材料工程与机械制造

复杂外形航空发动机TC4钛合金宽弦空心风扇叶片弯扭成形

  • 吴心晨 ,
  • 陈明和 ,
  • 谢兰生 ,
  • 张铁磊 ,
  • 胡智华
展开
  • 1. 南京航空航天大学 机电学院, 南京 210016;
    2. 先进航空发动机协同创新中心, 北京 100191;
    3. 无锡透平叶片有限公司 国家能源大型涡轮叶片研发中心, 无锡 214174
吴心晨 男,硕士研究生。主要研究方向:钛合金超塑成形/扩散连接。 E-mail: nuaawxc@qq.com;陈明和 男,博士,教授,博士生导师。主要研究方向:钛合金及难成形技术、材料成形性能分析与评价、板料成形CAE、集成计算材料工程(ICME)、材料超塑性及成形/扩散连接、飞机(飞行器)钣金精密制造及抗疲劳制造。 Tel: 025-84892508 E-mail: meemhchen@nuaa.edu.cn

收稿日期: 2014-07-07

  修回日期: 2014-09-01

  网络出版日期: 2014-10-08

基金资助

江苏省科技支撑计划(BE2013123)

Twist-bend forming of aeroengine titanium TC4 wide-chord hollow fan blade with complex geometries

  • WU Xinchen ,
  • CHEN Minghe ,
  • XIE Lansheng ,
  • ZHANG Tielei ,
  • HU Zhihua
Expand
  • 1. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
    2. Collaborative Innovation Center for Advanced Aero-Engine, Beijing 100191, China;
    3. State Energy Research and Development Center of Large Turbine Blades, Wuxi Turbine Blade Co., Ltd., Wuxi 214174, China

Received date: 2014-07-07

  Revised date: 2014-09-01

  Online published: 2014-10-08

Supported by

Jiangsu Provincial Science and Technology Support Program (BE2013123)

摘要

弯扭成形是钛合金空心风扇叶片制造中一种有效的辅助成形手段,赋予空心叶片毛坯理想的过渡形状,改善工艺性。针对应用于大涵道比涡扇发动机的TC4钛合金宽弦空心风扇叶片的工艺试验件,研究适用于复杂外形叶片的单轴扭转与双轴扭转两种弯扭方法,提出了夹头运动参数的设计方法,分析了机构的运动规律以及成形原理。基于有限元模拟,研究了扭转方式以及弯扭路径等关键工艺参数对于制件外形、变形区分布、扭转力矩以及表面缺陷的影响,并进行了弯扭实验。结果表明,采用单轴扭转方式,弯扭温度为750 ℃,叶尖夹头扭角为20.4°,扭转速度为0.68 (°)/min,能够将平板毛坯成形出合理的过渡形状。弯扭后面板上出现了失稳凹陷,与有限元结果一致。

本文引用格式

吴心晨 , 陈明和 , 谢兰生 , 张铁磊 , 胡智华 . 复杂外形航空发动机TC4钛合金宽弦空心风扇叶片弯扭成形[J]. 航空学报, 2015 , 36(6) : 2055 -2063 . DOI: 10.7527/S1000-6893.2014.0271

Abstract

Twist-bend forming is considered as an effective auxiliary forming means for titanium wide-chord hollow fan blades. It is used to form the hollow blank to the preferred in-process shape, which improves the manufacturability. For the process test sample of certain type of TC4 titanium wide-chord hollow fan blades used in high bypass ratio turbofan engines, a single-axis and a double-axis twist-bend forming approaches are proposed. The design method for the motion parameters is developed based on the analysis of forming principle and clamps movement rules. Numerical method is used to investigate the effects of different twist-bend manners and load paths on the result, such as obtained geometries, deformation distribution, required torque and skin deflections. The forming experiment is conducted. The results show that the single-axis manner can obtain satisfactory result using the following process parameters: 750 ℃ for forming temperature, 20.4° for twist angle of top clamp and 0.68 (°)/min for twisting velocity. Grooves do appear on the blade skin as the FE analysis predicts.

