低空飞行器涡电混合推进系统综合热管理研究现状与关键技术

  • 柯湫莎 ,
  • 武志文 ,
  • 郭云涛 ,
  • 曹锋
展开
  • 1. 北京理工大学空天科学与技术学院
    2. 北京理工大学宇航学院
    3. 中国兵器装备研究院

收稿日期: 2026-06-30

  修回日期: 2026-10-10

  网络出版日期: 2026-10-13

Research status and key technologies of integrated thermal management for turbo-electric hybrid propulsion systems in low-altitude aircraft

  • KE Qiu-Sha ,
  • WU Zhi-Wen ,
  • GUO Yun-Tao ,
  • CAO Feng
Expand

Received date: 2026-06-30

  Revised date: 2026-10-10

  Online published: 2026-10-13

摘要

针对低空飞行器涡电混合推进系统多热源、多温区和多热沉并存导致的热管理复杂性,对其综合热管理研究现状和关键技术进行了综述。首先介绍典型系统构型和系统热流特征,分析燃气轮机、发电机、推进电机、电力电子装置和动力电池等关键部件的产热机理、热源分布及温度约束,并结合地面启动、起飞、悬停、爬升、巡航、下降和着陆等典型任务阶段,归纳了热负荷随任务剖面的变化规律。在此基础上,系统比较了空气冷却、液体冷却、相变材料与热管、直接油冷以及燃油/滑油热沉等常规热管理技术的散热能力、工程代价和适用条件,并结合代表性系统级方案对系统质量、比散热能力和功率代价等指标进行了定量分析。综合分析表明,空气冷却适合作为基础散热和终端排热方式,液体冷却具有较强的持续排热和温控能力,相变材料和热管主要用于缓解瞬时峰值热负荷及局部热点问题,直接油冷可强化电机、发电机和轴承等部位的近源散热,燃油和滑油热沉则有助于降低外部散热负担、冷却功耗和气动代价。因此,涡电混合推进系统热管理不宜依赖单一冷却方式,后续研究应面向完整任务剖面,重点发展系统级回路架构设计、动态热负荷建模、局部近源强化散热、机载热沉协同利用和热管理与能量管理协同控制技术,为低空飞行器轻量化、高可靠性和高适应性热管理系统设计提供支撑。

本文引用格式

柯湫莎 , 武志文 , 郭云涛 , 曹锋 . 低空飞行器涡电混合推进系统综合热管理研究现状与关键技术[J]. 航空学报, 0 : 1 -0 . DOI: 10.7527/S1000-6893.2026.34187

Abstract

Turbo-electric hybrid propulsion systems for low-altitude aircraft integrate multiple heat sources, thermal zones, and heat sinks, which makes thermal management highly complex. This paper reviews recent advances and key technologies in integrated thermal management for such systems. Typical system configurations and system-level heat-flow characteristics are first introduced. The heat-generation mechanisms, heat-source distributions, and temperature constraints of key components, including gas turbines, generators, propulsion motors, power electronic devices, and propulsion batteries, are then analyzed. Variations in thermal load across typical mission phases, such as ground start-up, take-off, hover, climb, cruise, descent, and landing, are summarized. On this basis, conventional thermal management technologies, including air cooling, liquid cooling, phase-change materials and heat pipes, direct oil cooling, and the use of fuel and lubricating oil as heat sinks, are systematically compared in terms of heat-dissipation capability, engineering penalties, and applicable operating conditions. Representative system-level thermal management schemes are further compared quantitatively in terms of system mass, heat-dissipation capacity per unit mass, and power penalty. The analysis indicates that air cooling is well suited to baseline cooling and final heat rejection, whereas liquid cooling offers high-capacity, continuous heat rejection and temperature regulation. Phase-change materials and heat pipes mainly serve to buffer transient peak thermal loads and localized hot spots. Direct oil cooling enhances near-source heat removal from motors, generators, bearings, and other components, while fuel and lubricating oil used as heat sinks can reduce external heat-rejection requirements, cooling power consumption, and aerodynamic penalties. Thermal management of turbo-electric hybrid propulsion systems should therefore not rely on a single cooling approach. Future work should cover the entire mission profile and focus on system-level cooling-loop architecture design, dynamic thermal-load modeling, localized near-source cooling enhancement, coordinated utilization of onboard heat sinks, and integrated control of thermal and energy management. These developments will support the design of lightweight, highly reliable, and adaptable thermal management systems for low-altitude aircraft.

