涡轮间隙泄漏涡破碎对损失的影响

doi:10.7527/S1000-6893.2013.0465

Abstract

Abstract:

Numerical investigation is performed to simulate the tip leakage vortex (TLV) breakdown characteristics and its effect on leakage losses in the first-stage rotor blade of GE-E³ (Energy Efficient Engine) turbines at various tip clearances, by solving the Reynolds-averaged Navier-Stokes equations in conjunction with a standard k-ω two-equation turbulence model. The tip leakage vortex breakdown phenomenon and its dynamics are analyzed; so are the effects of tip clearance height on the tip leakage vortex structure and the vortex breakdown characteristics. Furthermore, the relationship between the tip leakage vortex breakdown and losses is investigated. Numerical results show that the turbine tip leakage vortex is unstable. When the tip leakage vortex has sufficient strength to overcome the entrainment of the tip passage vortex, and forms a complete vortex structure, the tip leakage vortex breakdown is initiated in the adverse-pressure region of the second half of the rotor blade, which leads to extra vortex breakdown losses. The tip clearance height has a great impact on the vortex breakdown location, and the tip leakage vortex tends to be relatively stable at large tip clearances. The tip mixing losses are divided into two stages marked by the tip leakage vortex breakdown. A lot of mixing losses occur after the tip leakage vortex breakdown, which is the main part of the tip mixing losses.

Key words: turbine, tip leakage flow, vortex breakdown, tip clearance height, aerodynamic loss

CLC Number:

V231.3

GAO Jie, ZHENG Qun, XU Tianbang, ZHANG Zhengyi. Effect of Tip Leakage Vortex Breakdown on Losses in Turbines[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(5): 1257-1264.

References

[1] Bunker R S. Axial turbine blade tips: function, design, and durability[J]. Journal of Propulsion and Power, 2006, 22(2): 271-285.

[2] Xiao X W, McCarter A A, Lakshminarayana B. Tip clearance effects in a turbine rotor: Part I－Pressure field and loss[J]. Journal of Turbomachinery, 2001, 123(2): 296-304.

[3] McCarter A A, Xiao X W, Lakshminarayana B. Tip clearance effects in a turbine rotor: Part II－Velocity field and flow physics[J]. Journal of Turbomachinery, 2001, 123(2): 305-313.

[4] Sun H, Li J, Feng Z P. Effects of tip clearance on unsteady flow characteristics in an axial turbine stage, ASME Paper, GT-2009-59828. New York: ASME, 2009.

[5] Gao J, Zheng Q. Effect of squealer tip geometry on rotor blade aerodynamic performance[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 218-226. (in Chinese) 高杰, 郑群. 叶顶凹槽形态对动叶气动性能的影响[J]. 航空学报, 2013, 34(2): 218-226.

[6] Lee S W, Kim S U, Kim K H. Aerodynamic performance of winglets covering the tip gap inlet in a turbine cascade[J]. International Journal of Heat and Fluid Flow, 2012, 34: 36-46.

[7] Gao J, Zheng Q, Yue G Q. Reduction of tip clearance losses in an unshrouded turbine by rotor-casing contouring[J]. Journal of Propulsion and Power, 2012, 28(5): 936-945.

[8] Niu M S, Zang S S. Experimental and numerical investigations of tip injection on tip clearance flow in an axial turbine cascade[J]. Experimental Thermal and Fluid Science, 2011, 35(6): 1214-1222.

[9] Tallman J, Lakshminarayana B. Methods for desensitizing tip clearance effects in turbines, ASME Paper, GT-2001-0486. New York: ASME, 2001.

[10] Yin X Y, Sun D J. Vortex stability[M]. Beijing: National Defense Industry Press, 2003: 182-190. (in Chinese) 尹协远, 孙德军. 旋涡流动的稳定性[M]. 北京: 国防工业出版社, 2003: 182-190.

[11] Sell M, Treiber M, Casciaro C, et al. Tip-clearance-affected flow fields in a turbine blade row[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1999, 213(4): 309-318.

[12] Li W, Qiao W Y, Xu K F. Unsteadiness of tip clearance vortex in turbine[J]. Journal of Propulsion Technology, 2008, 29(2): 204-207. (in Chinese) 李伟, 乔渭阳, 许开富. 涡轮叶尖间隙泄漏涡不稳定性分析[J]. 推进技术, 2008, 29(2): 204-207.

[13] Huang A C, Greitzer E M, Tan C S, et al. Blade loading effects on axial turbine tip leakage vortex dynamics and loss, ASME Paper, GT-2012-68302. New York: ASME, 2012.

