航空铆钉的动态力学性能测试

doi:10.7527/S1000-6893.2013.0506

Abstract

Abstract:

Numerical simulation is playing an important role in the research of bird strikes, the accuracy of which depends to a large extent on the dynamic mechanical properties of rivets. Despite the importance of the dynamic mechanical properties of rivets, only limited amounts of published data are available on this issue. In this paper the shear and tension mechanical properties of aluminum alloy rivets under different loading velocities are determined. To explore the dynamic shear and tension mechanical properties of rivets, shear and uniaxial tension tests are carried out by using the split Hopkinson tension bar technique. An experimental setup for testing dynamic properties of rivets is designed based on the split Hopkinson tension bar system, and dynamic shear and tension tests of seven different types of aeronautic rivets are carried out using this system. Quasi-static shear and tension tests under two strain rates are carried out by using a universal electronic testing machine, and then the results are compared with those of the dynamic tests. Further discussions reveal the effect of loading velocity, loading modes, rivet radius and rivet modes on the mechanical properties of rivets. To analyze the failure modes, a detailed observation of fracture surfaces is performed using a scanning electron microscope (SEM). The results of this study can provide some guidance for the application of aerospace aluminum alloy rivets in engineering, especially with respect to impact.

Key words: split Hopkinson tension bar, universal electronic testing machine, rivet, shear, tension, SEM

CLC Number:

V251.9

YANG Pei, GUO Yazhou, LI Yulong. Dynamic Mechanical Test of Aeronautic Rivets[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(11): 3012-3024.

References

[1] Wang Q. The numerical analysis of stress and failure mode of connecting head of C/SiC composite material[D]. Xi'an: Northwestern Polytechnical University, 2005. (in Chinese) 汪清. C/SiC复合材料连接接头应力与破坏形式数值分析[D]. 西安: 西北工业大学,2005.

[2] Wu J G. The research of theory and application of crack propagation and damage[D]. Beijing: Beihang University, 2009. (in Chinese) 吴建国. 裂纹扩展与损伤演化理论与应用研究[D]. 北京: 北京航空航天大学, 2009.

[3] Porcaro R, Hanssen A G, Aalberg A, et al. Joining of aluminium using self-piercing riveting: testing, modelling and analysis[J]. International Journal of Crashworthiness, 2004, 9(2): 141-154.

[4] Porcaro R, Hanssen A G, Langseth M, et al. The behaviour of a self-piercing riveted connection under quasi-static loading conditions[J]. International Journal of Solids and Structures, 2006, 43(17): 5110-5131.

[5] Porcaro R, Hanssen A G, Langseth M, et al. An experimental investigation on the behaviour of self-piercing riveted connections in aluminium alloy AA6060[J]. International Journal of Crashworthiness, 2006, 11(5): 397-417.

[6] Lennon R, Pedreschi R, Sinha B P. Comparative study of some mechanical connections in cold formed steel[J]. Construction and Building Materials, 1999, 13(3): 109-116.

[7] Dilorenzo G, Landolfo R. Shear experimental response of new connecting systems for cold-formed structures[J]. Journal of Constructional Steel Research, 2004, 60(3-5): 561-579.

[8] Sun X, Stephens E V, Khaleel M A. Fatigue behaviours of self-piercing rivets joining similar and dissimilar sheet metals[J]. International Journal of Fatigue, 2007, 29(2): 370-386.

[9] Li B, Fatemi A. An experimental investigation of deformation and fatigue behaviour of coach peel riveted joints[J]. International Journal of Fatigue, 2006, 28(1): 9-18.

[10] Fu M, Mallick P K. Fatigue of self-piercing riveted joints in aluminium alloy 6111[J]. International Journal of Fatigue, 2003, 25(3): 183-189.

[11] Han L, Chrysanthou A, O'Sullivan J M. Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions[J]. Materials and Design, 2006, 27(3): 200-208.

[12] Lee M H, Kim H Y, Oh S I. Crushing test of double hat-shaped members of dissimilar materials with adhe sively bonded and self-piercing riveted joining methods[J]. Thin-Walled Structures, 2006, 44(4): 381-386.

[13] Guo W G, Li Y L, Suo T. Brief tutorial of stress wave[M]. Xi'an: Northwestern Polytechnical University Press, 2007: 120-126. (in Chinese) 郭伟国, 李玉龙, 索涛. 应力波简明教程[M]. 西安: 西北工业大学出版社, 2007: 120-126.

[14] Wang L,Li Y L, Suo T, et al. Mechanical behavior of commonly used aeronautical aluminum alloys under dynamic tension[J]. Journal of Aeronautical Materials, 2013, 33(4): 71-77. (in Chinese) 王雷, 李玉龙, 索涛, 等. 航空常用铝合金动态拉伸力学性能探究[J]. 航空材料学报, 2013, 33(4): 71-77.

[15] Bayraktar E, Kaplan D, Buirette C, et al. Application of impact tensile testing to welded thin sheet[J]. Journal of Materials Processing Technology, 2004, 145(1): 27-39.