参考文献

[1]新华社.李强在政府工作报告中提出, 大力推进现代化产业体系建设, 加快发展新质生产力[EB/OL]. 北京: 中国政府网, 2024. (2024-03-05) [2026-06-28]. https://www.gov.cn/yaowen/liebiao/202403/content_6936331.htm. [2]XINHUA NEWS AGENCY.Li Qiang proposes in the government work report to vigorously promote the construction of a modern industrial system and accelerate the development of new quality productive forces[EB/OL]. Beijing: Chinese Government Website, 2024. (2024-03-05) [2026-06-28]. https://www.gov.cn/yaowen/liebiao/202403/content_6936331.htm (in Chinese). [3] 国务院, 中央军委.无人驾驶航空器飞行管理暂行条例[EB/OL]. 北京: 中国政府网, 2023. (2023-06-28) [2026-06-28]. https://www.gov.cn/zhengce/content/202306/content_6888799.htm. [4]STATE COUNCIL OF THE PEOPLE' S REPUBLIC OF CHINA, CENTRAL MILITARY COMMISSION OF THE PEOPLE' S REPUBLIC OF CHINA.Interim regulations on the administration of unmanned aircraft flights[EB/OL]. Beijing: Chinese Government Website, 2023. (2023-06-28) [2026-06-28]. https://www.gov.cn/zhengce/content/202306/content_6888799.htm (in Chinese). [5]Federal Aviation Administration.Integration of powered-lift: pilot certification and operations; miscellaneous amendments related to rotorcraft and airplanes: final rule[EB/OL]. Washington, D.C.: Federal Register, 2024. (2024-11-21) [2026-06-28]. https://www.federalregister.gov/documents/2024/11/21/2024-24886/integration-of-powered-lift-pilot-certification-and-operations-miscellaneous-amendments-related-to. [6]European Union Aviation Safety Agency.Special condition for VTOL and means of compliance[EB/OL]. Cologne: European Union Aviation Safety Agency, 2025. (2025-07-18) [2026-06-27]. https://www.easa.europa.eu/en/document-library/product-certification-consultations/special-condition-vtol. [7]EHang.EHang successfully obtains type certificate for EH216-S passenger-carrying UAV system issued by Civil Aviation Administration of China[EB/OL]. Guangzhou: EHang, 2023. (2023-10-13) [2026-06-28]. https://www.ehang.com/news/990.html. [8]Joby Aviation.Technology[EB/OL]. Santa Cruz: Joby Aviation, 2026 [2026-06-28]. https://www.jobyaviation.com/technology. [9]Archer Aviation.Midnight aircraft[EB/OL]. San Jose: Archer Aviation, 2026 [2026-06-28]. https://www.archer.com/aircraft. [10]魏宽, 李亚忠, 苗辉, 等.油电混合动力推进系统热管理技术发展[J]. 航空动力, 2023(4): 42-45. [11]WEI K, LI Y Z, MIAO H, et al.Thermal management technology of fuel-electric hybrid propulsion system[J]. Aerospace Power, 2023(4): 42-45 (in Chinese). [12]SRIPAD S, BILLS A, VISWANATHAN V.A review of safety considerations for batteries in aircraft with electric propulsion[J].MRS Bulletin, 2021, 46(5):435-442 [13]BRELJE B J, MARTINS J R R A.Electric, hybrid, and turboelectric fixed-wing aircraft: A review of concepts, models, and design approaches[J]. Progress in Aerospace Sciences, 2019, 104: 1-19. [14]ALRASHED M, NIKOLAIDIS T, PILIDIS P, et al.Utilisation of turboelectric distribution propulsion in commercial aviation: A review on NASA’s TeDP concept[J].Chinese Journal of Aeronautics, 2021, 34(11):48-65 [15]THONEMANN N, PIERRAT E, DUDKA K M, et al.Towards sustainable regional aviation: Environmental potential of hybrid-electric aircraft and alternative fuels[J]. Sustainable Production and Consumption, 2024, 45: 371-385. [16]JADU-GYAMFI B A, GOOD C.Electric aviation: A review of concepts and enabling technologies[J]. Transportation Engineering, 2022, 9: 100134. [17]COUTINHO M, BENTO D, SOUZA A, et al.A review on the recent developments in thermal management systems for hybrid-electric aircraft[J]. Applied Thermal Engineering, 2023, 227: 120427. [18]帅石金, 马骁, 张晓卿, 等.