[1] 范玉青, 张丽华.超大型复合材料机体部件应用技术的新进展——飞机制造技术的新跨越[J].航空学报, 2009, 30(3):534-543. FAN Y Q, ZHANG L H.New development of extra large composite aircraft components application technology-advance of aircraft manufacture technology[J].Acta Aeronautica et Astronautica Sinica, 2009, 30(3):534-543(in Chinese).
[2] 顾轶卓, 李敏, 李艳霞, 等.飞行器结构用复合材料制造技术与工艺理论进展[J].航空学报, 2015, 36(8):2773-2797. GU Y Z, LI M, LI Y X, et al.Progress on manufacturing technology and process theory of aircraft composite structure[J].Acta Aeronautica et Astronautica Sinica, 2015, 36(8):2773-2797(in Chinese).
[3] 岳广全, 张博明, 杜善义, 等.热压罐成型工艺所用框架式模具的变形分析[J].复合材料学报, 2009, 26(5):148-152. YUE G Q, ZHANG B M, DU S Y, et al.Geometrical deformations of the framed-mould in autoclave processing for composite structures[J].Acta Materiae Compositae Sinica, 2009, 26(5):148-152(in Chinese).
[4] 张铖, 梁宪珠, 王永贵, 等.热压罐工艺环境对于先进复合材料框架式成型模具温度场的影响[J].材料科学与工程学报, 2011, 29(4):547-553. ZHANG C, LIANG X Z, WANG Y G, et al.Rules of impact of autoclave environment on frame mould temperature field of advanced composites[J].Journal of Materials Science and Engineering, 2011, 29(4):547-553(in Chinese).
[5] 张铖, 梁宪珠, 胡江波, 等.拓扑优化在框架式模具结构选形中的应用[J].航空制造技术, 2012(9):62-63. ZHANG C, LIANG X Z, HU J B, et al.Application of topology optimization in structure selection of frame mould[J].Aeronautical Manufacturing Technology, 2012(9):62-63(in Chinese).
[6] WANG Q, WANG L Y, ZHU W D, et al.Design optimization of molds for autoclave process of composite manufacturing[J].Journal of Reinforced Plastics and Composites, 2017, 36(21):1564-1576.
[7] DING A X, LI S X, WANG J H, et al.A three-dimensional thermo-viscoelastic analysis of process-induced residual stress in composite laminates[J].Composite Structures, 2015, 129:60-69.
[8] PUSATCIOGLU S Y, HASSLER J C, FRICKE A L, et al.Effect of temperature gradients on cure and stress gradients in thick thermoset castings[J].Journal of applied Polymer Science, 1980, 25(3):381-393.
[9] 李桂东.复合材料构件热压罐成型工装设计关键技术研究[D].南京:南京航空航天大学, 2010:5-6. LI G D.Research on key technologies for tool design of composite components undergoing autoclave processing[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2010:5-6(in Chinese).
[10] ZHANG C, WANG Y G, LIANG X Z, et al.Research with CFX software on frame mould temperature field simulation in autoclave process[J].Polymers and Polymer Composites, 2009, 17(5):325-336.
[11] 施彬彬.基于知识的复合材料模具支撑结构设计[D].南京:南京航空航天大学, 2017:1-5. SHI B B.The knowledge-based design of structural support of composites component mould and die[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2017:1-5(in Chinese).
[12] 花蕾蕾, 安鲁陵, 匡海华, 等.复合材料构件热压罐成型模具温度均匀性分析[J].南京航空航天大学学报, 2019, 51(3):357-365. HUA L L, AN L L, KUANG H H, et al.Analysis of temperature field uniformity of composite mold in autoclave[J].Journal of Nanjing University of Aeronautics & Astronautics, 2019, 51(3):357-365(in Chinese).
[13] 王永贵, 梁宪珠.热压罐工艺的成型压力对框架式模具温度场的影响[J].玻璃钢/复合材料, 2009(4):70-73, 76. WANG Y G, LIANG X Z.The influence of molding pressure in autoclave technics on temperature field of frame tooling[J].Composites Science and Engineering, 2009(4):70-73, 76(in Chinese).
[14] HUANG X, XIE Y M.Evolutionary topology optimization of continuum structures:method and applications[M].New Jersey:John Wiley & Sons Ltd, 2010:173-187.
[15] ZHU J H, ZHANG W H, XIA L.Topology optimization in aircraft and aerospace structures design[J].Archives of Computational Methods in Engineering, 2016, 23(4):595-622.
