马保全 , 周正干 . 航空航天复合材料结构非接触无损检测技术的进展及发展趋势[J]. 航空学报, 2014 , 35(7) : 1787 -1803 . DOI: 10.7527/S1000-6893.2013.0490

[1] Chen S J. Composite technology and large aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3): 605-610. (in Chinese) 陈绍杰. 复合材料技术与大型飞机[J]. 航空学报, 2008, 29(3): 605-610.

[2] Balaskó M, Sváb E, Molnár G, et al. Classification of defects in honeycomb composite structure of helicopter rotor blades[J]. Nuclear Instruments & Methods in Physics Research Section A, 2005, 542(1-3): 45-51.

[3] Liang H L, Qiu H P, Chen J, et al. Manufacturing technique of orthogonal banding foraluminum honeycomb sandwich structure[J]. Manufacturing Technologies, 2009 (Sup.): 30-32. (in Chinese) 梁恒亮, 邱海鹏, 陈静, 等. 铝蜂窝夹层板正交结构件的制造方法[J]. 航空制造技术, 2009(增刊): 30-32.

[4] Zhang L T, Cheng L F, Xu Y D. Progress in research work of new CM-SiC[J]. Aeronautical Manufacturing Technology, 2003(1): 24-32. (in Chinese) 张立同, 成来飞, 徐永东. 新型碳化硅陶瓷基复合材料的研究进展[J]. 航空制造技术, 2003(1): 24-32.

[5] Deng X D, Cheng L F, Mei H, et al. Infrared thermal wave imaging for nondestructive detection and measurement of the C/SiC composites[J]. Acta materiae Composite Sinica, 2009, 26(5): 112-119. (in Chinese) 邓晓东, 成来飞, 梅辉, 等. C/SiC复合材料的定量红外热波无损检测[J]. 复合材料学报, 2009, 26(5): 112-119.

[6] Zhang J T, Lu H N. Double mode detection of multilayer bonded structure for solid rocket motors[J]. Journal of Solid Rocket Technology, 2003, 26(4): 79-82. (in Chinese) 张吉堂, 路宏年. 火箭发动机多层粘接结构的双模式检测[J]. 固体火箭技术, 2003, 26(4): 79-82.

[7] Abou-Khousa M A, Ryley A, Kharkovsky S, et al. Comparison of X-ray, millimeter wave, shearography and through-transmission ultrasonic methods for inspection of honeycomb composites[J]. Review of Progress in Quantitative Nondestructive Evaluation, 2007, 894(26): 999-1006.

[8] Palmer S B, Dixon S. Industrially viable non-contact ultrasound[J]. Insight, 2003, 45(3): 211-217.

[9] Zhou Z G, Wei D. Progress of air-coupled ultrasonic non-destructive testing technology[J]. Chinese Journal of Mechanical Engineering, 2008, 44(6): 10-14. (in Chinese) 周正干, 魏东. 空气耦合式超声波无损检测技术的发展[J]. 机械工程学报, 2008, 44(6): 10-14.

[10] Kelly S P, Hayward G, Alvarez-Arenas T E G. Characterization and assessment of an integrated matching layer for air-coupled ultrasonic applications[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2004, 51(10): 1314-1323.

[11] Blomme E, Bulcaen D, Declercq F. Air-coupled ultrasonic NDE: experiments in the frequency range 750 kHz-2 MHz [J]. NDT&E International, 2002, 35(7): 417-426.

[12] Chimenti D E, Song J. Performance of spherically focused air-coupled ultrasonic transducers[J]. AIP Conference Proceedings, 2007, 894(1): 862-869.

[13] Yanez Y, Garcia-Hernandez M J, Salazar J, et al. Designing amplifiers with very low output noise for high impedance piezoelectric transducers[J]. NDT&E International, 2005, 38(6): 491-496.

[14] Turo A, Salazar J, Chavez J A, et al. Ultra-low noise front-end electronics for air-coupled ultrasonic non-destructive evaluation[J]. NDT&E International, 2003, 36(2): 93-100.