低空飞行器混电动力系统关键技术研究进展与展望[J].推进技术, 2025, 46(11):37-58 [19]SHUAI S J, MA X, ZHANG X Q, et al.Advances and challenges in hybrid-electric propulsion technologies for low-altitude aerial vehicles[J].Journal of Propulsion Technology, 2025, 46(11):37-58 [20]XIE Y, SAVVARIS A, TSOURDOS A, et al.Review of hybrid electric powered aircraft,its conceptual design and energy management methodologies[J].Chinese Journal of Aeronautics, 2021, 34(4):432-450 [21]National Academies of Sciences, Engineering, and Medicine.Commercial aircraft propulsion and energy systems research: Reducing global carbon emissions[M]. Washington, D.C.: National Academies Press, 2016. [22]冯诗愚, 付子祺, 刘冠男, 等.增程式飞机发展现状与展望[J/OL]. 北京航空航天大学学报: 1-12 [2026-06-28]. https://doi.org/10.13700/j.bh.1001-5965.2025.0363. [23]FENG S Y, FU Z Q, LIU G N, et al.Development status and prospect of range-extended aircraft[J/OL]. Journal of Beijing University of Aeronautics and Astronautics: 1-12 [2026-06-28]. https://doi.org/10.13700/j.bh.1001-5965.2025.0363 (in Chinese). [24]刘海港, 刘亮, 王鹏, 等.基于模型的多电飞机能源优化特性仿真分析[J].航空学报, 2021, 42(8):525801-525801 [25]LIU H G, LIU L, WANG P, et al.Model based simulation and analysis of energy optimization characteristics of more-electric aircraft[J].Acta Aeronautica et Astronautica Sinica, 2021, 42(8):525801-525801 [26]雷涛, 孔德林, 王润龙, 等.分布式电推进飞机动力系统评估优化方法[J].航空学报, 2021, 42(6):624047-624047 [27]LEI T, KONG D L, WANG R L, et al.Evaluation and optimization method for power systems of distributed electric propulsion aircraft[J].Acta Aeronautica et Astronautica Sinica, 2021, 42(6):624047-624047 [28]BERNARDI D, PAWLIKOWSKI E, NEWMAN J.A general energy balance for battery systems[J].Journal of The Electrochemical Society, 1985, 132(1):5-12 [29]RAO L, NEWMAN J.Heat-generation rate and general energy balance for insertion battery systems[J].Journal of The Electrochemical Society, 1997, 144(8):2697-2704 [30]THOMAS K E, NEWMAN J.Thermal modeling of porous insertion electrodes[J].Journal of The Electrochemical Society, 2003, 150(2):A176-A192 [31]W?CKINGER J, HACKER V, GABER C.Dimensioning of a permanent magnet synchronous machine for electric vehicles according to performance and integration requirements[J]. Automotive and Engine Technology, 2021, 6: 47-59. [32]ZHANG Y, WANG Y, LI X, et al.Heat dissipation characteristics of IGBT module based on flow-solid coupling[J].Micromachines, 2022, 13(4):554- [33]EKICI S, SOHRET Y, COBAN K, et al.Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications[J]. Energy, 2016, 115: 914-923. [34]孙三亚, 邵壮, 周洲, 等.面向的分布式动力能源系统高精度建模与仿真[J].航空学报, 2025, 46(15):131513- [35]SUN S Y, SHAO Z, ZHOU Z, et al.High-precision modeling and simulation of distributed propulsion energy systems for eVTOLeSTOL[J].Acta Aeronautica et Astronautica Sinica, 2025, 46(15):131513- [36]何程, 童玉奇, 夏兴禄, 等.面向货运任务的混电垂直起降无人机能量管理策略和任务路径综合优化[J].航空学报, 2024, 45(14):229606- [37]HE C, TONG Y Q, XIA X L, et al.Integrated optimization of energy management strategy and mission path for hybrid-electric vertical take-off and landing UAVs in cargo missions[J].Acta Aeronautica et Astronautica Sinica, 2024, 45(14):229606- [38]KASITZ J, LAD A A, HOQUE M J, et al.Transient nature of flight and its impact on thermal management for all electric aircraft[J].Journal of Electronic Packaging, 2023, 145(1):011101- [39]伏宇, 刘昭威, 郑天慧, 等.