[1] ISO/ASTM. Additive manufacturing-General principles-Terminology:52900-2015[S]. Geneva:ISO, 2015.
[2] 魏青松, 史玉升. 增材制造技术原理与应用[M]. 北京:科学出版社, 2017:1-7. WEI Q S, SHI Y S. The theory and application of additive manufacturing[M]. Beijing:Science Press, 2017:1-7(in Chinese).
[3] 刘腾飞, 田小永, 朱伟军, 等. 连续碳纤维增强聚乳酸复合材料3D打印及回收再利用机理与性能[J]. 机械工程学报, 2019, 55(7):128-134. LIU T F, TIAN X Y, ZHU W J, et al. Mechanism and performance of 3D printing and recycling for continuous carbon fiber reinforced PLA composites[J]. Journal of Mechanical Engineering, 2019, 55(7):128-134(in Chinese).
[4] 张肖男, 单忠德, 范聪泽, 等. 增材制造用PLA/连续碳纤复合材料力学性能[J]. 工程塑料应用, 2019, 47(8):91-95. ZHANG X N, SHAN Z D, FAN C Z, et al. Mechanical properties of PLA/continuous carbon fiber composites by additive manufacturing[J]. Engineering Plastics Application, 2019, 47(8):91-95(in Chinese).
[5] 耿鹏. 聚醚醚酮及其复合材料增材制造机理与实验研究[D]. 长春:吉林大学, 2019. GENG P. Research on additive manufacturing mechanism of polyetheretherketone and its composites[D]. Changchun:Jilin University, 2019(in Chinese).
[6] WANG X, JIANG M, ZHOU Z W, et al. 3D printing of polymer matrix composites:A review and prospective[J]. Composites Part B:Engineering, 2017, 110:442-458.
[7] PARANDOUSH P, LIN D. A review on additive manufacturing of polymer-fiber composites[J]. Composite Structures, 2017, 182:36-53.
[8] 毕向军, 田小永, 张帅, 等. 连续纤维增强热塑性复合材料3D打印的研究进展[J]. 工程塑料应用, 2019, 47(2):138-142. BI X J, TIAN X Y, ZHANG S, et al. Research progress in 3D printing technology of continuous fiber reinforced thermoplastic composites[J]. Engineering Plastics Application, 2019, 47(2):138-142(in Chinese).
[9] BRENKEN B, BAROCIO E, FAVALORO A, et al. Fused filament fabrication of fiber-reinforced polymers:A review[J]. Additive Manufacturing, 2018, 21:1-16.
[10] THOMPSON M K, MORONI G, VANEKER T, et al. Design for additive manufacturing:Trends, opportunities, considerations, and constraints[J]. CIRP Annals, 2016, 65(2):737-760.
[11] 杰里米·里夫金. 第三次工业革命[M]. 张体伟, 孙豫宁, 译. 北京:中信出版社, 2012:27-141. RIFKIN J. The third industrial revolution[M]. ZHANG T W, SUN Y N, translated. Beijing:CITIC Press, 2012:27-141(in Chinese).
[12] 姚俊峰, 张俊, 阙锦龙. 3D打印理论与应用[M]. 北京:科学出版社, 2017:15-37. YAO J F, ZHANG J, QUE J L. The theory and application of 3D printing[M]. Beijing:Science Press, 2017:15-37(in Chinese).
[13] 国家制造强国建设战略咨询委员会, 中国工程院战略咨询中心. 《中国制造2025》重点领域技术创新绿皮书——技术路线图(2017)[M]. 北京:电子工业出版社, 2018:35-108, 233-295. National Manufacturing Strategy Advisory Committee, Chinese Academy of Engineering of Chinese Academy of Engineering. 《Made in China 2025》Green book for technological innovation in key fields-Technology Roadmap (2017)[M]. Beijing:Publishing House of Electronics Industry, 2018:35-108, 233-295(in Chinese).
[14] 杜善义, 关志东. 我国大型客机先进复合材料技术应对策略思考[J]. 复合材料学报, 2008, 25(1):1-10. DU S Y, GUAN Z D. Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J]. Acta Materiae Compositae Sinica, 2008, 25(1):1-10(in Chinese).