[14] Wang S T, Wu M, Wang Z Q, et al. The effect of passage vortex stability on energy loss[J]. Journal of Engineering Thermophysics, 2000, 21(4): 425-429. (in Chinese) 王松涛, 吴猛, 王仲奇, 等. 通道涡稳定性及对损失的影响[J]. 工程热物理学报, 2000, 21(4): 425-429.

[15] Timko L P. Energy efficient engine high pressure turbine component test performance report, NASA CR-168289. Washington, D.C.: NASA, 1984.

[16] Ameri A A, Steinthorsson E, Rigby D L. Effect of squealer tip on rotor heat transfer and efficiency[J]. Journal of Turbomachinery, 1998, 120(4): 753-759.

[17] Gao J, Zheng Q, Li Y J, et al. Effect of axially non-uniform rotor tip clearance on aerodynamic performance of an unshrouded axial turbine[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2012, 226(2): 231-244.

[18] Yang D L, Feng Z P. Tip leakage flow and heat transfer predictions for turbine blades, ASME Paper, GT-2007-27728. New York: ASME, 2007.

[19] Hall M G. A new approach to vortex breakdown//Proceedings of the Heat Transfer and Fluid Mechanics Institute, 1967: 319-340.

[20] Denton J D. Loss mechanisms in turbomachines[J]. Journal of Turbomachinery, 1993, 115(4): 621-656.

Effect of Tip Leakage Vortex Breakdown on Losses in Turbines

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Zeyong YIN, Yancheng YOU, Chengxiang ZHU, Jianfeng ZHU, Liaoni WU, Yue HUANG. Multi-ducted twin-turbines ejector-ramjet/scramjet combined cycle engine for hypersonic civil vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 627181-627181.
[2]	Yating FENG, Hui ZHANG. Aerodynamic drag reduction device based on rear wind energy harvesting [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 180-191.
[3]	FAN Yongsheng, YANG Xiaoguang, SHI Duoqi, TAN Long, HUANG Weiqing. Rafting-waste judgement of serviced turbine blades: quantitative characterization and threshold determination [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625100-625100.
[4]	LIN Aqiang, LIU Gaowen, WU Heng, CHANG Ran, FENG Qing. Mechanism and theoretical analysis of pressure ratio and entropy increase in a pre-swirl system of gas turbine engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 125907-125907.
[5]	LIN Jing, ZHANG Boyao, ZHANG Dayi, CHEN Min. Research status and prospect of fault diagnosis for gas turbine aeroengine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 626565-626565.
[6]	LUO Jiaqi, FU Wenhao, ZENG Xian, XIA Zhiheng. Uncertainty impact of Reynolds number on flow losses of high-lift low-pressure turbine cascade [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 125427-125427.
[7]	LIN Peng, ZHUANG Fujian, QU Linfeng, XU Yangyang, SU Yadong. Technological development in hypersonic nozzle design, manufacture and validation: A review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526160-526160.
[8]	LI Dingjun, YANG Liuyu, SUN Fan, JIANG Peng, CHEN Yiwen, WANG Tiejun. Effect of preheating temperature on formation of surface cracks in thermal barrier coating system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526184-526184.
[9]	CHEN Keming, TIAN Ruozhou, GUO Sujuan, WANG Runzi, ZHANG Chengcheng, CHEN Haofeng, ZHANG Xiancheng, TU Shandong. Creep fatigue life prediction of aero-engine turbine disc under cyclic thermal load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225290-225290.
[10]	YAN Hao, WU Xiaoming. Topology optimization and structure evolution of turbine disks based on load sensitivity suppression [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225295-225295.
[11]	LI Dichen, LU Zhongliang, TIAN Xiaoyong, ZHANG Hang, YANG Chuncheng, CAO Yi, MIAO Kai. Additive manufacturing—Revolutionary technology for leading aerospace manufacturing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525387-525387.
[12]	JIA Yuchao, CHI Guanxin, ZHANG Kun, ZHANG Jia, WANG Zhenlong. High-efficiency electrical arc machining of integral shrouded blisk using grouped electrode [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525605-525605.
[13]	ZHANG Peiyu, ZHOU Xin, LI Yinghong. Progress on high energy beam repair of single crystal turbine blades [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525610-525610.
[14]	WANG Bin, WANG Haitao, WANG Yufeng, ZHANG Wenwu. Water-assisted laser scanning machining test of thermal barrier coating [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525353-525353.
[15]	YANG Tao, ZENG Yongbin, HANG Yusen, FANG Xiaolong. Inner-jet electrochemical cutting of mortise structure by tube electrode immersed in electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525588-525588.