航空燃气涡轮-电混合动力系统关键技术分析[J].推进技术, 2024, 45(3):78-88 [40]FU Y, LIU Z W, ZHENG T H, et al.Analysis of key technologies of aviation gas turbine-electric hybrid power systems[J].Journal of Propulsion Technology, 2024, 45(3):78-88 [41]PARK J, JEONG T, YEE K.Refined air-cooled battery sizing process for conceptual design of eVTOL aircraft[J]. Applied Energy, 2025, 377: 124567. [42]CHEN K, SONG M, WEI W, et al.Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement[J]. Energy, 2018, 145: 603-613. [43]ZHANG X, FAN X, DENG Y.Cooling performance optimization of air-cooled battery thermal management system with L-type flow[J].Energy Technology, 2023, 11(9):2300382- [44]JUNAID F P, RAKSHIT D, SAHA B B.Converging passage: A strategy for uniform cell cooling in air-cooled battery thermal management system[J]. Thermal Science and Engineering Progress, 2025, 61: 103559. [45]PADALKAR A B, CHAUDHARI M B, KORE K B, et al.Effects of circumferential fin on cooling performance improvement of forced air-cooled battery pack[J]. Applied Thermal Engineering, 2024, 238: 122013. [46]HU X, QIAN Y, YANG B, et al.Aerodynamic design of cooling guide for electrical machine in electric ducted fan[J].Journal of Engineering for Gas Turbines and Power, 2023, 145(5):051009- [47]LE W, LIN M, LIN K, et al.A rotor cooling enhanced method for axial flux permanent magnet synchronous machine with housing-cooling[J].IEEE Transactions on Applied Superconductivity, 2021, 31(8):1-5 [48]LI W, CAO Z, ZHANG X.Thermal analysis of the solid rotor permanent magnet synchronous motors with air-cooled hybrid ventilation systems[J].IEEE Transactions on Industrial Electronics, 2022, 69(2):1146-1156 [49]MELKA B, SMO?KA J, HETMA?CZYK J, et al.Numerical and experimental analysis of heat dissipation intensification from electric motor[J]. Energy, 2019, 182: 269-279. [50]王维龙, 向立平, 赵光攀.IGBT功率模块冷却系统应用综述[J]. 机车电传动, 2022(6): 130-137. [51]WANG W L, XIANG L P, ZHAO G P.Review of applications of cooling systems for IGBT power modules[J]. Electric Drive for Locomotives, 2022(6): 130-137 (in Chinese). [52]REHMAN T, PARK C W.Progress in insulated gate bipolar transistor thermal management: From fundamentals to advanced strategies[J]. Renewable and Sustainable Energy Reviews, 2025, 210: 115219. [53]YAMAGUCHI K, KATSURA K, YAMADA T, et al.High power density SiC-based inverter with a power density of 70 kWliter or 50 kWkg[J].IEEJ Journal of Industry Applications, 2019, 8(4):694-703 [54]MARCZOK C, ARNHOLD K.Power electronics for eVTOLs[EB/OL]. Berlin: Fraunhofer IZM, 2025. (2025-02-20) [2026-06-27]. https://blog.izm.fraunhofer.de/power-electronics-for-evtols/. [55]江金涛, 董素艳, 董荣晓, 等.某发动机涡轮导向器叶片冷却结构优化设计及实验[J].航空动力学报, 2026, 41(3):20240833- [56]JIANG J T, DONG S Y, DONG R X, et al.Optimization design and experimental study of cooling structure of a turbine guide vane of an engine[J].Journal of Aerospace Power, 2026, 41(3):20240833- [57]WU W, YAO R, WANG J, et al.Leading edge impingement cooling analysis with separators of a real gas turbine blade[J]. Applied Thermal Engineering, 2022, 208: 118275. [58]KHALIL M, MOHAMED S A, ATTALLA M, et al.Cooling of gas turbine blade leading edge via an array of air jets with variable diameters[J].Journal of Heat Transfer, 2022, 144(12):123801- [59]李世涵, 白波, 程国强, 等.