[15] 闫东东, 单忠德, 战丽, 等. 3D打印复合材料开孔板力学性能影响规律[J]. 中国机械工程, 2020, 31(10):1240-1245. YAN D D, SHAN Z D, ZHAN L, et al. Influences law of mechanics properties of 3D printing composite open-hole plates[J]. China Mechanical Engineering, 2020, 31(10):1240-1245(in Chinese).
[16] 田小永, 刘腾飞, 杨春成, 等. 高性能纤维增强树脂基复合材料3D打印及其应用探索[J]. 航空制造技术, 2016, 59(15):26-31. TIAN X Y, LIU T F, YANG C C, et al. 3D printing for high performance fiber reinforced polymer composites and exploration on its applications[J]. Aeronautical Manufacturing Technology, 2016, 59(15):26-31(in Chinese).
[17] 罗盟, 田小永, 尚俊凡, 等. 高性能纤维增强聚醚醚酮复合材料挤出成型增材制造现状与挑战[J]. 航空制造技术, 2020, 63(15):39-47. LUO M, TIAN X Y, SHANG J F, et al. Status and challenge of materials extrusion additive manufacturing for high-performance fiber reinforced poly(ether ether ketone) composites[J]. Aeronautical Manufacturing Technology, 2020, 63(15):39-47(in Chinese).
[18] 田小永, 侯章浩, 张俊康, 等. 高性能树脂基复合材料轻质结构3D打印与性能研究[J]. 航空制造技术, 2017, 60(10):34-39. TIAN X Y, HOU Z H, ZHANG J K, et al. Study on 3D printing process and performance of resin matrix composite lightweight structure[J]. Aeronautical Manufacturing Technology, 2017, 60(10):34-39(in Chinese).
[19] MATSUZAKI R, UEDA M, NAMIKI M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation[J]. Scientific Reports, 2016, 6:23058.
[20] GRAY IV R W, BAIRD D G, BØHN J H. Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling[J]. Polymer Composites, 1998, 19(4):383-394.
[21] MELENKA G W, CHEUNG B K O, SCHOFIELD J S, et al. Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures[J]. Composite Structures, 2016, 153:866-875.
[22] BLOK L G, LONGANA M L, YU H, et al. An investigation into 3D printing of fibre reinforced thermoplastic composites[J]. Additive Manufacturing, 2018, 22:176-186.
[23] AKASHEH F, AGLAN H. Fracture toughness enhancement of carbon fiber-reinforced polymer composites utilizing additive manufacturing fabrication[J]. Journal of Elastomers & Plastics, 2019, 51(7-8):698-711.
[24] CHACÓN J M, CAMINERO M A, NÚÑEZ P J, et al. Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling:Effect of process parameters on mechanical properties[J]. Composites Science and Technology, 2019, 181:107688.
[25] JUSTO J, TÁVARA L, GARCÍA-GUZMÁN L, et al. Characterization of 3D printed long fibre reinforced composites[J]. Composite Structures, 2018, 185:537-548.
[26] VAN DER KLIFT F, KOGA Y, TODOROKI A, et al. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens[J]. Open Journal of Composite Materials, 2016, 6(1):18-27.
[27] DICKSON A N, BARRY J N, MCDONNELL K A, et al. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing[J]. Additive Manufacturing, 2017, 16:146-152.
[28] GOH G D, DIKSHIT V, NAGALINGAM A P, et al. Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics[J]. Materials & Design, 2018, 137:79-89.
[29] CHABAUD G, CASTRO M, DENOUAL C, et al. Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications[J]. Additive Manufacturing, 2019, 26:94-105.
[30] OZTAN C, KARKKAINEN R, FITTIPALDI M, et al. Microstructure and mechanical properties of three dimensional-printed continuous fiber composites[J]. Journal of Composite Materials, 2019, 53(2):271-280.
[31] AL ABADI H, THAI H T, PATON-COLE V, et al. Elastic properties of 3D printed fibre-reinforced structures[J]. Composite Structures, 2018, 193:8-18.
[32] GOH G D, YAP Y L, AGARWALA S, et al. Recent progress in additive manufacturing of fiber reinforced polymer composite[J]. Advanced Materials Technologies, 2019, 4(1):1800271.
[33] MEI H, ALI Z, YAN Y K, et al. Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites[J]. Additive Manufacturing, 2019, 27:150-158.
[34] PYL L, KALTEREMIDOU K A, VAN HEMELRIJCK D. Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests[J]. Composites Science and Technology, 2019, 171:135-151.