[16] 贾东升, 高彤, 唐磊, 等.热压罐成型复合材料所用框架式模具热弹性耦合优化设计[J].航空制造技术, 2019, 62(21):79-82. JIA D S, GAO T, TANG L, et al.Thermo-elastic topology optimization of framed mould used in autoclave processing for composite structures forming[J].Aeronautical Manufacturing Technology,2019, 62(21):79-82(in Chinese).
[17] GIBBONS G, WIMPENNY D.Mechanical and thermomechanical properties of metal spray invar for composite forming tooling[J].Journal of Materials Engineering and Performance, 2000, 9(6):630-637.
[18] NAN J M, LI G X, XU K W.Yielding behavior of low expansion invar alloy at elevated temperature[J].Journal of Materials Processing Technology, 2001, 114(1):36-40.
[19] 赵安安, 杨昊彤, 岳明, 等.模具结构对热压罐成型过程中模具温均性与热变形的影响分析[J].材料科学与工程学报, 2020, 38(6):869-875. ZHAO A A, YANG H T, YUE M, et al.Influence of mold structure on temperature uniformity and thermal deformation of mold in autoclave process[J].Journal of Materials Science and Engineering, 2020, 38(6):869-875(in Chinese).
[20] BENDSØE M P.Optimal shape design as a material distribution problem[J].Structural and Multidisciplinary Optimization, 1989, 1(4):193-202.
[21] XIE M Y, STEVEN G P.A simple evolutionary procedure for structural optimization[J].Computers & Structures, 1993, 49(5):885-896.
[22] WANG M Y, WANG X M, GUO D M.A level set method for structural topology optimization[J].Computer Methods in Applied Mechanics and Engineering, 2003, 35(7):415-441.
[23] BENDSØE M P, SIGMUND O.Material interpolation schemes in topology optimization[J].Archive of Applied Mechanics, 1999, 69(9-10):635-654.
[24] MONAGHAN P F, BROGAN M T, OOSTHUIZEN P H.Heat transfer in an autoclave for processing thermoplastic composites[J].Composites Manufacturing, 1991, 2(3-4):33-242.
[25] ARAFATH A, SLESINGER N, SHIMIZU T, et al.Hear transfer coefficient distribution inside an autoclave[C]//17th international conference on composite material ICCM.Edinburgh:Edinburgh International Conference Centre, 2009.
[26] 张铖.大型复合材料结构热压罐工艺温度场权衡设计[D].哈尔滨:哈尔滨工业大学, 2009:21-26. ZHANG C.Curing temperature field tradeoff design method of large-scale composite material structure in autoclave process[D].Harbin:Harbin Institute of Technology, 2009:21-26(in Chinese).
[27] MOHAN R M, MOIN P.Direct simulations of turbulent flow using finite-difference schemes[J].Journal of Computational Physics, 1991, 96(1):15-53.
[28] 张强, 杨永, 段毅.一种EASM k-ω两方程湍流模型的应用研究[J].西北工业大学学报, 2005, 23(1):89-92. ZHANG Q, YANG Y, DUAN Y.On exploring predicting precision of an EASM k-ω two-equation turbulence Model[J].Journal of Northwestern Polytechnical University, 2005, 23(1):89-92(in Chinese).
[29] 胡海洋, 王强.一种能克服两方程湍流模型刚性的流热一体化算法[J].计算物理, 2009, 26(5):685-692. HU H Y, WANG Q.Flow heat transfer integrated method overcoming stiffness in two-equation turbulence models[J].Chinese Journal of Computational Physics, 2009, 26(5):685-692(in Chinese).
[30] WANG Q, WANG L Y, ZHU W D, et al.Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates[J].Journal of Composite Materials, 2020, 54(1):127-138.
[31] CHEN F, ZHAN L H, XU Y Q.Simulation of mold temperature distribution in a running process autoclave[J].Iranian Polymer Journal, 2015, 24(11):927-934.
[32] 熊蓉, 安鲁陵, 花蕾蕾, 等.热压罐成型过程中框架式模具温度场模拟与分析[J].宇航材料工艺, 2020, 50(1):15-21. XIONG R, AN L L, HUA L L, et al.Simulation and analysis on temperature field of frame mold in autoclave process[J].Aerospace Materials & Technology, 2020, 50(1):15-21(in Chinese).
CJA