16-71.

[25] Moens F, Gardarein P. Numerical simulation of the propeller/wing interaction for transport aircraft, AIAA-2001-2404[R]. Reston: AIAA, 2001.

Aerodynamic Optimization Design of Wing Under the Interaction of Propeller Slipstream

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Tianhe GAO, Kuo TIAN, Lei HUANG, Shu ZHANG, Zengcong LI. Data⁃driven shape⁃topology optimization method for curved shells [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(2): 428806-428806.
[2]	Siji WANG, Yuwei ZHANG, Kaiming HUANG, Biao LYU, Haifeng ZHAO, Hu WANG, Mingfu LIAO. An optimization method for helicopter power turbine rotor system based on improved particle swarm optimization algorithm [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(1): 228608-228608.
[3]	Ting YU, Luyi LI, Yushan LIU, Zeming CHANG. Efficient Bayesian updating method under observation uncertainty and its application in wing structure [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 228592-228592.
[4]	Feng JIANG, Huacong LI, Jiangfeng FU, Linxiong HONG. A RBF and active learning combined method for structural non-probabilistic reliability analysis [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 226667-226667.
[5]	WEN Qian, YANG Jiawei, WU Zeping, YANG Xixiang, ZHAO Hailong, WANG Zhixiang. An approximation modeling method of launch vehicles improved by fast cross-validation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 225967-225967.
[6]	ZHANG Ruipeng, FENG Yanxiang, YANG Yikang. Hybrid particle swarm algorithm for multi-UAV cooperative task allocation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 326011-326011.
[7]	RAO Chong, ZHANG Tiejun, WEI Chuang, LIU Ying. Influence mechanism of propeller slipstream on wing of a distributed electric aircraft scheme [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(S1): 726387-726387.
[8]	ZHANG Yang, ZHOU Zhou, GUO Jiahao. Effects of distributed electric propulsion jet on aerodynamic performance of rear wing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 224977-224977.
[9]	LIU Zhikan, LIU Shenshen, LIU Xiao, ZENG Lei, DAI Guangyue. RBF data transfer based on physical gradient modification [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 124506-124506.
[10]	SUN Yan, JIANG Meng, MENG Dehong, PANG Yufei. Formation mechanism and elimination algorithm of warping in interactive prismatic grid generation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 124443-124443.
[11]	ZHANG Zhichao, GAO Taiyuan, ZHANG Lei, TUO Shuangfen. Aeroheating agent model based on radial basis function neural network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(4): 524167-524167.
[12]	GUO Jiahao, ZHOU Zhou, FAN Zhongyun. A quick design method of propeller coupled with CFD correction [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 123216-123216.
[13]	CHEN Yicheng, QI Ruiyun, ZHANG Jiarui, WANG Huanjie. High-performance sliding mode control for orbit keeping of spacecraft using hybrid low-thrust propulsion [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(7): 322827-322827.
[14]	LI Baoyu, ZHANG Leigang, QIU Qunhai, YU Xiongqing. An advanced first order and second moment method based on gradient analytical solution of Kriging surrogate model [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(5): 222629-222629.
[15]	ZHANG Tao, LI Jiong, Wang Huaji, LEI Humin, YE Jikun. Attitude control of near space kinetic kill vehicle based on neural network backtepping control [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(8): 321953-321953.