增材制造——面向航空航天制造的变革性技术

李涤尘; 鲁中良; 田小永; 张航; 杨春成; 曹毅; 苗恺

doi:10.7527/S1000-6893.2021.25387

航空学报 >

2022 , Vol. 43 >Issue 4: 525387 - 525387

DOI: https://doi.org/10.7527/S1000-6893.2021.25387

综述

增材制造——面向航空航天制造的变革性技术

李涤尘 ,
鲁中良 ,
田小永 ,
张航 ,
杨春成 ,
曹毅 ,
苗恺

展开

1. 西安交通大学机械制造系统工程国家重点实验室, 西安 710054;
2. 西安交通大学陕西省快速成形制造技术工程研究中心, 西安 710049

收稿日期: 2021-02-05

修回日期: 2021-03-01

网络出版日期: 2021-04-29

基金资助

国家科技重大专项（2017-VII-0008-0101）

收起

Additive manufacturing—Revolutionary technology for leading aerospace manufacturing

LI Dichen ,
LU Zhongliang ,
TIAN Xiaoyong ,
ZHANG Hang ,
YANG Chuncheng ,
CAO Yi ,
MIAO Kai

Expand

1. State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710054, China;
2. Shaanxi Rapid Prototyping Manufacturing Engineering Research Center, Xi'an Jiaotong University, Xi'an 710049, China

Received date: 2021-02-05

Revised date: 2021-03-01

Online published: 2021-04-29

Supported by

National Science and Technology Major Project (2017-VII-0008-0101)

Fold

摘要

增材制造技术在航空航天应用方面具有单件小批量的复杂结构快速制造优势，未来将向着设计、材料和成形一体化方向发展。分析了增材制造在航空航天领域应用发展的3个层面，以航空发动机涡轮叶片增材制造、高性能聚醚醚酮（PEEK）及其复合材料、连续纤维增强树脂复合材料及太空3D打印为主题，介绍了增材制造技术国内外以及西安交通大学的研究状况。涡轮叶片应用增材制造工艺可以有效提高效率降低成本，未来向高性能的高温合金和陶瓷基复合材料增材制造技术发展。高性能轻质聚合物PEEK及其复合材料增材制造在高力学性能结构件、吸波功能件的成形中得到应用，将改变现有的设计与材料，推动结构与功能一体化发展。连续纤维复合材料增材制造将带动无模具纤维复合材料成形的新发展，在太空3D打印将改变未来航空航天制造模式。增材制造技术将给航空航天制造技术带来变革性发展。

关键词： 增材制造; 航空航天; 涡轮叶片; 复合材料; 吸波结构; 太空3D打印

本文引用格式

李涤尘 , 鲁中良 , 田小永 , 张航 , 杨春成 , 曹毅 , 苗恺 . 增材制造——面向航空航天制造的变革性技术[J]. 航空学报, 2022 , 43(4) : 525387 -525387 . DOI: 10.7527/S1000-6893.2021.25387

Abstract

The additive manufacturing technology has the advantage of rapid manufacturing of single-piece and small-batch complex structures used in aerospace applications, and integration of design, materials and manufacturing will be the direction for its future development. This paper analyzes three aspects of application and development of additive manufacturing in the field of aerospace, focusing on the manufacturing of aero-engine turbine blades, high-performance Poly-Ether-Ether-Ketone (PEEK) and its composites, continuous fiber reinforced resin composites, and space 3D printing. The research status of additive manufacturing technology at home and abroad and in Xi'an Jiaotong University is also introduced. The application of additive manufacturing technology for turbine blades can effectively improve the manufacturing efficiency and reduce costs. In the future, this technology can meet the manufacturing of high-performance superalloy and ceramic matrix composite blades. The additive manufacturing of high-performance lightweight polymer PEEK and its composites are applied in forming of structure parts with high mechanical properties and radio absorbing functional parts, which will change the existing design and materials and promote the integrated development of structure and function. The additive manufacturing of continuous fiber reinforced resin composites will drive the new development of forming of moldless fiber composites, and 3D printing in space will change the aerospace manufacturing model in the future. The additive manufacturing technology will revolutionize the aerospace manufacturing technology.

