备件携行量研究方法综述
收稿日期: 2015-11-03
修回日期: 2015-11-21
网络出版日期: 2016-01-11
Survey on amount configuration methods of carrying spare parts
Received date: 2015-11-03
Revised date: 2015-11-21
Online published: 2016-01-11
徐宗昌 , 张永强 , 呼凯凯 , 岳付昌 . 备件携行量研究方法综述[J]. 航空学报, 2016 , 37(9) : 2623 -2633 . DOI: 10.7527/S1000-6893.2015.0358
Spare parts are very important support resources to repair naval carrier aircrafts when they are failure at sea, and number of spare parts that should be carried in a warship is influenced by requirements of maintenance cost, storage space of ship, and operational availability of equipment. Aiming at the problem of how to calculate the number of carrying spare parts before sailing out, common methods and the latest development are analyzed and summarized. Three types of methods, demand forecasting method, sequential optimization method of maintenance first and spare parts second, and joint optimization method of both, are paid special attention to. Features and applicable occasions of the three methods are compared with each other from the points of maintenance cost, storage space of ship, and operational availability of equipment. After comparison of these methods, we conclude that joint optimization is the most suitable method for carrying spare parts configuration. Finally, future research directions of joint optimization method of carrying spare parts are proposed.
[1] 任敏. 备件供应学[M]. 北京: 国防工业出版社, 2013: 179-182. REN M. Spare parts supply[M]. Beijing: National Defense Industry Press, 2013:179-182 (in Chinese).
[2] CROSTON J D. Forecasting and stock control for intermittent demands[J]. Source Operational Research Quarterly, 1972, 23(3): 289-303.
[3] SYNTETOS A A, BOYLAN J E. On the bias of intermittent demand estimates[J]. International Journal of Production Economics, 2001, 71(1): 457-466.
[4] SYNTETOS A A, BOYLAN J E. The accuracy of intermittent demand estimates[J]. International Journal of Forecasting, 2005, 21(1): 303-314.
[5] BOYLAN J E, SYNTETOS A A. Intermittent demand forecasting: size-interval methods based on average and smoothing[C]//Proceedings of the International Conference on Quantitative Methods in Industry and Commerce. Piscataway, NJ: IEEE Press, 2003: 87-96.
[6] SHALE E A, BOYLAN J E, JOHNSTON F R. Forecasting for intermittent demand: The estimation of an unbiased average[J]. Journal of the Operational Research Society, 2006, 57(1): 588-592.
[7] TEUNTER R, SANI B. On the bias of Croston's forecasting method[J]. European Journal of Operational Research, 2009, 194(1): 177-183.
[8] TEUNTER R H, SYNTETOS A A, BABAI M Z. Intermittent demand: Linking forecasting to inventory obsolescence[J]. European Journal of Operational Research, 2011, 214(3): 606-615.
[9] XU Q Z, WANG N, SHI H P. A review of Croston's method for intermittent demand forecasting[C]//2012 9th International Conference on Fuzzy Systems and Knowledge Discovery. Piscataway, NJ: IEEE Press, 2012: 1456-1460.
[10] EFRON B. Bootstrap methods: Another look at the jacknife[J]. Annals of Statistics,1979,7(1): 1-26.
[11] BOOKBINDER J, LORDAHL A. Estimation of inventory re-order levels using the bootstrap statistical procedure[J]. IIE Transactions,1989, 21(4): 302-312.
[12] WILLEMAIN T, SMART C, SCHWARTZ H. A new approach to forecasting intermittent demand for service parts inventories[J]. International Journal of Forecast, 2004, 20(1): 375-387.
[13] HUA Z, ZHANG B, YANG J, et al. A new approach of forecasting intermittent demand for spare parts inventories in the process industries[J]. Journal of the Operations Research Society, 2007, 58(1): 52-61.
[14] PORRAS E, DEKKER R. An inventory control system for spare parts at a refinery: An empirical comparison of different re-order point methods[J].European Journal of Operational Research, 2008, 184(1): 101-132.
[15] TEUNTER R, DUNCAN L. Forecasting intermittent demand: A comparative study[J]. Journal of the Operations Research Society, 2009, 60(3): 321-329.