[15] Stonawski O. Non-destructive evaluation of carbon/carbon brakes using air-coupled ultrasonic inspection systems. Carbondale: Department of Mechanical Engineering and Energy Processes, Southern Illinois University, 2009.

[16] Kays R, Mazeika L, Zukauskas E. Investigation of accurate imaging of the defects in composite materials using ultrasonic air-coupled technique[J]. International Journal of Materials & Product Technology, 2011, 41(1): 105-116.

[17] Bar H N, Dayal V, Barnard D, et al. Plate wave resonance with air-coupled ultrasonics[J]. Review of Progress in Quantitative Nondestructive Evaluation, 2010, 1211(29): 1069-1076.

[18] Sasaki K, Tsuritani H, Tsukamoto Y, et al. Air-coupled ultrasonic time-of-flight measurement system using amplitude-modulated and phase inverted driving signal for accurate distance measurements[J]. IEICE Electronics Express, 2009, 6(21): 1516-1521.

[19] Zhou Z G, Wei D, Xiang S. Application of linear-frequency-modulation based pulse compression in air-coupled ultrasonic testing[J]. Chinese Journal of Mechanical Engineering, 2010, 46(18): 24-28. (in Chinese) 周正干, 魏东, 向上. 线性调频脉冲压缩方法在空气耦合超声检测中的应用研究[J]. 机械工程学报, 2010, 46(18): 24-28.

[20] McIntyre C S, Hutchins D A, Billson D R, et al. The use of air-coupled ultrasound to test paper[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2001, 48(3): 717-727.

[21] Bhardwaj M C. High frequency non-contact ultrasonic analysis: A practical reality//ASNT Fall Conference and Quality Testing Show Paper Summaries. Arizona: American Society for Nondestructive Testing, 1999: 83-85.

[22] Imieliniska K, Castaings M, Wojtyra R, et al. Air-coupled ultrasonic C-scan technique in impact response testing of carbon fibre and hybrid: glass, carbon and Kevlar/epoxy composites[J]. Journal of Materials Processing Technology, 2004, 157-158: 513-522.

[23] Peters J J, Barnard D J, Hsu D K. Development of a fieldable air-coupled ultrasonic inspection system[J]. Review of Progress in Quantitative Nondestructive Evaluation, 2004, 23(23): 1368-1375.

[24] Hillger W, Meier R, Henrich R. Inspection of CFRP components by ultrasonic imaging with air-coupling[J]. Insight, 2004, 46(3): 147-150.

[25] Dai J M, Wang Z J. Infrared thermography non-destructive testing technology and its application[J]. Techniques of Automation and Applications, 2007, 26(1): 1-7. (in Chinese) 戴景民, 汪子君. 红外热成像无损检测技术及其应用现状[J]. 自动化技术与应用, 2007, 26(1): 1-7.

[26] Deng S P, Zheng H P, Jiang Z H, et al. Application of infrared thermography in composites inspection//Shaanxi 11th Anniversary Conference on Non-destructive Testing. Shaanxi: Shaanxi Mechanical Engineering Society, 2008: 85-98. (in Chinese) 邓淑萍, 郑海平, 姜照汉. 红外热波无损检测技术在复合材料检测方面的应用//陕西省第十一届无损检测年会论文集. 陕西: 陕西省机械工程学会, 2008: 85-98.

[27] Avdelidis N P, Saarimaki E, Kauppinen T, et al. LWIR and MWIR thermography tools for composites assessment[J]. SPIE, 2010, 7661: 76610-76611.

[28] Li Z L. Study of infrared thermography nondestructive testing lockin technique. Harbin: Department of Automatic Test and Control, Harbin Institute of Technology, 2007. (in Chinese) 李振龙. 红外热波无损检测锁相技术研究. 哈尔滨: 哈尔滨工业大学仪器科学与技术学院, 2007.

[29] Mulaveesala R, Pal P, Tuli S. Interface study of bonded wafers by digitized linear frequency modulated thermal wave imaging[J]. Sensors and Actuators A: Physical, 2006, 128(1): 209-216.