[16] Birch R S, Alves M. Dynamic failure of structural joint systems[J]. Thin-Walled Structures, 2000, 36(2): 137-154.

[17] Li Q M, Mines R A W, Birch R S. Static and dynamic behaviour of composite riveted joints in tension[J]. International Journal of Mechanical Sciences, 2000, 43(2001): 1591-1610.

[18] Porcaro R, Langseth M, Hanssen A G, et al. Crashworthiness of self-piercing riveted connections[J]. International Journal of Impact Engineering, 2007, 35(2008): 1251-1266.

[19] Aviation Manufacturing Engineering Handbook Total Editorial Board. Aviation manufacturing engineering handbook(aircraft assembly)[M]. 2nd ed. Beijing: Aircraft Industry Press, 1993: 227-248. (in Chinese) 航空制造工程手册总编委会. 航空制造工程手册(飞机装配)[M]. 2版. 北京: 航空工业出版社, 1993: 227-248.

[20] Tian J J, Li Y L, Hu G L, et al. Tenslie behavior and fractography of two kinds of ultra-high strength steels[J]. Ordnance Material Science and Engineering, 2009, 32(4): 31-35. (in Chinese) 田晶晶, 李玉龙, 胡广立, 等.两种超高强度钢的拉伸力学性能研究及断口分析[J]. 兵器材料科学与工程, 2009, 32(4): 31-35.

[21] MatWeb. Aluminum 2117-T4. [2013-11-05]. http://www.matweb.com.

[22] Cui Y X, Wang C L. The analysis of metal fracture surface[M]. Harbin: Harbin Institute of Technology Press, 1998: 1-45. (in Chinese) 崔约贤, 王长利. 金属断口分析[M]. 哈尔滨: 哈尔滨工业大学出版社, 1998: 1-45.

[23] Su X J, Chen Y. The analysis of metal fracture surface and atlas[M]. Beijing: Science Press, 1991:27-55. (in Chinese) 苏锡九, 陈英. 金属材料断口分析及图谱[M]. 北京: 科学出版社, 1991: 27-55.

Dynamic Mechanical Test of Aeronautic Rivets

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Kuo TIAN, Zhiyong SUN, Zengcong LI. High-precision digital twin method for structural static test monitoring [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(7): 429134-429134.
[2]	Xudong LUO, Yiquan WU, Jinlin CHEN. Research progress on deep learning methods for object detection and semantic segmentation in UAV aerial images [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(6): 28822-028822.
[3]	Weihong ZHANG, Changhong TANG. Lightweighting of aerospace and aeronautical equipment: Challenges and perspectives [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(5): 529965-529965.
[4]	Yulin GUO, Fengyu YANG, Jianfei YAO, Shiwen JIAO, Zeliang ZHANG. Multiple optimization based virtual assembly balance of multi-disk rotors considering multi-speed [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(4): 628323-628323.
[5]	Ying MA, Ao CHEN, Congying DENG, Xiang CHEN, Sheng LU, Xianjun ZENG. A multiscale mesh generation method for textile composite [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(10): 429180-429180.
[6]	Guangquan DUAN, Guoping LIU. Adaptive prescribed control of position and attitude of combined spacecraft based on fully actuated system approach [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(1): 628837-628837.
[7]	Yinglin YANG, Shinan CHANG, Qiyu SHI, Haifeng QI. Experiment of shear-driven water film [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729290-729290.
[8]	Xin SU, Runcheng GUAN, Qiao WANG, Weizheng YUAN, Xianglian LYU, Yang HE. Ice area and thickness detection method based on deep learning [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729283-729283.
[9]	Chao YANG, Kaifu ZHANG. Stress prediction of fuselage tube section based on PSO⁃BiLSTM neural network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(7): 426991-426991.
[10]	Xiaoxu HE, Pei LEI, Deng PAN, Yang YANG, Xiankun LI, Zhenbo DENG. Posture and position computing method for aircraft component based on PSO and WSVD [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(7): 427162-427162.
[11]	Liping LIU, Yuyang QI, Yueguo LIN, Rui BAO, Jianxin XU, Zhenyu FENG, Guanghui QING. Tensile failure of carbon fiber composite material bonded-rivet hybrid repaired structure [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 428676-428676.
[12]	Xiangfan NIE, Yang LI, Yazhou WANG, Quanhong WAN, Weifeng HE. Research progress and prospect of laser shock peening technology in aircraft structure [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 28595-028595.
[13]	Hang TONG, Liangji ZHANG, Ruibiao GAO, Weijie CHEN, Weiyang QIAO. Broadband noise fast evaluation method and its application in three dimensional design stage of fan [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 128606-128606.
[14]	Xiaohang LI, Jianjiang ZHOU. Multi⁃scale modality fusion network based on adaptive memory length [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(22): 628977-628977.
[15]	Yi ZHANG, Yan ZHANG, Yu ZHANG, Yong ZHANG, Di LIU. Infrared aircraft target detection method based on multi-level feature enhancement fusion [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(22): 629220-629220.