[16] ZHOU C, VISWANATHAN S. Comparison of a new bootstrapping method with parametric approaches for safety stock determination in service parts inventory systems [J]. International Journal of Production Economics, 2011, 133(1): 481-485.
[17] ANDREA B, NICOLA S. Spare parts classification and demand forecasting for stock control: Investigating the gap between research and practice[J]. Omega, 2012, 40(1): 722-737.
[18] JOSE R, MARCO A M. Demand forecasting and inventory control: A simulation study on automotive spare parts[J]. International Journal of Production Economics, 2015, 161(1): 1-16.
[19] SCALA N M, RAJGOPAL J, NEEDY K L. Managing nuclear spare parts inventories: A data driven methodology[J]. IEEE Transactions on Engineering Management, 2014, 61(1): 28-37.
[20] WANG W, ARIS A S. Spare parts demand: Linking forecasting to equipment maintenance[J]. Transportation Research Part E, 2011, 47(1): 1194-1209.
[21] ALBRIGHT S C, GUPTA A. Steady-state approximation of a multi-echelon multi-indentured repairable-item inventory system with a single repair facility[J]. Naval Research Logistics, 1993, 40(1): 479-493.
[22] DHAKAR T, SCHMIDT C, MILLER D. Base stock level determination for higher cost low demand critical repairable spares[J]. Computers and Operational Research, 1994, 21(1): 411-420.
[23] KIM J, SHIN K, YU H. Optimal algorithm to determine the spare inventory level for a repairable-item inventory system[J]. Computers and Operational Research, 1996, 23(1): 289-297.
[24] KENNEDY W J, PATTERSON J W, FREDENDALL L D. An overview of recent literature on spare parts inventories[J]. International Journal of Production Economics, 2002, 76(1): 201-215.
[25] HANEVELD W K, TEUNTER R H. Optimal provisioning strtegies for slow moving spare parts with small lead times[J]. Journal of the Operational Research Society, 1997, 48(1): 184-194.
[26] HEGDE G G, KARMARKAR S U. Engineering costs and customer costs in designing product support[J]. Naval Research Logistics, 1993, 40(1): 415-423.
[27] GU J, ZHANG G Q, KEVIN W. Efficient aircraft spare parts inventory management under demand uncertainty[J]. Journal of Air Transport Management, 2015, 42(1): 101-109.
[28] 阮旻智, 李庆民, 张光宇. 多约束下舰船装备携行备件保障方案优化方法[J].兵工学报, 2013, 34(9): 1144-1149. RUAN M Z, LI Q M, ZHANG G Y. Optimization method of carrying spare parts support project for warship equipment under multi-constraints[J]. Acta ArmamentarII, 2013, 34(9): 1144-1149 (in Chinese).
[29] 徐立, 李庆民, 阮旻智. 具备有限维修能力的舰船编队保障方案优化[J]. 系统工程与电子技术, 2014, 36(11): 2226-2232. XU L, LI Q M, RUAN M Z. Support project optimization for warship formation with finite repair capacity[J]. Systems Engineering and Electronics, 2014, 36(11): 2226-2232 (in Chinese).
[30] ARMSTRONG M, ATKINS D. Joint optimization of maintenance and inventory policies for a simple system[J]. IIE Transactions, 1996, 28(5): 415-424.
[31] KABIR A B M, AHMED S A. A stocking policy for spare part provisioning under age based preventive replacement[J]. European Journal of Operational Research, 1996, 90(1): 171-181.
[32] FALKNER C H. Jointly optimal inventory and maintenance policies for stochastically failing equipment[J]. Operations Research, 1968, 16(3): 587-601.
[33] ACHARYA D, NAGABHUSHANAM G, ALAM S. Jointly optimal block-replacement and spare provisioning policy[J]. IEEE Transactions on Reliability, 1986, 35(4): 447-451.
[34] CHELBI A, AIT K D. Spare provisioning strategy for preventively replaced systems subjected to random failure[J]. International Journal of Production Economics, 2001, 74(1): 183-189.
[35] YOO Y K, KIM K J, SEO J. Optimal joint spare stocking and block replacement policy[J]. Journal of Advanced Manufacturing Technology, 2001, 18(12): 906-909.