[35] YANG C C, TIAN X Y, LIU T F, et al. 3D printing for continuous fiber reinforced thermoplastic composites:Mechanism and performance[J]. Rapid Prototyping Journal, 2017, 23(1):209-215.
[36] TIAN X Y, LIU T F, WANG Q R, et al. Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites[J]. Journal of Cleaner Production, 2017, 142:1609-1618.
[37] LI N Y, LI Y G, LIU S T. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing[J]. Journal of Materials Processing Technology, 2016, 238:218-225.
[38] MING Y K, DUAN Y G, WANG B, et al. A novel route to fabricate high-performance 3D printed continuous fiber-reinforced thermosetting polymer composites[J]. Materials (Basel, Switzerland), 2019, 12(9):1369.
[39] VAN DE WERKEN N, HURLEY J, KHANBOLOUKI P, et al. Design considerations and modeling of fiber reinforced 3D printed parts[J]. Composites Part B:Engineering, 2019, 160:684-692.
[40] 杨卫民, 鉴冉冉. 聚合物3D打印与3D复印技术[M]. 北京:化学工业出版社, 2018:1-14. YANG W M, JIAN R R. Polymer 3D printing technology[M]. Beijing:Chemical Industry Press, 2018:1-14(in Chinese).
[41] PARANDOUSH P, TUCKER L, ZHOU C, et al. Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites[J]. Materials & Design, 2017, 131:186-195.
[42] ZINDANI D, KUMAR K. An insight into additive manufacturing of fiber reinforced polymer composite[J]. International Journal of Lightweight Materials and Manufacture, 2019, 2(4):267-278.
[43] NIKZAD M, MASOOD S H, SBARSKI I. Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling[J]. Materials & Design, 2011, 32(6):3448-3456.
[44] LI Y, FENG Z Y, HUANG L J, et al. Additive manufacturing high performance graphene-based composites:A review[J]. Composites Part A:Applied Science and Manufacturing, 2019, 124:105483.
[45] GNANASEKARAN K, HEIJMANS T, VAN BENNEKOM S, et al. 3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling[J]. Applied Materials Today, 2017, 9:21-28.
[46] BERRETTA S, DAVIES R, SHYNG Y T, et al. Fused Deposition Modelling of high temperature polymers:Exploring CNT PEEK composites[J]. Polymer Testing, 2017, 63:251-262.
[47] VAN DE WERKEN N, TEKINALP H, KHANBOLOUKI P, et al. Additively manufactured carbon fiber-reinforced composites:State of the art and perspective[J]. Additive Manufacturing, 2020, 31:100962.
[48] GOH G D, YAP Y L, TAN H K J, et al. Process-structure-properties in polymer additive manufacturing via material extrusion:A review[J]. Critical Reviews in Solid State and Materials Sciences, 2020, 45(2):113-133.
[49] DOMINGO-ESPIN M, PUIGORIOL-FORCADA J M, GARCIA-GRANADA A A, et al. Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts[J]. Materials & Design, 2015, 83:670-677.
[50] SHI B H, SHANG Y Y, ZHANG P, et al. Dynamic capillary-driven additive manufacturing of continuous carbon fiber composite[J]. Matter, 2020, 2(6):1594-1604.
[51] 明越科, 段玉岗, 王奔, 等. 高性能纤维增强树脂基复合材料3D打印[J]. 航空制造技术, 2019, 62(4):34-38, 46. MING Y K, DUAN Y G, WANG B, et al. 3D printing for high performance fiber reinforced polymer composites[J]. Aeronautical Manufacturing Technology, 2019, 62(4):34-38, 46(in Chinese).
[52] ABBOTT A, GIBSON T, TANDON G P, et al. Melt extrusion and additive manufacturing of a thermosetting polyimide[J]. Additive Manufacturing, 2021, 37:101636.
[53] HAO W F, LIU Y, ZHOU H, et al. Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites[J]. Polymer Testing, 2018, 65:29-34.
[54] MING Y K, ZHANG S Q, HAN W, et al. Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites[J]. Additive Manufacturing, 2020, 33:101184.
[55] KABIR S M F, MATHUR K, SEYAM A F M. A critical review on 3D printed continuous fiber-reinforced composites:History, mechanism, materials and properties[J]. Composite Structures, 2020, 232:111476.
