[1] Bracke L,Verbeken K,Kestens L,et al. Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel[J]. Acta Materialia,2009,57(5): 1512-1524.[2] Hedayati A,Najafizadeh A,Kermanpur A,et al. The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel[J]. Journal of Materials Processing Technology, 2010, 210(8): 1017-1022.[3] Li L, Ungár T, Wang Y D, et al. Microstructure evolution during cold rolling in a nanocrystalline Ni-Fe alloy determined by synchrotron X-ray diffraction[J]. Acta Materialia, 2009, 57(17): 4988-5000.[4] Brahme A, Winning M, Raabe D. Prediction of cold rolling texture of steels using an artificial neural network[J]. Computational Materials Science, 2009, 46(4): 800-804.[5] Liu W C, Chen Z L, Xiao F R, et al. Effect of cold rolling on the precipitation behavior of δ phase and γ″ phase in inconel 718[J]. Acta Aeronautica et Astronautica Sinica,1999, 20(3): 279-282.(in Chinese) 刘文昌, 陈宗霖, 肖福仁, 等. 冷轧变形对Inconel718合金δ相γ″相析出行为的影响[J]. 航空学报, 1999, 20(3): 279-282.[6] Sedighi M, Mahmoodi M. An approach to simulate cold roll-forging of turbo-engine thin compressor blade[J]. Aircraft Engineering and Aerospace Technology, 2009, 81(3): 191-198.[7] Akgerman N, Lahoti G D, Altan T. Computer-aided roll pass design in rolling of airfoil shapes[J]. Journal of Applied Metalworking, 1980, 1(3): 30-40.[8] Klocke F, Mader S. Fundamentals of the deep rolling of compressor blades for turbo aircraft engines[J]. Steel Research International, 2005, 76(2-3): 229-235.[9] Gunasekera J S, Belinski R A. A Investigation of the pinch and roll process of compressor airfoil manufacture[J]. CIRP Annals-Manufacturing Technology,2000, 49(1): 181-184.[10] Yu J M, Zhang Z M, Li G J. The numerical simulation of blade rolling process[J]. Missiles and Guidance, 2006, 26(1): 833-835. (in Chinese) 于建民, 张治民, 李国俊. 叶片辊轧工艺数值模拟研究[J]. 弹箭与制导学报, 2006, 26(1): 833-835.[11] Mao J, Meng H, Chen H Y, et al. Comparative analysis and research on hot rolling and cold rolling process of aero-engine blade[J]. Hot Working Technology, 2013, 42(13): 84-86. (in Chinese) 毛君, 孟辉, 陈洪月, 等. 航空发动机叶片热轧与冷轧过程对比分析与研究[J]. 热加工工艺, 2013, 42(13): 84-86.[12] Mao J, Zhang Y, Li S L, et al. Dynamics simulation study on blade rolling process[J]. Forging & Stamping Technology, 2013, 38(1): 76-80. (in Chinese) 毛君, 张瑜, 李深亮, 等. 叶片辊轧过程动力学仿真研究[J]. 锻压技术, 2013, 38(1): 76-80.[13] Zhou D. Simulation and analysis of blade cold roll forming process[D]. Shenyang:Northeastern University, 2010. (in Chinese) 周道. 航空叶片冷辊轧过程仿真分析[D]. 沈阳:东北大学, 2010.[14] Feng Y J. Study of microstructure and mechanical property of forged and cold rolled GH4169 alloy blade[D]. Harbin: Harbin Institute of Technology, 2012. (in Chinese) 冯莹娟. 锻造-冷辊轧GH4169合金叶片组织性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2012.[15] Matin I, Hadzistevic M, Hodolic J, et al. A CAD/CAE-integrated injection mold design system for plastic products[J]. The International Journal of Advanced Manufacturing Technology, 2012, 63(5-8): 595-607.[16] Guo Y, Hu J, Peng Y H. A CBR system for injection mould design based on ontology:a case study[J]. Computer-Aided Design, 2012, 44(6): 496-508.[17] Yang H L, Tong S G, Wu R R. Automation technology of injection mold design based on case-based reasoning[J]. Chinese Journal of Mechanical Engineering, 2008, 44(10): 288-293. (in Chinese) 杨化林, 童水光, 吴荣仁. 基于范例推理的注塑模具设计自动化技术[J]. 机械工程学报, 2008, 44(10): 288-293.[18] Kumar S, Singh R. An automated design system for progressive die[J]. Expert Systems with Applications, 2011, 38(4): 4482- 4489.[19] Jiang R S, Zhang D H, Wang W H, et al. Intelligent design of investment casting mold based on a hybrid reasoning method[J]. Research & Development, 2009, 6(1): 20-23.[20] Jiang R S, Zhang D H, Wang W H. Research on the intelligent design system for investment casting die of aero-engine turbine blade based on knowledge[J]. Journal of Aerospace Power, 2010, 25(5): 1061-1067.[21] Chen J, Wang G J. Optimal parameterizations of the degree 2 rational Bézier curves[J]. Journal of Computer Research and Development, 2008, 45(9): 1601-1604. (in Chinese) 陈军, 王国瑾. 2次有理Bézier曲线的最优参数化[J]. 计算机研究与发展, 2008, 45(9): 1601-1604.[22] Zhang L N, Zhang D H, Chen Z Q. Calculation method on central arced curve of blade section based on equidistance line[J]. Journal of Machine Design, 2006, 23(5): 39-41. (in Chinese) 张力宁, 张定华, 陈志强. 基于等距线的叶片截面中弧线计算方法[J]. 机械设计, 2006, 23(5): 39-41.[23] Hu S M, Wallner J. A second order algorithm for orthogonal projection onto curves and surfaces[J]. Computer Aided Geometric Design, 2005, 22(3): 251-260.[24] Mo R, Chang Z Y. Computer-aided geometric modeling techniques[M]. Beijing: Science Press, 2009: 90-91 (in Chinese) 莫蓉, 常智勇. 计算机辅助几何造型技术[M]. 北京:科学出版社, 2009: 90-91. |