[36] ALENKA B, ALENKA H. Joint optimization of block-replacement and periodic-review spare-provisioning policy[J]. IEEE Transactions on Reliability, 2003, 52(1): 112-117.
[37] HUANG R Q, MENG L L, XI L F, et al. Modeling and analyzing a joint optimization policy of block-replacement and spare inventory with random leadtime[J]. IEEE Transactions on Reliability, 2008, 57(1): 113-124.
[38] JIANG Y P, CHEN M Y, ZHOU D H. Joint optimization of preventive maintenance and inventory policies for multi-unit systems subject to deteriorating spare part inventory[J]. Journal of Manufacturing Systems, 2015, 35(1): 191-205.
[39] SOFIA P. Joint optimization of spare parts ordering and maintenance policies for multiple identical items subject to silent failures[J]. European Journal of Operational Research, 2014, 235(1): 300-314.
[40] ARMSTRONG M J, ATKINS D A. A note on joint optimization of maintenance and inventory[J]. IIE Transactions, 1998, 30(2): 143-149.
[41] HU R, YUE C, XIE J. Joint optimization of age replacement and spare ordering policy based on genetic algorithm[C]//Proceedings of the 2008 International Conference on Computational Intelligence and Security. Piscataway, NJ: IEEE Press, 2008:156-161.
[42] LYNCH P, ADENDORFF K, YADAVALLI K S S, et al. Optimal spares and preventive maintenance frequencies for constrained industrial systems[J]. Computers & Industrial Engineering, 2013, 65(1): 378-387.
[43] ASHOK P, JAMES B, GANESAN S. Condition based maintenance: A survey[J]. Journal of Quality in Maintenance Engineering, 2012, 18(4): 384-400.
[44] ELWANY A, GEBRAEEL N. Sensor-driven prognostic models for equipment replacement and spare parts inventory[J]. IIE Transations, 2008, 40(7): 629-639.
[45] XIE J, WANG H. Joint optimization of condition-Based Preventive Maintenance and spare ordering policy[C]//Proceedings of the 4th International Conference on Wireless Communications, Networking and Mobile Computing. Piscataway, NJ: IEEE Press, 2008: 1-5.
[46] WANG L, CHU J, MAO W. A condition-based order-replacement policy for a single-unit system[J]. Applies Mathematical Modelling, 2008, 32(11): 2274-2289.
[47] WANG L, CHU J, MAO W. An optimum condition-based replacement and spare provisioning policy based on Markov chains [J]. Journal of Quality in Maintenance Engineering, 2008, 14(4): 387-401.
[48] WANG L, CHU J, MAO W. A condition-based replacement and spare provisioning policy for deteriorating systems with uncertain deterioration to failure[J]. European Journal of Operational Research, 2009, 194(1): 184-205.
[49] ERIK T S B, SHARAREH T, DRAGAN B. Joint optimal inspection and inventory for a k-out-of-n system[J]. Reliability Engineering and System Safety, 2014, 131(1): 203-215.
[50] RAUSCH M, LI H T. Joint production and spare part inventory control stragety driven by condition based maintenance[J]. IEEE Transactions on Reliability, 2010, 59 (3): 507-516.
[51] DING S H, SHAHRUL K. Maintenance policy optimization-literature reivew and directions[J]. International Journal of Advanced manufacturing Technology, 2015, 76(1): 1263-1283.
[52] COBBAERT K, VAN O K. Inventory models for fast moving spare parts subject to sudden death obsolescence[J]. International Journal of Production Economics, 1996, 44(1): 239-248.
[53] LI Q, CLIFFORD G D. Signal quality and data fusion for false alarm reduction in the intensive care unit[J]. Journal of Electrocardiology, 2012, 45(6): 596-603.
[54] 卞洁辉, 郭霖瀚, 康锐, 等. 虚警影响下的备件库存优化[J]. 北京航空航天大学学报, 2014,40(3): 413-416. BIAN J H, GUO L H, KANG R, et al. Spares optimization under the influence of false alarm[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(3): 413-416 (in Chinese).
/
| 〈 |
|
〉 |
CJA