[56] CINCINNATI INC. Homepage[EB/OL]. 2020.http://www.e-c.com.
[57] HASSEN A A, SPRINGFIELD R, LINDAHL J, et al. The durability of large-scale additive manufacturing composite molds[C]//CAMX Conference Proceedings. Arlington:American Composites Manufacturers Association, 2016.
[58] THERMWOOD. Homepage[EB/OL]. 2020.http://www.thermwood.com.
[59] SUN Q, RIZVI G M, BELLEHUMEUR C T, et al. Effect of processing conditions on the bonding quality of FDM polymer filaments[J]. Rapid Prototyping Journal, 2008, 14(2):72-80.
[60] TIAN X Y, LIU T F, YANG C C, et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites[J]. Composites Part A:Applied Science and Manufacturing, 2016, 88:198-205.
[61] LIU T F, TIAN X Y, ZHANG M Y, et al. Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites[J]. Composites Part A:Applied Science and Manufacturing, 2018, 114:368-376.
[62] 单忠德, 范聪泽, 孙启利, 等. 纤维增强树脂基复合材料增材制造技术与装备研究[J]. 中国机械工程, 2020, 31(2):221-226. SHAN Z D, FAN C Z, SUN Q L, et al. Research on additive manufacturing technology and equipment for fiber reinforced resin composites[J]. China Mechanical Engineering, 2020, 31(2):221-226(in Chinese).
[63] YOUNG D, WETMORE N, CZABAJ M. Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene[J]. Additive Manufacturing, 2018, 22:508-515.
[64] ALIHEIDARI N, TRIPURANENI R, AMELI A, et al. Fracture resistance measurement of fused deposition modeling 3D printed polymers[J]. Polymer Testing, 2017, 60:94-101.
[65] NING F D, CONG W L, HU Y B, et al. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling:Effects of process parameters on tensile properties[J]. Journal of Composite Materials, 2017, 51(4):451-462.
[66] HOU Z H, TIAN X Y, ZHANG J K, et al. 3D printed continuous fibre reinforced composite corrugated structure[J]. Composite Structures, 2018, 184:1005-1010.
[67] HU Q X, DUAN Y C, ZHANG H G, et al. Manufacturing and 3D printing of continuous carbon fiber prepreg filament[J]. Journal of Materials Science, 2018, 53(3):1887-1898.
[68] CHACÓN J M, CAMINERO M A, GARCÍA-PLAZA E, et al. Additive manufacturing of PLA structures using fused deposition modelling:Effect of process parameters on mechanical properties and their optimal selection[J]. Materials & Design, 2017, 124:143-157.
[69] CAMINERO M A, CHACÓN J M, GARCÍA-MORENO I, et al. Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling[J]. Composites Part B:Engineering, 2018, 148:93-103.
[70] CAMINERO M A, CHACÓN J M, GARCÍA-MORENO I, et al. Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling[J]. Polymer Testing, 2018, 68:415-423.
[71] Mark Forged. Homepage[EB/OL]. 2018. https://Markforged.com.
[72] KOTLINSKI J. Mechanical properties of commercial rapid prototyping materials[J]. Rapid Prototyping Journal, 2014, 20(6):499-510.
[73] LANZOTTI A, GRASSO M, STAIANO G, et al. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer[J]. Rapid Prototyping Journal, 2015, 21(5):604-617.
[74] ISO/ASTM. Standard terminology for additive manufacturing-Coordinate system and test methodologies:52921-2013[S]. Geneva:ISO, 2013.
[75] ARAYA-CALVO M, LÓPEZ-GÓMEZ I, CHAMBERLAIN-SIMON N, et al. Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology[J]. Additive Manufacturing, 2018, 22:157-164.
[76] JANSSON A, PEJRYD L. Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering[J]. Additive Manufacturing, 2016, 9:7-13.
[77] ONWUBOLU G C, RAYEGANI F. Characterization and optimization of mechanical properties of ABS parts manufactured by the fused deposition modelling process[J]. International Journal of Manufacturing Engineering, 2014:598531.
[78] SOOD A K, OHDAR R K, MAHAPATRA S S. Parametric appraisal of mechanical property of fused deposition modelling processed parts[J]. Materials & Design, 2010, 31(1):287-295.
