优化驱动的起落架结构设计方法
收稿日期: 2014-04-02
修回日期: 2014-07-16
网络出版日期: 2015-03-31
基金资助
国家自然科学基金 (51305198); 高等学校博士学科点专项科研基金(20123218120003)
Optimization-driven design method of landing gear structure
Received date: 2014-04-02
Revised date: 2014-07-16
Online published: 2015-03-31
Supported by
National Natural Science Foundation of China (51305198); Specialized Research Fund for the Doctoral Program of Higher Education of China (20123218120003)
起落架结构是飞机上最复杂最重要的结构之一,传统的设计方法依靠人工经验反复迭代,没有充分利用结构优化技术,具有设计周期长且不能最大限度得到最优设计的缺点。根据结构优化技术的发展,提出了优化驱动的起落架结构设计方法,实现了优化驱动的设计方法在起落架领域的完整工程应用。结构优化技术作为整个设计流程的驱动者,在其中发挥贯穿全程的主体作用,根据不同设计阶段的需求,先后运用拓扑优化、尺寸优化和形状优化技术。以某型飞机前起落架外筒的设计为例可以发现,相比传统设计方法,新方法在相同的设计约束条件下,能更快得到设计方案,结构质量减少了24.1%,实现了起落架结构的快速设计和轻量化设计。
张明 , 刘文斌 , 李闯 , 聂宏 . 优化驱动的起落架结构设计方法[J]. 航空学报, 2015 , 36(3) : 857 -864 . DOI: 10.7527/S1000-6893.2014.0163
Landing gear structure is one of the most complex and important structures in aircraft. The traditional method for aircraft landing gear design is an iterative process relied on the experience of human, which does not take advantage of the important structural optimization technology, so the design cycles still seem long and the outcome is seldom the best. In this paper, optimization-driven design method of landing gear structural is proposed based on the development history of structural design process. This is the first application of the optimization-driven method in landing gear structural design. As a driver, optimization technology plays a main role throughout the entire design process. Topology optimization, size optimization and shape optimization are applied to the method according to different demands. Taking a certain type of landing gear cylinder design for example, both the current method and optimization-driven method are used for comparison. The results show that the new method reduces the weight of the strut cylinder by 24.1%, improves the efficiency and performance of the landing gear structural design and also achieves a rapid and lightweight design.
[1] Gao Z J, Huang Z W. Aircraft design manual 14th Volume: takeoff and landing system design[J]. Beijing: Aviation Industry Press, 2002: 1 (in Chinese). 高泽迥, 黄振威. 飞机设计手册第14分册: 起飞着陆系统设计[J]. 北京: 航空工业出版社, 2002: 1.
[2] Chai S T, Mason W H. Landing gear integration in aircraft conceptual design[D]. Blacksburg,VA: Virginia Polytechnic Institute and State University, 1996.
[3] Nguyen T, Schonning A, Eason P, et al. Methods for analyzing nose gear during landing using structural finite element analysis[J]. Journal of Aircraft, 2012, 49(1): 275-280.
[4] Tao J X, Smith S, Duff A. The effect of overloading sequences on landing gear fatigue damage[J]. International Journal of Fatigue, 2009, 31(11): 1837-1847.
[5] Wu X H, Hong Q Q. Optimization techniques applied to the design of the Boeing 787[J]. Aeronautical Manufacturing Technology, 2008(14): 51-52 (in Chinese). 邬旭辉, 洪清泉. 优化技术在波音787设计中的应用[J].航空制造技术, 2008(14): 51-52.
[6] Tylor R M, Thomas J E, Mackaron N G, et al. Detail part optimization on the F-35 joint strike fighter, AIAA-2006-1868[R]. Reston: AIAA, 2006.
[7] Li L, Xue Z. Internal structure of three-dimensional hollow blade with equal strength[J]. Journal of Aerospace Power, 2012, 27(10): 2329-2333 (in Chinese). 李琳, 薛铮. 等强度三维空心叶片的内部拓扑结构[J]. 航空动力学报, 2012, 27(10): 2329-2333.
[8] Xu S Q, Xia R W. Methods of structural optimization: an overview[J]. Acta Aeronautica et Astronautica Sinica, 1995, 16(4): 385-396 (in Chinese). 许素强, 夏人伟. 结构优化方法研究综述[J]. 航空学报, 1995, 16(4): 385-396.
[9] Saitou K, Izui K, Nishiwaki S, et al. A survey of structural optimization in mechanical product development[J]. Journal of Computing and Information Science in Engineering, 2005, 5(3): 214-226.
[10] Cervellera P, Zhou M, Schramm U. Optimization driven design of shell structures under stiffness, strength and stability requirements[C]//6th World Congresses of Structural and Multidisciplinary Optimization, 2005.
[11] Schuhmacher G, Stettner M, Zotemantel R, et al. Optimization assisted structural design of a new military transport aircraft, AIAA-2004-4641[R]. Reston: AIAA, 2004.
[12] Tcherniak D. Topology optimization of resonating structures using SIMP method[J]. International Journal for Numerical Methods in Engineering, 2002, 54(11): 1605-1622.
[13] Liang X P, Wang H. Structural optimization design based on FEM: principles and engineering applications[M]. Beijing: Tsinghua University Press, 2010: 9-12 (in Chinese). 梁醒培, 王辉. 基于有限元法的结构优化设计:原理与工程应用[M]. 北京: 清华大学出版社, 2010: 9-12.
[14] Fleury C. CONLIN: an efficient dual optimizer based on convex approximation concepts[J]. Structural Optimization, 1989, 1(2): 81-89.
[15] Rietz A. Sufficiency of a finite exponent in SIMP (power law) method[J]. Structural and Multidiscipline Optimization, 2011, 21(2): 159-163.
[16] Wang W, Yang W, Chang N. Integration shape and sizing optimization of composite wing structure based on response surface method[J]. Transactions of Nanjing University of Aeronautics & Astronautics, 2008, 25(2): 94-100.
/
〈 | 〉 |