[30] Holland S D, Uhl C, Renshaw J. Vibrothermographic crack heating: a function of vibration and crack size[J]. Review of Progress in Quantitative Nondestructive Evaluation, 2009, 1096(1): 489-494.

[31] Tsopelas N, Siakavellas N J. Improvements in electromagnetic-thermal non-destructive inspection by data processing[J]. NDT&E International, 2009, 42(5): 477-486.

[32] Tian Y P. Research on key technologies of infrared thermography. Nanjing: College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, 2009. (in Chinese) 田裕鹏. 红外辐射成像无损检测关键技术研究. 南京: 南京航空航天大学自动化学院, 2009.

[33] Zalameda J N, Winfree W P, Yost W T. Air coupled acoustic thermography (ACAT) Inspection technique[J]. AIP Conference Proceedings, 2008, 975(1): 467-474.

[34] Swiderski W. Nondestructive testing of honeycomb type composites by an infrared thermography method//CD-Proceedings IV Conference. Buenos Aires: The Pan-American Committee of Nondestructive Testing, 2007: 1-12.

[35] Li H J, Huo Y, Cai L X, et al. Honeycomb structures using different optical testing methods[J]. Laser & Optoelectronics Progress, 2010(11): 89-94. (in Chinese) 李慧娟, 霍雁, 蔡良续, 等. 不同光学方法对蜂窝结构中脱粘缺陷检测[J]. 激光与光电子学进展, 2010(11): 89-94.

[36] Wang X, Jin W P, Zhang C L, et al. Actuality & evolvement of infrared thermal wave nondestructive imaging technology[J]. Nondestructive Testing, 2004, 26(10): 497-501. 王迅, 金万平, 张存林, 等. 红外热波无损检测技术及其进展[J]. 无损检测, 2004, 26(10): 497-501.

[37] Chen D P. Experimental studies on the application of ultrasonic pulse thermography and ultrasonic burst phase thermography in NDT. Beijing: College of Information Engineering, Capital Normal University, 2009. (in Chinese) 陈大鹏. 超声脉冲及超声脉冲相位热像技术用于无损检测的实验研究. 北京: 首都师范大学信息工程学院, 2009.

[38] Guo X W, Li R S, Ding M M. Simulating modulated thermography of cladding debond in solid rockets[J]. Journal of Mechanical Engineering, 2011, 47(2): 9-15. (in Chinese) 郭兴旺, 李苒笙, 丁蒙蒙. 固体火箭包覆层脱粘调制红外热波检测法的数值模拟[J]. 机械工程学报, 2011, 47(2): 9-15.

[39] Zhou K Y, Tian Y P, Yao E T, et al. Method for recognizing type of flaw in honeycomb. parts[J]. Journal of Data Acquisition and Processing, 2004, 19(1): 115-118. (in Chinese) 周克印, 田裕鹏, 姚恩涛, 等. 蜂窝结构缺陷类型识别的研究[J]. 数据采集与处理, 2004, 19(1): 115-118.

[40] Liu Y T, Guo G P, Yang D G, et al. Pulsed thermography of composite components used in aerospace applications[J]. Journal of Aeronautical Materials, 2012, 32(1): 72-77. (in Chinese) 刘颖韬, 郭广平, 杨党纲, 等. 脉冲热像法在航空复合材料构件无损检测中的应用[J]. 航空材料学报, 2012, 32(1): 72-77.

[41] Guo X W, Ding M M. Simulation of thermal NDT of thickness and its uneveness of thermal barrier coatings[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(1): 198-203. (in Chinese) 郭兴旺, 丁蒙蒙. 热障涂层厚度及厚度不均热无损检测的数值模拟[J]. 航空学报, 2010, 31(1): 198-203.

[42] Mattei C, Adler L. Leaky wave detection at air-solid interfaces by laser interferometry[J]. Ultrasonics, 2000, 38(1-8): 570-574.

[43] Leong W H, Staszewski W J, Lee B C, et al. Structural health monitoring using scanning laser vibrometry: Ⅲ. Lamb waves for fatigue crack detection[J]. Smart Materials & Structures, 2005, 14(6): 1387-1395.