[79] PINHO S T, IANNUCCI L, ROBINSON P. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking:Part I:Development[J]. Composites Part A:Applied Science and Manufacturing, 2006, 37(1):63-73.
[80] PUCK A, SCHVRMANN H. Failure analysis of FRP laminates by means of physically based phenomenological models[J]. Composites Science and Technology, 1998, 58(7):1045-1067.
[81] CHEN X M, SUN X S, WANG B W, et al. An improved longitudinal failure criterion for UD composites based on kinking model[J]. Mechanics of Advanced Materials and Structures, 2020:1-11.
[82] 黄争鸣, 张华山. 纤维增强复合材料强度理论的研究现状与发展趋势:"破坏分析奥运会"评估综述[J]. 力学进展, 2007, 37(1):80-98. HUANG Z M, ZHANG H S. Current status and future trend of researches on the strength of fiber-reinforced composites-A summary of the results from a "failure Olympics"[J]. Advances in Mechanics, 2007, 37(1):80-98(in Chinese).
[83] 姚辽军. 复合材料层间Ⅰ型静态及疲劳断裂机理研究[D]. 西安:西北工业大学, 2016. YAO L J. Mode Ⅰ quasi-static and fatigue delamination growth in composite laminates[D]. Xi'an:Northwestern Polytechnical University, 2016(in Chinese).
[84] YAO L J, CUI H, SUN Y, et al. Fibre-bridged fatigue delamination in multidirectional composite laminates[J]. Composites Part A:Applied Science and Manufacturing, 2018, 115:175-186.
[85] CHEN X M, SUN X S, CHEN P H, et al. A delamination failure criterion considering the effects of through-thickness compression on the interlaminar shear failure of composite laminates[J]. Composite Structures, 2020, 241:112121.
[86] MAIMÍ P, CAMANHO P P, MAYUGO J A, et al. Matrix cracking and delamination in laminated composites. Part I:Ply constitutive law, first ply failure and onset of delamination[J]. Mechanics of Materials, 2011, 43(4):169-185.
[87] MAIMÍ P, CAMANHO P P, MAYUGO J A, et al. A continuum damage model for composite laminates:Part I-Constitutive model[J]. Mechanics of Materials, 2007, 39(10):897-908.
[88] GARCÍA-RODRÍGUEZ S M, COSTA J, MAIMÍ P, et al. Experimental demonstration of the in situ effect under transverse shear[J]. Composites Part A:Applied Science and Manufacturing, 2020, 138:106047.
[89] ZUBILLAGA L, TURON A, RENART J, et al. An experimental study on matrix crack induced delamination in composite laminates[J]. Composite Structures, 2015, 127:10-17.
[90] MORTELL D J, TANNER D A, MCCARTHY C T. In-situ SEM study of transverse cracking and delamination in laminated composite materials[J]. Composites Science and Technology, 2014, 105:118-126.
[91] NING F D, CONG W L, QIU J J, et al. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling[J]. Composites Part B:Engineering, 2015, 80:369-378.
[92] YEOLE P, HASSEN A A, KIM S, et al. Mechanical characterization of high-temperature carbon fiber-polyphenylene sulfide composites for large area extrusion deposition additive manufacturing[J]. Additive Manufacturing, 2020, 34:101255.
[93] LUO M, TIAN X Y, SHANG J F, et al. Impregnation and interlayer bonding behaviours of 3D-printed continuous carbon-fiber-reinforced poly-ether-ether-ketone composites[J]. Composites Part A:Applied Science and Manufacturing, 2019, 121:130-138.
[94] 张曼玉, 刘腾飞, 田小永, 等. 面向3D打印的连续碳纤维上浆工艺及其对复合材料性能的影响[J]. 中国材料进展, 2020, 39(5):349-355, 363. ZHANG M Y, LIU T F, TIAN X Y, et al. Sizing process of continuous carbon fiber for 3D printing and its influence on the properties of composites[J]. Materials China, 2020, 39(5):349-355, 363(in Chinese).
[95] 赵广宾, 秦勉, 刘雨, 等. 聚醚醚酮熔融沉积成形强度工艺参数的优化[J]. 机械工程学报, 2020, 56(3):216-222. ZHAO G B, QIN M, LIU Y, et al. Optimizing fused deposition molding process parameters for improving forming strength of polyetheretherketone[J]. Journal of Mechanical Engineering, 2020, 56(3):216-222(in Chinese).