流向微肋气膜冷却布局对涡轮动叶凹槽状叶顶传热冷却性能的影响[J/OL]. 发电技术, 2026, 47(1) [2026-06-27]. https://doi.org/10.12096/j.2096-4528.pgt.260113. [60]LI S H, BAI B, CHENG G Q, et al.Effects of streamwise micro-rib film cooling layout on heat transfer and cooling performance of the grooved tip of a turbine rotor blade[J/OL]. Power Generation Technology, 2026, 47(1) [2026-06-27]. https://doi.org/10.12096/j.2096-4528.pgt.260113 (in Chinese). [61]HAN F, BI S, MAO J K, et al.Film cooling effectiveness of a leading-edge cooling array of a rotating turbine blade with twist[J]. Applied Thermal Engineering, 2023, 225: 120175. [62]黄海, 张昊, 白波, 等.燃气和燃氢涡轮叶栅端壁传热和气膜冷却特性[J].热力透平, 2026, 55(1):1-9 [63]HUANG H, ZHANG H, BAI B, et al.Heat transfer and film cooling characteristics of turbine cascade endwalls under gas and hydrogen combustion conditions[J].Thermal Turbine, 2026, 55(1):1-9 [64]阮有钢, 丰镇平.气膜冷却气热耦合伴随优化方法研究[J/OL]. 推进技术, 2026 [2026-06-27]. https://doi.org/10.3724/1001-4055.202512006. [65]RUAN Y G, FENG Z P.Study on an adjoint optimization method for aerothermal coupling of film cooling[J/OL]. Journal of Propulsion Technology, 2026 [2026-06-27]. https://doi.org/10.3724/1001-4055.202512006 (in Chinese). [66]KANG S, SAIAS C, ROUMELIOTIS I, et al.On the design of integrated thermal management systems for eVTOL aircraft[C]// ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. New York: ASME, 2023: GT2023-103097. [67]WANG S, WANG H, FENG Y, et al.Propeller slipstream driven air-liquid hybrid cooling system for electric aircraft power cabin thermal management[J]. Applied Thermal Engineering, 2025, 280: 128457. [68]陈溢群, 巫江虹, 杨槐宇.应用于未来城市空中交通的飞行汽车热管理系统研究[J].制冷学报, 2025, 46(3):67-74 [69]CHEN Y Q, WU J H, YANG H Y.Research on thermal management systems of eVTOL flying cars for future urban air mobility[J].Journal of Refrigeration, 2025, 46(3):67-74 [70]LIU L, ZHANG X L, LIN X W.Recent developments of thermal management strategies for lithium-ion batteries: A state-of-the-art review[J].Energy Technology, 2022, 10(6):2101135- [71]LIU J W, LI H, LI W Y, et al.Thermal characteristics of power battery pack with liquid-based thermal management[J]. Applied Thermal Engineering, 2020, 164: 114421. [72]QIAN Z, LI Y, RAO Z.Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling[J]. Energy Conversion and Management, 2016, 126: 622-631. [73]ZHAO D, LEI Z G, AN C.Research on battery thermal management system based on liquid cooling plate with honeycomb-like flow channel[J]. Applied Thermal Engineering, 2023, 218: 119324. [74]LIU F, CHEN Y, QIN W, et al.Optimal design of liquid cooling structure with bionic leaf vein branch channel for power battery[J]. Applied Thermal Engineering, 2023, 218: 119283. [75]ZHAO C, CLARKE M, KELLERMANN H, et al.Liquid cooling systems for batteries of electric vertical takeoff and landing aircraft[J].Journal of Aircraft, 2024, 61(3):667-683 [76]FASQUELLE A, LALOY D.Water cold plates cooling in a permanent magnet synchronous motor[J].IEEE Transactions on Industry Applications, 2017, 53(5):4406-4413 [77]ZHANG C, CHEN L, WANG X, et al.Loss calculation and thermal analysis for high-speed permanent magnet synchronous machines[J]. IEEE Access, 2020, 8: 92627-92636. [78]朱高嘉, 朱英浩, 佟文明, 等.