综述

第四代战斗机动力技术特征和实现途径

  • 程荣辉 ,
  • 张志舒 ,
  • 陈仲光
展开
  • 中国航发沈阳发动机研究所, 沈阳 110015

收稿日期: 2018-09-19

  修回日期: 2018-10-16

  网络出版日期: 2018-11-23

Technical characteristics and implementation of the fourth-generation jet fighter engines

  • CHENG Ronghui ,
  • ZHANG Zhishu ,
  • CHEN Zhongguang
Expand
  • AECC Shenyang Engine Research Institute, Shenyang 110015, China

Received date: 2018-09-19

  Revised date: 2018-10-16

  Online published: 2018-11-23

摘要

介绍了第四代战斗机的典型特点和对发动机的要求,综述了第四代发动机采用高性能循环参数、高推重比技术、推力矢量技术、隐身技术、全权限数字式控制系统、健康管理系统、热管理技术、高可靠性和维修性的设计思路和典型技术特征,并研究分析了实现途径,同时指出第四代发动机的成功研制还需要依赖先进成熟的基础技术和科学的管理做支撑。总结了第四代发动机的设计特点,指出应注重综合权衡设计。

本文引用格式

程荣辉 , 张志舒 , 陈仲光 . 第四代战斗机动力技术特征和实现途径[J]. 航空学报, 2019 , 40(3) : 22698 -022698 . DOI: 10.7527/S1000-6893.2018.22698

Abstract

This article introduces the typical features of the fourth-generation jet fighters and the engine requirements of these jets. It reviews the design concept and typical technical features used in the fourth-generation engines, including high performance cycle parameters, high thrust-to-weight ratio, vectored thrust, stealth, FADEC,EHM, thermal management technology, and design techniques of high reliability and maintainability. This article also analyzes the implementation path of these technologies, and puts forward that a successful development of the fourth-generation engine depends on the advanced, mature basic technology and scientific management. Above all, this article summarizes the designing features of the fourth-generation engines and emphasizes the importance of a comprehensive and balanced design.

参考文献

[1] 陈光. F119发动机的设计特点[J]. 航空发动机, 2000, 26(1):21-29. CHEN G. Design features of jet engine F119[J]. Aeroengine, 2000, 26(1):21-29(in Chinese).
[2] Минпромторг. Состоялся первый полёт летающей лаборатории T-50с двигателем 2-го этапа[EB/OL]. (2017-12-05).http://www.minpromtorg.gov.ru/.Minpromtorg. The first flight of the flying laboratory T-50 with the engine of the second stage took place[EB/OL]. (2017-12-05).http://www.minpromtorg.gov.ru/(in Russian).
[3] DESKINW J, YANKEL J J. Development of the F-22 propulsion system:AIAA-2002-3624[R]. Reston, VA:AIAA, 2002.
[4] MARTINJ J. A future military propulsion vision:AIAA-2003-2724[R]. Reston, VA:AIAA, 2003.
[5] EHRLICHH, KURZ K H, RUED K P, et al. Trends in military aeroengine-design-From EJ200 to future manned and unmanned vehicle propulsion:AIAA-2003-2612[R]. Reston, VA:AIAA, 2003.
[6] OBAIDY, MARK V A, RICHARD M M, et al. Military jet engine acquisition-technology basics and cost-estimating methodology[M]. Santa Monica:RAND, 2002:67.
[7] 陈杰. 航空发动机轴对称矢量喷管控制技术研究[D]. 南京:南京航空航天大学, 2012:2. CHEN J. Study of control technology for aero-engine AVEN[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012:2(in Chinese).
[8] 邓洪伟, 尚守堂, 金海, 等. 航空发动机隐身技术分析与论述[J]. 航空科学技术, 2017, 28(10):1-7. DENG H W, SHANG S T, JIN H, et al. Analysis and discussion on stealth technology of tero engine[J]. Aeronautical Science & Technology, 2017, 28(10):1-7(in Chinese).
文章导航

/