[96] WANG J L, XIE H M, WENG Z X, et al. A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling[J]. Materials & Design, 2016, 105:152-159.
[97] BETTINI P, ALITTA G, SALA G, et al. Fused deposition technique for continuous fiber reinforced thermoplastic[J]. Journal of Materials Engineering and Performance, 2017, 26(2):843-848.
[98] DICKSON A N, DOWLING D P. Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing[J]. Composite Structures, 2019, 212:381-388.
[99] 赵丽滨, 龚愉, 张建宇. 纤维增强复合材料层合板分层扩展行为研究进展[J]. 航空学报, 2019, 40(1):522509. ZHAO L B, GONG Y, ZHANG J Y. A survey on delamination growth behavior in fiber reinforced composite laminates[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(1):522509(in Chinese).
[100] KISHORE V, AJINJERU C, NYCZ A, et al. Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components[J]. Additive Manufacturing, 2017, 14:7-12.
[101] DRANSFIELD K, BAILLIE C, MAI Y W. Improving the delamination resistance of CFRP by stitching-A review[J]. Composites Science and Technology, 1994, 50(3):305-317.
[102] MOURITZ A P. Review of z-pinned composite laminates[J]. Composites Part A:Applied Science and Manufacturing, 2007, 38(12):2383-2397.
[103] PEGORIN F, PINGKARAWAT K, DAYNES S, et al. Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites[J]. Composites Part B:Engineering, 2015, 78:298-307.
[104] STORCK S, MALECKI H, SHAH T, et al. Improvements in interlaminar strength:A carbon nanotube approach[J]. Composites Part B:Engineering, 2011, 42(6):1508-1516.
[105] FALZON B G, HAWKINS S C, HUYNH C P, et al. An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface[J]. Composite Structures, 2013, 106:65-73.
[106] 矫桂琼, 宁荣昌, 卢智先, 等. 层间增韧复合材料研究[J]. 宇航材料工艺, 2001, 31(4):36-39. JIAO G Q, NING R C, LU Z X, et al. A study on interleaved composites[J]. Aerospace Materials & Technology, 2001, 31(4):36-39(in Chinese).
[107] HOJO M, ANDO T, TANAKA M, et al. Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf[J]. International Journal of Fatigue, 2006, 28(10):1154-1165.
[108] DUTY C, FAILLA J, KIM S, et al. Z-pinning approach for 3D printing mechanically isotropic materials[J]. Additive Manufacturing, 2019, 27:175-184.
[109] KIM S, SMITH T, FAILLA J, et al. Parametric analysis on vertical pins for strengthening extrusion-based printed parts[C]//SAMPE 2018. Diamond Bar:Society for the Advancement of Material and Process Engineering, 2018.
[110] DUTY C, FAILLA J, KIM S, et al. Reducing mechanical anisotropy in extrusion-based printed parts[C]//Solid Freeform Fabrication:Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference. Austin:University of Austin, 2017:1602-1612.
[111] DUTY C, FAILLA J, KIM S, et al. Z-pining approach for reducing anisotropy of 3D printed parts[C]//Solid Freeform Fabrication:Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference. Austin:University of Austin, 2018:2405-2412.
[112] ISLAM M S, PRABHAKAR P. Interlaminar strengthening of multidirectional laminates using polymer additive manufacturing[J]. Materials & Design, 2017, 133:332-339.
[113] DAMODARAN V, CASTELLANOS A G, MILOSTAN M, et al. Improving the Mode-II interlaminar fracture toughness of polymeric matrix composites through additive manufacturing[J]. Materials & Design, 2018, 157:60-73.
[114] NARANJO-LOZADA J, AHUETT-GARZA H, ORTA-CASTAÑÓN P, et al. Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing[J]. Additive Manufacturing, 2019, 26:227-241.
[115] YU T, ZHANG Z Y, SONG S T, et al. Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites[J]. Composite Structures, 2019, 225:111147.
[116] MELENKA G W, SCHOFIELD J S, DAWSON M R, et al. Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer[J]. Rapid Prototyping Journal, 2015, 21(5):618-627.
[117] ZHANG H Q, YANG D M, SHENG Y. Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites:A preliminary numerical study[J]. Composites Part B:Engineering, 2018, 151:256-264.
CJA