基于正负刚度并联的低频隔振器研究
收稿日期: 2015-07-23
修回日期: 2015-11-03
网络出版日期: 2015-11-23
基金资助
国家自然科学基金（11172225)
Study on a low frequency vibration isolator based on combined positive and negative stiffness
Received date: 2015-07-23
Revised date: 2015-11-03
Online published: 2015-11-23
Supported by
National Natural Science Foundation of China (11172225)
为了能够抑制微振动对在轨运行航天器造成的不利影响，提出了一种由螺旋柔性弹簧（SFS）与磁性弹簧并联构成的低频隔振器；其中，螺旋柔性弹簧作为正刚度元件为系统提供承载能力，并通过有限元建模对其轴向刚度特性进行了数值分析；由两两相吸、同轴配置的3块环形永磁体构成的磁性弹簧为该隔振系统沿轴向提供负刚度以降低系统的固有频率；基于等效电流模型分析讨论了该磁性弹簧的磁刚度特性，并在平衡位置附近对磁刚度作了线性近似。通过分析所设计的低频隔振器与其相应线性隔振系统的位移传递率，比较了2种隔振器的隔振性能。研究结果表明：所提出的低频隔振系统能够有效地隔离低频微幅振动，降低系统的固有频率，进而拓宽了隔振频带；同时，进一步改善了隔振系统在共振区域附近的阻尼特性，有效地降低了共振峰值。
董光旭 , 罗亚军 , 严博 , 张希农 . 基于正负刚度并联的低频隔振器研究[J]. 航空学报, 2016 , 37(7) : 2189 -2199 . DOI: 10.7527/S1000-6893.2015.0297
To suppress the adverse effects caused by micro-vibration on orbiting spacecraft, a novel low frequency vibration isolator which combines a spiral flexure spring (SFS) with a magnetic spring in parallel is developed; SFS is employed as a positive stiffness element to support the payload, and then the finite element model of SFS is adopted to analyze its axial stiffness. Moreover, the magnetic spring is fabricated by three coaxial magnetic rings that are arranged in attraction to provide negative stiffness for lowering the natural frequency of the isolator. The characteristic of magnetic stiffness is investigated based on the equivalent current model, and the linearization of magnetic stiffness near the equilibrium position is further obtained. The vibration isolation performance of the designed isolator and its corresponding linear system is compared through analysis of their displacement transmissibility. The results demonstrate that the designed low frequency vibration isolator can effectively isolate micro-vibration, lower the natural frequency of the isolator, and expand the bandwidth for vibration isolation. Additionally, the damping characteristic is improved near the resonance region, and the resonance peak is attenuated greatly.
[1] LIU C C, JING X J, DALEY S, et al. Recent advances in micro-vibration isolation[J]. Mechanical Systems and Signal Processig, 2015, 56-57:55-80.
[2] AGLIETTI G S, LANGLEY R S, ROGERS E, et al. Model building and verification for active control of micro-vibrations with probabilistic assessment of the effects of uncertainties[J]. Proceedings of the Institution of Mechanical Engineers-Part C, 2004, 218(4):389-399.
[3] 倪振华. 振动力学[M]. 西安:西安交通大学出版社,1989:108-111. NI Z H. Mechanical vibrations[M]. Xi'an:Xi'an Jiaotong University Press, 1989:108-111(in Chinese).
[4] 路纯红, 白鸿柏. 新型超低频非线性被动隔振系统的设计[J]. 振动与冲击, 2011, 30(1):234-236. LU C H, BAI H B. A new type nonlinear ultra-low frequency passive vibration isolation system[J]. Journal of Vibration and Shock, 2011, 30(1):234-236(in Chinese).
[5] 彭献, 黎大志. 准零刚度隔振器及其弹性特性设计[J]. 振动. 测试与诊断, 1997, 17(4):44-46. PENG X, LI D Z. Quasi-zero stiffness vibration isolators and design for their elastic characteristics[J]. Journal of Vibration, Measurement & Diagnosis, 1997, 17(4):44-46(in Chinese).
[6] 彭献, 陈树年, 宋福磐. 负刚度的工作原理及应用初探[J]. 湖南大学学报(自然科学版), 1992, 19(4):89-94. PENG X, CHEN S N, SONG F P. Research on theory of negative stiffness and its application[J]. Journal of Hunan University (Natural Sciences), 1992, 19(4):89-94(in Chinese).
[7] 彭献, 唐驾时. 非线性隔振理论初探[J]. 振动与冲击, 1996, 15(4):13-17. PENG X, TANG J S. Research on the theory of nonlinear vibration isolation[J]. Journal of Vibration and Shock, 1996, 15(4):13-17(in Chinese).
[8] CARRELLA A, BRENNAN M J, KOVACIC I, et al. On the force transmissibility of a vibration isolator with quasi-zero-stiffness[J]. Journal of Sound and Vibration, 2009, 322(4):707-717.
[9] 刘兴天, 孙靖雅, 肖锋, 等. 准零刚度微振动隔振器的原理和性能研究[J]. 振动与冲击, 2013, 32(21):69-73. LIU X T, SUN J Y, XIAO F, et al. Principle and performance of a quasi-zero stiffness isolator for micro-vibration isolation[J]. Journal of Vibration and Shock, 2013, 32(21):69-73(in Chinese).
[10] 徐道临, 成传望, 周加喜. 屈曲板型准零刚度隔振器的设计和特性分析[J]. 湖南大学学报(自然科学版), 2014, 41(8):17-22. XU D L, CHENG C W, ZHOU J X. Design and characteristic analysis of a bucking plate vibration isolator with quasi-zero-stiffness[J]. Journal of Hunan University (Natural Sciences), 2014, 41(8):17-22(in Chinese).
[11] CARRELLA A, BRENNAN M J, WATERS T P, et al. On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets[J]. Journal of Sound and Vibration, 2008, 315(3):712-720.
[12] WU W J, CHEN X D, SHAN Y H. Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness[J]. Journal of Sound and Vibration, 2014, 333(13):2958-2970.
[13] 冯慈璋, 马西奎, 工程电磁场导论[M]. 北京:高等教育出版社, 2000:92-93. FENG C Z, MA X K. Introduction to electromagnetic field[M]. Beijing:Higher Education Press, 2000:92-93(in Chinese).
[14] FURLANI E P. Permanent magnet and electromechanical devices:Materials, analysis, and applications[M]. Salt Lake City, UT:Academic Press, 2001:126-128.
[15] 聂帅, 王文瑞, 张佳明. 斯特林制冷机渐开线型中涡旋柔性弹簧强度研究[J]. 低温工程, 2014(3):62-66. NIE S, WANG W R, ZHANG J M. Strength study on spiral flexure spring based involute curve of stirling crycooler[J]. Cryogenics, 2014(3):62-66(in Chinese).
[16] 袁重雨, 陈曦, 刘颖, 等. 三种不同型线柔性弹簧的有限元分析及对比研究[J]. 低温与超导, 2011, 39(7):21-24. YUAN C Y, CHEN X, LIU Y, et al. Finite element analysis of three molded lines of flexure spring[J]. Cryogenics & Superconductivity, 2011, 39(7):21-24(in Chinese).
/
| 〈 |
|
〉 |
CJA