[44] Wang Y M, Kang Y H, Wu X J. Application of ultrasonic guided wave nondestructive testing of pipes[J]. Journal of Naval University of Engineering, 2005, 17(5): 34-37. (in Chinese) 王悦民, 康宜华, 武新军. 管道超声导波无损检测技术应用研究[J]. 海军工程大学学报, 2005, 17(5): 34-37.

[45] Kenderian S, Cerniglia D, Djordjevic B B, et al. Laser-air hybrid ultrasonic technique for dynamic railroad inspection applications[J]. Insight, 2005, 47(6): 336-340.

[46] Green R E. Non-contact ultrasonic techniques[J]. Ultrasonics, 2004, 42(1-9): 9-16.

[47] Hutchins D A, Wright W M D, Hayward G, et al. Air-coupled piezoelectric detection of laser-generated ultrasound[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 1994, 41(6): 796-805.

[48] Toledo A R, Soler J S, Domínguez J A C, et al. Guided wave sensing in a carbon steel pipe using a laser vibrometer system//The 9th International Conference on Vibration Measurement by Laser and Noncontact Techniques and Short Course. Ancona: American Institute of Physics, 2010: 155-163.

[49] He C F. Laser ultrasonic techniques and applications. Beijing: School of Aerospace, Tsinghua University, 1995.(in Chinese) 何存富. 激光超声技术及其应用研究. 北京: 清华大学航天航空学院, 1995.

[50] Shi L. Laser inspection for composite parts[J]. Aviation Maintenance and Engineering, 2002(2): 37-38. (in Chinese) 石林. 复合材料构件的激光超声检验[J]. 航空工程与维修, 2002(2): 37-38.

[51] Zhou Z G, Sun G K, Li Z, et al. Application of laser ultrasonic testing technique on the detection of composite structures[J]. Journal of Harbin University of Science and Technology, 2012, 17(6): 119-122. (in Chinese) 周正干, 孙广开, 李征, 等. 激光超声检测技术在复合材料检测中的应用[J]. 哈尔滨理工大学学报, 2012, 17(6): 119-122.

[52] Jiang Y J. Speckle metrology for testing of composite material. Nanjing: College of Civil Engineering, Southeast University, 2006. (in Chinese) 姜益军. 散斑检测技术在复合材料测试中的应用研究. 南京: 东南大学土木工程学院, 2006.

[53] Luan X, Liang J, Cheng J, et al. ESSPI non-destructive testing of honeycomb sandwich panel for bonding defects[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(6): 775-778. (in Chinese) 栾旭, 梁军, 程靳, 等. 蜂窝夹芯板缺陷的ESSPI无损检测[J]. 北京航空航天大学学报, 2009, 35(6): 775-778.

[54] Gerhard H, Busse G. Two new techniques to improve interferometric deformation-measurement: lockin and ultrasound excited speckle-interferometry//Proceedings of Fringe 2005. 2005: 530-538.

[55] Liu L, Meng G. The application status of electronic speckle pattern interferometric nondestructive testing[J]. Nondestructive Testing, 2006, 28(1): 28-30. (in Chinese) 刘龙, 孟光. 电子散斑干涉无损检测技术的应用现状[J]. 无损检测, 2006, 28(1): 28-30.

[56] Kumar R, Singh S K, Shakher C. Wavelet filtering applied to time-average digital speckle pattern interferometry fringes[J]. Optics & Laser Technology, 2001, 33(8): 567-571.

[57] Findeis D, Gryzagoridis J, Matlali M. Phase stepping shearography and electronic speckle pattern interferometry[J]. Materials Evaluation, 2006, 64(10): 1020-1025.

[58] Hatta H, Aly-Hassan M S, Hatsukade Y, et al. Damage detection of C/C composites using ESPI and SQUID techniques[J]. Composites Science and Technology, 2005, 65(7-8): 1098-1106.

[59] Farge L, Varna J, Ayadi Z. Damage characterization of a cross-ply carbon fiber/epoxy laminate by an optical measurement of the displacement field[J]. Composites Science and Technology, 2010, 70(1): 94-101.