Key words： additive manufacturing; aerospace; turbine blade; composite material; radio absorption structure; 3D printing in space

参考文献

[1] POLLOCK T M. Alloy design for aircraft engines[J]. Nature Materials, 2016, 15(8):809-815.
[2] 张立同, 曹腊梅, 刘国利. 近净形熔模精密铸造理论与实践[M]. 北京:国防工业出版社, 2007. ZHANG L T, CAO L M, LIU G L. Theory and practice of near net-shape investment casting[M]. Beijing:National Defense Industry Press, 2007(in Chinese).
[3] BAE C J, KIM D, HALLORAN J W. Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing[J]. Journal of the European Ceramic Society, 2019, 39(2-3):618-623.
[4] WU H H, LI D C, GUO N N. Fabrication of integral ceramic mold for investment casting of hollow turbine blade based on stereolithography[J]. Rapid Prototyping Journal, 2009, 15(4):232-237.
[5] MIAO K, LU Z L, CAO J W, et al. Effect of polydimethylsiloxane on the mid-temperature strength of gelcast Al₂O₃ ceramic parts[J]. Materials & Design, 2016, 89:810-814.
[6] XU W L, LU Z L, TIAN G Q, et al. Fabrication of single-crystal superalloy hollow blade based on integral ceramic mold[J]. Journal of Materials Processing Technology, 2019, 271:615-622.
[7] BRIF Y, THOMAS M, TODD I. The use of high-entropy alloys in additive manufacturing[J]. Scripta Materialia, 2015, 99:93-96.
[8] HAASE C, TANG F, WILMS M B, et al. Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys-Towards rapid alloy screening and design[J]. Materials Science & Engineering A, 2017, 688:180-189.
[9] ZHU Z G, NGUYEN Q B, NG F L, et al. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting[J]. Scripta Materialia, 2018, 154:20-24.
[10] 李青宇,张航,李涤尘,等. 激光增材制造WNbMoTa高性能高熵合金[J]. 机械工程学报,2019, 55(15):10-16. LI Q Y, ZHANG H, LI D C, et al. Manufacture of WNbMoTa high performance high-entropy alloy by laser additive manufacturing[J]. Journal of Mechanical Engineering, 2019, 55(15):10-16(in Chinese).
[11] ZHANG H, ZHAO Y Z, CAI J L, et al. High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing[J]. Materials & Design, 2021, 201(5):109462.
[12] PADTURE N P. Advanced structural ceramics in aerospace propulsion[J]. Nature Materials, 2016, 15(8):804.
[13] LU Z L, CAO J W, SONG Z Q, et al. Research progress of ceramic matrix composite parts based on additive manufacturing technology[J]. Virtual and Physical Prototyping, 2019, 14(4):333-348.
[14] CAO J W, LU Z L, MIAO K,et al. Investigation on microstructure control of in-situ synthesized high-performance Cf/SiC composites[J]. Journal of Alloys and Compounds, 2019, 805(C):303-308.
[15] CAO J W, LU Z L, MIAO K, et al. Fabrication of high-strength porous SiC-based composites with unidirectional channels[J]. Journal of the American Ceramic Society, 2019, 102(8):4888-4898.
[16] XIA Y L, LU Z L, CAO J W, et al. Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing[J]. Scripta Materialia, 2019, 165:84-88.
[17] 付国太,刘洪军,张柏,等. PEEK的特性及应用[J]. 工程塑料应用, 2006, 34(10):69-71. FU G T, LIU H J, ZHANG B, et al. Characteristics and applications of PEEK[J]. Engineering Plastics Application, 2006, 34(10):69-71(in Chinese).
[18] DENAULT J, DUMOUCHEL M. Consolidation process of PEEK/Carbon composite for aerospace applications[J]. Advanced Performance Materials, 1998, 5(1):83-96.
[19] 张辉,方良超,陈奇海,等. 聚醚醚酮在航空航天领域的应用[J]. 新技术新工艺, 2018(10):5-8. ZHANG H, FANG L C, CHEN Q H, et al. Application of PEEK in aerospace industry[J]. New Technology & New Process, 2018(10):5-8(in Chinese).
[20] YANG C C, TIAN X Y, LI D C, et al. Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material[J]. Journal of Materials Processing Technology, 2017, 248:1-7.
[21] 周金文,陈兴玉,刘小栋,等. 非金属3D打印天线的结构成形精度测试方法与差异性分析[J]. 电加工与模具, 2019, 347(3):68-72. ZHOU J W, CHEN X Y, LIU X D, et al. Testing method and difference analysis of structural fabrication accuracy of non-metallic 3D printing antenna[J]. Electromachining & Mould, 2019, 347(3):68-72(in Chinese).
[22] YIN M, TIAN X Y, WU L L, et al. A Broadband and omnidirectional electromagnetic wave concentrator with gradient woodpile structure[J]. Optics Express, 2013, 21(16):19082-19090.