基于流固耦合的高速永磁电机冷却结构分析与改进[J].电工电能新技术, 2017, 36(12):1-7 [79]ZHU G J, ZHU Y H, TONG W M, et al.Analysis and improvement of cooling structure for high-speed permanent magnet motors based on fluid-solid coupling[J].Advanced Technology of Electrical Engineering and Energy, 2017, 36(12):1-7 [80]HE Q, WANG H, LI Q.Design optimization and performance analysis of high torque density and efficiency motors for eVTOL applications[J]. IEEE Access, 2025, 13: 78403-78415. [81]张卓然, 张健, 胡光源, 等.多电飞机高功率密度高效电机系统热管理技术[J].航空学报, 2025, 46(6):531380- [82]ZHANG Z R, ZHANG J, HU G Y, et al.Thermal management technologies of high-power-density and high-efficiency motor systems in more electric aircraft[J].Acta Aeronautica et Astronautica Sinica, 2025, 46(6):531380- [83]黄维康, 张卓然, 达兴亚, 等.高速对转涵道风扇双驱动电机的热特性[J].航空学报, 2024, 45(8):129048- [84]HUANG W K, ZHANG Z R, DA X Y, et al.Thermal characteristics of dual-drive motors for a high-speed contra-rotating ducted fan[J].Acta Aeronautica et Astronautica Sinica, 2024, 45(8):129048- [85]杨雨薇, 齐文亮, 张杰.机载电子设备液冷技术应用研究进展[J].机械研究与应用, 2024, 37(3):163-165 [86]YANG Y W, QI W L, ZHANG J.Research progress on application of liquid cooling technology for airborne electronic equipment[J].Mechanical Research & Application, 2024, 37(3):163-165 [87]ORVILLE T, TAJWAR M, BIHANI R, et al.Enhancing thermal efficiency in power electronics: A review of advanced materials and cooling methods[J].Thermo, 2025, 5(3):30- [88]窦新.高功率密度IGBT模块液冷板流动传热分析及冷却策略研究[D]. 杭州: 浙江大学, 2023. [89]DOU X.Flow and heat transfer analysis and cooling strategy of liquid cooling plates for high-power-density IGBT modules[D]. Hangzhou: Zhejiang University, 2023 (in Chinese). [90]李健, 蒋宏邦, 王辉, 等.某微通道液冷板的性能分析与优化[J]. 机械设计与制造, 2023(3): 129-133. [91]LI J, JIANG H B, WANG H, et al.Performance analysis and optimization of a microchannel liquid cooling plate[J]. Machinery Design & Manufacture, 2023(3): 129-133 (in Chinese). [92]CHEN C, ZHAO H, LIU C, et al.Transient heat transfer characteristics in a flat plate heat sink with mini-channels for cooling high heat flux IGBT[J].Micromachines, 2022, 13(9):1417- [93]KI S, LEE J, RYU S, et al.A bio-inspired, low pressure drop liquid cooling system for high-power IGBT modules for EV/HEV applications[J]. International Journal of Thermal Sciences, 2021, 161: 106708. [94]ZHANG X, ZHAO X, LI W, et al.Ultra-thermostable embedded liquid cooling in SiC 3D packaging power modules of electric vehicles[J]. Energy Conversion and Management, 2023, 276: 116499. [95]LI S, YU J, XIAO W, et al.Thermal management for batteries and motors in a liquid hydrogen-fueled hybrid propulsion system[J]. Applied Thermal Engineering, 2025, 281: 128519. [96]LUO J, ZOU D, WANG Y, et al.Battery thermal management systems based on phase change material: A comprehensive review[J]. Chemical Engineering Journal, 2022, 430: 132741. [97]HUSSAIN A, ABIDI I H, TSO C Y, et al.Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials[J]. International Journal of Thermal Sciences, 2018, 124: 23-35. [98]ZOU D, MA X, LIU X, et al.Thermal performance enhancement of composite phase change materials using graphene and carbon nanotubes as additives for lithium-ion power battery[J]. International Journal of Heat and Mass Transfer, 2018, 120: 33-41. [99]LI Y, ZHOU Z, HU Y, et al.Evaluation of lithium battery thermal management using sealant made of boron nitride and silicone[J]. Applied Thermal Engineering, 2020, 179: 115717. [100]WANG F, CAO J, LING Z, et al.Experimental and simulative investigations on a phase change material nano-emulsion-based liquid cooling thermal management system for a lithium-ion battery pack[J]. Energy, 2020, 207: 118228. [101]TRAN T H, HARMAND S, SAHUT B.Experimental investigation on heat pipe cooling for hybrid electric vehicle battery module[J].Journal of Heat Transfer, 2014, 136(9):091401- [102]WANG L C, ZHAO Y H, QUAN Z H, et al.Investigation of thermal management of lithium-ion battery based on micro heat pipe array[J]. Journal of Energy Storage, 2021, 39: 102624. [103]RAO Z, WANG Q, HUANG C.Investigation of the thermal performance of extensive power battery thermal management system based on oscillating heat pipe[J]. Journal of Power Sources, 2016, 329: 366-373. [104]WU H, NIU M, SHAO Y, et al.Investigations of Li-Ion battery thermal management systems based on heat pipes: A review[J]. ACS Omega, 2024, 9: 97-116. [105]LIU X, SHI Y, CHU J, et al.A new phase-change cooling method for the frequent start-stop electric motor[J]. Applied Thermal Engineering, 2021, 198: 117504. [106]WANG S, LI Y, LI Y Z, et al.Transient cooling effect analyses for a permanent-magnet synchronous motor with phase-change-material packaging[J]. Applied Thermal Engineering, 2016, 109: 251-260. [107]LI B, YUAN Y, GAO P, et al.Cooling structure design for an outer-rotor permanent magnet motor based on phase change material[J]. Thermal Science and Engineering Progress, 2022, 34: 101406. [108]YU Z, LI Y, JING Y, et al.Cooling system of outer rotor SPMSM for a two-seater all-electric aircraft based on heat pipe technology[J].IEEE Transactions on Transportation Electrification, 2022, 8(2):1656-1664 [109]ZHANG C, ZHANG X, ZHAO F, et al.Improvements on permanent magnet synchronous motor by integrating heat pipes into windings for solar unmanned aerial vehicle[J].Green Energy and Intelligent Transportation, 2022, 1(1):100011- [110]DONG C, HU X, QIAN Y, et al.Thermal management integrated with flat heat pipes for in-slot stator windings of electric motors[J].IEEE Transactions on Industry Applications, 2023, 59(1):699-711 [111]XUE H, ZHANG Z, LIU Y, et al.Analysis of lightweight dual-rotor yokeless-stator PMSM for electrified aircraft propulsion considering thermal benefits of heat pipes[J]. IEEE Transactions on Transportation Electrification, 2025, 11: 11030-11040. [112]BIANCO V, DE ROSA M, VAFAI K.Phase-change materials for thermal management of electronic devices[J]. Applied Thermal Engineering, 2022, 214: 118839. [113]高学农, 刘欣, 孙滔, 等.基于复合相变材料的电子芯片热管理性能研究[J].高校化学工程学报, 2013, 27(2):187-192 [114]GAO X N, LIU X, SUN T, et al.Thermal management performance of electronic chips based on composite phase change materials[J].Journal of Chemical Engineering of Chinese Universities, 2013, 27(2):187-192 [115]吴延鹏, 刘乾隆, 田东民, 等.相变材料与热管耦合的电子器件热管理研究进展[J].化工学报, 2023, 74(7):2843-2864 [116]WU Y P, LIU Q L, TIAN D M, et al.Research progress in thermal management of electronic devices coupled with phase change materials and heat pipes[J].CIESC Journal, 2023, 74(7):2843-2864 [117]BELGUITH M, ELOUED S, KADI M, et al.A review of thermal management techniques adopted for high-power-density GaN-based converters[J].Chips, 2026, 5(1):4- [118]BROSSARDT N, HOELLE S, ZIGAN L.An experimental investigation of oil spray cooling heat transfer for electrical machine cooling[J]. Experimental Thermal and Fluid Science, 2026, 172: 111656. [119]CHEN P, BEN HASSINE N, OUENZERFI S, et al.Experimental and numerical study of stator end-winding cooling with impinging oil jet[J]. Applied Thermal Engineering, 2023, 220: 119702. [120]朱益琛, 孙宇薇, 刘思华, 等.