[60] Ambu R, Aymerich F, Ginesu F, et al. Assessment of NDT interferometric techniques for impact damage detection in composite laminates[J]. Composites Science and Technology, 2006, 66(2): 199-205.

[61] Wan M, Wang H T, Jiang Z F, et al. The research and application of ESPI technology on honeycomb structural materials[J]. Journal of Nanchang Hangkong University:Natural Sciences, 2007, 21(Sup.): 249-252. (in Chinese) 万敏, 王海涛, 姜兆芳, 等. 电子散斑干涉技术在蒙皮蜂窝结构材料的无损检测应用研究[J]. 南昌航空大学学报:自然科学版, 2007, 21(增刊): 249-252.

[62] Wang Y L. Electonic speckle pattern interferometer and laser shearography thchnique[J]. Nondestructive Testing, 2003, 25(2): 96-98. (in Chinese) 王幼玲. 激光错位散斑干涉测量系统[J]. 无损检测, 2003, 25(2): 96-98.

[63] Xiao Y S, Zeng Q L, Ma T J. Development and application of new nondestructive laser speckle instrument for tire testing[J]. Nondestructive Inspection, 2012, 36(1): 19-22. (in Chinese) 肖玉霜, 曾启林, 马铁军, 等. 新型激光散斑轮胎无损检测仪开发及应用[J]. 无损探伤, 2012, 36(1): 19-22.

[64] Zhang J, Geng R S. Studies on filed-applicable shearography NDT of airplane composites[J]. Nondestructive Testing, 2007, 29(7): 378-381. (in Chinese) 张坚, 耿荣生. 复合材料的现场电子剪切散斑检测技术研究[J]. 无损检测, 2007, 29(7): 378-381.

[65] Pei C X, Fukuchi T, Zhu H, et al. A study of internal defect testing with the laser-EMAT ultrasonic method[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2012, 59(12): 2702-2708.

[66] Zhang S Y. Laser acoustic and its application in materials inspecion[J]. Appiled Acoustics, 1992, 11(4): 1-6. (in Chinese) 张淑仪. 激光超声与材料无损评价[J]. 应用声学, 1992, 11(4): 1-6.

[67] Tsopelas N, Siakavellas N. Experimental evaluation of electromagnetic-thermal non-destructive inspection by eddy current thermography in square aluminum plates[J]. NDT&E International, 2011, 44(7): 609-620.

[68] Zhou Z G, Huang F Y, Yu F F. Testing method combing EMAT with eddy current[J]. Nondestructive Testing, 2009, 31(9): 706-710. (in Chinese) 周正干, 黄凤英, 于芳芳. 电磁超声和涡流组合检测方法[J]. 无损检测, 2009, 31(9): 706-710.

[69] Zhou Z G, Huang F Y, Lin J M. Analysis on the relationship between EMAT transmitting efficiency and the electrical conductivity of the coating on material surface[J]. International Journal of Applied Electromagnetics and Mechanics, 2010, 33(3-4): 1245-1252.

[70] Urayama R, Uchimoto T, Takagi T. Application of EMAT/EC dual probe to monitoring of wall thinning in high temperature environment[J]. International Journal of Applied Electromagnetics and Mechanics, 2010, 33(3-4): 1317-1327.

[71] Miller M, Mi B, Kita A, et al. Development of automated real-time data acquisition system for robotic weld quality monitoring[J]. Mechatronics, 2002, 12(9-10): 1259-1269.

[72] Liu S P, Liu F F, Guo E M, et al. High speed non-destructive testing techinique and its development trend[J]. Aeronautical Manufacturing Technology, 2005(11): 31-34. (in Chinese) 刘松平, 刘菲菲, 郭恩明, 等. 快速无损检测方法及发展趋势[J]. 航空制造技术, 2005(11): 31-34.

[73] Geng R S. On the rapidly developing nondestructive tedting technology in china[J]. Nondestructive Testing, 2008, 30(2): 69-72. (in Chinese) 耿荣生. 迅速发展的中国无损检测事业[J]. 无损检测, 2008, 30(2): 69-72.