参考文献

[1] Hou G Q. The development of the wide-chord hollow fan blade manufacturing process[J]. Aviation Engineering & Maintenance, 1994(5): 6-8 (in Chinese). 侯冠群. 宽弦空心风扇叶片制造工艺的发展[J]. 航空制造工程, 1994(5): 6-8.
[2] Liang C H. Overview of advanced fan and compressor blade/vane in high performance aeroengine[J]. Aeroengine, 2006, 32(3): 48-52 (in Chinese). 梁春华. 高性能航空发动机先进风扇和压气机叶片综述[J]. 航空发动机, 2006, 32(3): 48-52.
[3] Liu J F. Fan blade of turbofan and its forming technology[J]. Aeronautical Manufacturing Technology, 1999(2): 21-22 (in Chinese). 刘家富. 涡扇发动机风扇叶片及其成形工艺[J]. 航空工艺技术, 1999(2): 21-22.
[4] Zhao B, Li Z Q, Hou H L, et al. Three dimensional FEM simulation of titanium hollow blade forming process[J]. Rare Metal Materials and Engineering, 2010, 39(6): 963-968.
[5] Xun Y W, Tan M J. Applications of superplastic forming and diffusion bonding to hollow engine blades[J]. Journal of Materials Processing Technology, 2000, 99(1): 80-85.
[6] Gao Q F. Research and application of numerical simulation of superplastic forming hollow fan blades[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008 (in Chinese). 高庆峰. 宽弦空心风扇叶片超塑成形的数值仿真研究[D]. 南京: 南京航空航天大学, 2008.
[7] Ding J G, Hu J, Cai X X. Design and core and bypass numerical simulation of a compound swept fan[J]. Journal of Aerospace Power, 2009, 24(3): 626-633 (in Chinese). 丁建国, 胡骏, 蔡显新. 某复合掠形风扇设计与内外函数值模拟研究[J]. 航空动力学报, 2009, 24(3): 626-633.
[8] Chen M Z, Liu B J, Fan/compressor aero design technology for high bypass ratio turbofan[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3): 513-526 (in Chinese). 陈懋章, 刘宝杰. 大涵道比涡扇发动机风扇/压气机气动设计技术分析[J]. 航空学报, 2008, 29(3): 513-526.
[9] Lv Y M, Shao R, Teng S X. Design of turbine blade forging die based on numerical simulation[J]. Hot Working Technology, 2011, 40(21): 194-199 (in Chinese). 吕彦明, 邵燃, 滕树新. 基于数值模拟的汽轮机叶片锻模设计[J]. 热加工工艺, 2011, 40(21): 194-199.
[10] Xu Z G. Key manufacture technologies of high-bypass ratio turbofan aeroengine[J]. Aeronautical Manufacturing Technology, 2009(2): 44-47 (in Chinese). 徐志刚. 高涵道比涡扇发动机的关键制造技术[J]. 航空制造技术, 2009(2): 44-47.
[11] Zheng W W, Wu K J. Theory of machines and mechanisms [M]. 7th ed. Beijing: Higher Education Press, 1996: 88-92 (in Chinese). 郑文纬, 吴克坚. 机械原理[M]. 7版. 北京: 高等教育出版社, 1996: 88-92.
[12] Li Y Q, Lin Z R, Chen C K, et al. Titanium metal forming technology[M]. Beijing: National Defense Industry Press, 1986: 54-58 (in Chinese). 理有亲, 林兆荣, 陈春奎, 等. 钛板冲压成形技术[M]. 北京: 国防工业出版社, 1986: 54-58.
[13] Cai Y. Research on superplastic tensile mechanical properties and microstructural evolution of TC4 titanium alloy at high temperature[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2009 (in Chinese). 蔡云. TC4 钛合金高温拉伸力学性能研究和组织演变[D]. 南京: 南京航空航天大学, 2009.
[14] Lin Z R, Xiong Z Q. Short-term stress relaxation of the sheet TA2、TC1、TC4 in high temperature[J]. Rare Metal Materials and Engineering, 1983(6): 1-7 (in Chinese). 林兆荣, 熊志卿. TA2、TC1、TC4钛板高温短时应力松弛的研究[J]. 稀有金属材料与工程, 1983(6): 1-7.
[15] Liu Y, Yin Z D, Zhu J C. Effects of temperature, stress and grain size on stress relaxation in the alloy TC4[J]. Rare Metal Materials and Engineering, 2003, 32(8): 643-646 (in Chinese). 刘勇, 尹钟大, 朱景川. 温度、应力及晶粒度对TC4合金应力松弛性能的影响[J]. 稀有金属材料与工程, 2003, 32(8): 643-646.
[16] Zhou K, Wang Z W, Shi Z B, et al. Research on oxidation behavior of 2520 stainless steel at high temperature[J]. Engineering Journal of Wuhan University, 2011, 44(6): 783-786 (in Chinese). 周奎, 王志武, 石振斌, 等. 2520不锈钢的高温氧化行为研究[J]. 武汉大学学报(工学版), 2011, 44(6), 783-786.
[17] Hu S G, Chen H Z, Li D S, et al. Engineering analysis of sheet metal forming[M]. Beijing: Beihang University Press, 2009: 182-185 (in Chinese). 胡世光, 陈鹤峥, 李东升, 等. 钣料冷压成形的工程解析[M]. 北京: 北京航空航天大学出版社, 2009: 182-185.

文章导航

/