基于多相流模型的油冷电机内部流动及散热特性研究[J].汽车工程, 2025, 47(9):1803-1813 [121]ZHU Y C, SUN Y W, LIU S H, et al.Internal flow and heat dissipation characteristics of oil-cooled motors based on a multiphase flow model[J].Automotive Engineering, 2025, 47(9):1803-1813 [122]ADENIYI A A, MORVAN H, SIMMONS K.A computational fluid dynamics simulation of oil-air flow between the cage and inner race of an aero-engine bearing[J].Journal of Engineering for Gas Turbines and Power, 2017, 139(1):012506- [123]CHANDRA B, COLLICOTT S H, MUNSON J H.Scavenge flow in a bearing chamber with tangential sump off-take[J].Journal of Engineering for Gas Turbines and Power, 2013, 135(3):032503- [124]EASTWICK C N, SIMMONS K, WANG Y, et al.Study of aero-engine oil-air separators[J].Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2006, 220(7):707-717 [125]WILLENBORG K, KLINGSPORN M, TEBBY S, et al.Experimental analysis of airoil separator performance[J].Journal of Engineering for Gas Turbines and Power, 2008, 130(6):062503- [126]LI G, ZHANG Q, LEI Z, et al.Leakage performance of labyrinth seal for oil sealing of aero-engine[J].Propulsion and Power Research, 2019, 8(1):13-22 [127]王瀚升, 李育隆, 徐诗杰, 等.基于流热固耦合的航空发动机涡轮导叶流动换热[J].航空动力学报, 2025, 40(11):20240464- [128]WANG H S, LI Y L, XU S J, et al.Study on flow and heat transfer of aero-engine turbine guide vanes based on fluid-thermal-solid coupling[J].Journal of Aerospace Power, 2025, 40(11):20240464- [129]HITZIGRATH R.Improving aircraft fuel-thermal management: SAE Technical Paper 932086[R]. Warrendale: SAE International, 1993. [130]KELLERMANN H, HABERMANN A L, VRATNY P C, et al.Assessment of fuel as alternative heat sink for future aircraft[J]. Applied Thermal Engineering, 2020, 170: 114985. [131]李海旺, 高胜寒, 谢刚, 等.氢能混动分布式热管理系统多热沉匹配与调控策略[J].航空学报, 2025, 46(9):630951- [132]LI H W, GAO S H, XIE G, et al.Multi-heat-sink matching and regulation strategy for distributed thermal management systems of hydrogen-energy hybrid power[J].Acta Aeronautica et Astronautica Sinica, 2025, 46(9):630951- [133]叶一琳, 柳山林, 刘丽平, 等.氢燃料航空发动机热管理研究综述[J].推进技术, 2025, 46(11):85-97 [134]YE Y L, LIU S L, LIU L P, et al.Review of thermal management of hydrogen-fueled aero-engines[J].Journal of Propulsion Technology, 2025, 46(11):85-97 [135]贺振宗, 李想, 毛军逵, 等.考虑余热梯级利用的燃料电池涡轮发动机混合动力热管理系统多目标优化研究[J].推进技术, 2025, 46(11):270-284 [136]HE Z Z, LI X, MAO J K, et al.Multi-objective optimization of a fuel-cellturbine-engine hybrid thermal management system considering cascade utilization of waste heat[J].Journal of Propulsion Technology, 2025, 46(11):270-284 [137]ASLI M, K?NIG P, SHARMA D, et al.Thermal management challenges in hybrid-electric propulsion aircraft[J]. Progress in Aerospace Sciences, 2024, 144: 100967. [138]DONATEO T, DE PASCALIS C L, STRAFELLA L, et al.Off-line and on-line optimization of the energy management strategy in a hybrid electric helicopter for urban air-mobility[J]. Aerospace Science and Technology, 2021, 113: 106677.
Options
文章导航

/

〈 〉