[23] MEI H, ZHAO X, ZHOU S, et al. 3D-printed oblique honeycomb Al₂O₃/SiCw structure for electromagnetic wave absorption[J]. Chemical Engineering Journal, 2019, 372:940-945.
[24] ISAKOV D V, LEI Q, CASTLES F, et al. 3D printed anisotropic dielectric composite with meta-material features[J]. Materials & Design, 2016, 93:423-430.
[25] 熊益军,王岩,王强,等. 一种基于3D打印技术的结构型宽频吸波超材料[J]. 物理学报, 2018, 67(8):106-113. XIONG Y J, WANG Y, WANG Q, et al. Structural broadband absorbing metamaterial based on three-dimensional printing technology[J]. Acta Physica Sinica, 2018, 67(8):106-113(in Chinese).
[26] ZUO Y, SU X, LI X, et al. Multimaterial 3D-printing of graphene/Li0.35Zn0.3Fe2.35O4 and graphene/carbonyl iron composites with superior microwave absorption properties and adjustable bandwidth[J]. Carbon, 2020, 167:62-74.
[27] YANG D, YIN Y, ZHANG Z, et al. Wide-angle microwave absorption properties of multilayer metamaterial fabricated by 3D printing[J]. Materials Letters, 2020, 281:128571.
[28] MARK G T, BENHAIM D, PARANGI A, et al. Methods for fiber reinforced additive manufacturing:US, 20150165691A1[P]. 2015-6-18.
[29] DICKSON A N, BARRY J N, MCDONNELL K A, et al. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing[J]. Additive Manufacturing, 2017,16:146-152.
[30] HU Q, DUAN Y, ZHANG H, et al. Manufacturing and 3D printing of continuous carbon fiber prepreg filament[J]. Journal of Materials Science, 2018, 53(3):1887-1898.
[31] YANG C C, TIAN X Y, LIU T F, et al. 3D printing for continuous fiber reinforced thermoplastic composites:mechanism and performance[J]. Rapid Prototyping Journal, 2017, 23(1):209-215.
[32] MATSUZAKI R, UEDA M, NAMIKIN M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation[J]. Scientific Reports, 2016, 6:23058.
[33] TIAN X Y, LIU T F, YANG C C, et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites[J]. Composites Part A:Applied Science and Manufacturing, 2016, 88:198-205.
[34] HOU Z H, TIAN X Y, ZHANG J, et al. 3D printed continuous fibre reinforced composite corrugated structure[J]. Composite Structures, 2018, 184:1005-1010.
[35] WANG Q R, TIAN X Y, HUANG L, et al. Programmable morphing composites with embedded continuous fibers by 4D printing[J]. Materials & Design, 2018, 155:404-413.
[36] JOHNSTON M M, WERKHEISER M J, SNYDER M P, et al. 3D printing in zero-G ISS technology demonstration[C]//AIAA SPACE 2014 Conference, 2014.
[37] HAFLEY R A, TAMINGER K M B, BIRD R K. Electron beam freeform fabrication in the space environment[C]//45th AIAA Aerospace Sciences Meeting and Exhibit, 2007:8-11.
[38] WERKHEISER N. In-space manufacturing (ISM):3D printing in space technology demonstration[R]. 2015.
[39] HOYT R P, CUSHING J I, SLOSTAD J T, et al. SpiderFab:An architecture for self-fabricating space systems[C]//AIAA SPACE 2013 Conference and Exposition, 2014:1-17.
[40] POP3D:3D printer in the space[EB/OL]. 2014. Altran, ESA, ALTRAN Italy. http://www.altran.it/en/pressnews/notizie-da-altran-italia/news/2014/pop3d-3d-printerspace.html#.V2dGkCN9671.
[41] 俄罗斯制成该国首台太空3D打印样机[EB/OL]. 2016-11-11. 新华社. http://www.xinhuanet.com/world/2016-11/11/c_1119894405.htm
[42] 王功,刘亦飞,程天锦,等. 空间增材制造技术的应用[J]. 空间科学学报, 2016, 36(4):571-576. WANG G, LIU Y F, CHENG T J, et al. Application of additive manufacturing technology for space[J]. Chinese Journal of Space Science. 2016, 36(4):571-576(in Chinese).
[43] LUO M, TIAN X Y, SHANG J, et al. Impregnation and interlayer bonding behaviours of 3 d-printed continuous carbon-fiber-reinforced poly-ether-ether-ketone composites[J]. Composites Part A:Applied Science and Manufacturing, 2019, 121:130-138.
[44] 刘腾飞,田小永,朱伟军,等. 连续碳纤维增强聚乳酸复合材料3D打印及回收再利用机理与性能[J]. 机械工程学报,2019, 55(7):128-134. LIU T F, TIAN X Y, ZHU W J, et al. Mechanism and performance of 3D printing and recycling for continuous carbon fiber reinforced PLA composites[J]. Journal of Mechanical Engineering, 2019, 55(7):128-134(in Chinese).

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献