[1] Yuan S F, Liang D K, Shi L H, et al. Recent progress on distributed structural health monitoring research at NUAA. Journal of Intelligent Material Systems and Structures, 2008, 19(3): 373-386.[2] Qing X L, Beard S J, Kumar A, et al. Advances in the development of built-in diagnostic system for filament wound composite structures. Composites Science and Technology, 2006, 66(11-12): 1694-1702.[3] Qiu L, Yuan S F. On development of a multi-channel PZT array scanning system and its evaluating application on UAV wing box. Sensors and Actuators A: Physical, 2009, 151(2): 220-230.[4] Xu Y D, Yuan S F, Peng G. Study on two-dimensional damage location in structure based on active Lamb wave detection technique. Acta Aeronautica et Astronautica Sinica, 2004, 25(5): 476-479. (in Chinese) 徐颖娣, 袁慎芳, 彭鸽. 二维结构损伤的主动Lamb波定位技术研究. 航空学报, 2004, 25(5): 476-479.[5] Yu L, Giurgiutiu V. In-situ optimized PWAS phased arrays for Lamb wave structural health monitoring. Journal of Mechanics of Materials and Structures, 2007, 2(3): 459-487.[6] Wang L, Yuan F G. Damage identification in a composite plate using prestack reverse-time migration technique. Structural Health Monitoring, 2005, 4(3): 195-211.[7] Leonard K R, Malyarenko E V, Hinders M K. Ultrasonic Lamb wave tomography. Inverse Problems, 2002, 18(6): 1795-1808.[8] Zhao X, Gao H, Zhang G, et al. Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. defect detection, localization and growth monitoring. Smart Materials and Structures, 2007, 16(4): 1208-1217.[9] Wang C H, Rose J T, Chang F G. A synthetic time-reversal imaging method for structural health monitoring. Smart Materials and Structures, 2004, 13(2): 415-423.[10] Wang Q, Yuan S F. Baseline-free imaging method based on new PZT sensor arrangements. Journal of Intelligent Material Systems and Structures, 2009, 20(14): 1663-1673.[11] Wilcox P, Lowe M, Cawley P. The effect of dispersion on long-range inspection using ultrasonic guided waves. NDT&E International, 2001, 34(1): 1-9.[12] Cai J, Shi L H, Yuan S F, et al. High spatial resolution imaging for structural health monitoring based on virtual time reversal. Smart Materials and Structures, 2011, 20(5): 055018-55028.[13] Liu L, Yuan F G. A linear mapping technique for dispersion removal of Lamb waves. Structural Health Monitoring, 2010, 9(1): 75-86.[14] Cai J, Shi L H, Yuan S F, et al. A virtual time reversal method based on broadband excitation. Chinese Journal of Scientific Instrument, 2011, 32(1): 218-224. (in Chinese) 蔡建, 石立华, 袁慎芳, 等. 一种基于宽带激励的虚拟时间反转方法. 仪器仪表学报, 2011, 32(1): 218-224.[15] Michaels J E. Detection, localization and characterization of damage in plates with an in situ array of spatially distributed ultrasonic sensors. Smart Materials and Structures, 2008, 17(3): 1-15.[16] Cai J, Shi L H, Yuan S F. Improved "delay-and-sum" imaging method for adjacent multi-damages. Journal of Vibration and Shock, 2011, 30(8): 67-71. (in Chinese) 蔡建, 石立华, 袁慎芳. 一种改进的近邻多损伤"移相叠加"成像方法. 振动与冲击, 2011, 30(8): 67-71. |