[74] Zhou Z G, Feng Z Y, Gao Y F, et al. Application of ultrasonic guided waves to defect inspection of large thin aluminum plate[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4): 1044-1048. (in Chinese) 周正干, 冯占英, 高翌飞, 等. 超声导波在大型薄铝板缺陷检测中的应用[J]. 航空学报, 2008, 29(4): 1044-1048.

[75] Pantano A, Cerniglia D. Simulation of laser-generated ultrasonic wave propagation in solid media and air with application to NDE[J]. Applied Physics A: Materials Science and Processing, 2010, 98(2): 327-336.

[76] Mirkhani K, Chaggares C, Masterson C, et al. Optimal design of EMAT transmitters[J]. NDT&E International, 2004, 37(3): 181-193.

[77] Wei D, Zhou Z G. Finite difference simulation of pulsed ultrasonic propagation in solids[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(2): 388-392. (in Chinese) 魏东, 周正干. 固体中脉冲超声波传播的有限差分模拟[J]. 航空学报, 2010, 31(2): 388-392.

[78] Xu Y F, Xu C G, Xiao D G, et al. Computation and measurement for pulse sound field of ultrasonic transducer[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(6): 1705-1709. (in Chinese) 徐圆飞, 徐春广, 肖定国, 等. 超声换能器脉冲波声场数值计算与测试[J]. 航空学报, 2008, 29(6): 1705-1709.

[79] Liu Z Q, Liu X. Development of ultrasonic nondestructive testing techniques[J]. Nondestructive Testing, 2000, 22(9): 403-405. (in Chinese) 刘镇清, 刘骁. 超声无损检测的若干新进展[J]. 无损检测, 2000, 22(9): 403-405.

[80] Berriman J R, Hutchins D A, Neild A, et al. The application of time-frequency analysis to the air-coupled ultrasonic testing of concrete[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2006, 53(4): 768-776.

[81] Lazaro J C, Emeterio J L S, Ramos A, et al. Influence of thresholding procedures in ultrasonic grain noise reduction using wavelets[J]. Ultrasonics, 2002, 40(1-8): 263-267.

[82] Ho K S, Gan T H, Billson D R, et al. Application of pulse compression signal processing techniques to electromagnetic acoustic transducers for noncontact thickness measurements and imaging[J]. Review of Scientific Instruments, 2005, 76(5): 054902-054908.

[83] Sun Y J, Yuan S F, Qiu L, et al. Structural health monitoring based on Lamb wave phased array and image enhancement[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(7): 1325-1330. (in Chinese) 孙亚杰, 袁慎芳, 邱雷, 等. 基于Lamb波相控阵和图像增强方法的损伤监测[J]. 航空学报, 2009, 30(7): 1325-1330.

[84] Neild A, Hutchins D A, Billson D R. Imaging using air-coupled polymer-membrane capacitive ultrasonic arrays[J]. Ultrasonics, 2004, 42(1-9): 859-864.

[85] Hsu D K. Nondestructive testing using air-borne ultrasound[J]. Ultrasonics, 2006, 44(Sup.): E1019-E1024.

[86] Bezlyud’ko G Y, Dolbnya E V, Leshchenko N G, et al. Portable electromagnetic-acoustic thickness meters (EMAT)[J]. Russian Journal of Nondestructive Testing, 2004, 40(4): 239-245.

[87] Zhou Z G, Li H P, Lu H N. Research on PC/DSP-based ICT image reconstruction system[J]. Acta Aeronautica et Astronautica Sinica, 2003, 24(1): 90-93. (in Chinese) 周正干, 李和平, 路宏年. 基于PC/DSP的ICT图像重建系统研究[J]. 航空学报, 2003, 24(1): 90-93.

[88] Gan T H, Hutchins D A, Billson D R, et al. High-resolution, air-coupled ultrasonic imaging of thin materials[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2003, 50(11): 1516-1524.

[89] Lobkis O I, Chimenti D E, Zhang H. In-plane elastic property characterization in composite plates[J]. Journal of the Acoustical Society of America, 2000, 107(4): 1852-1858.

[90] Potter M D G, Dixon S, Davis C. Development of an automated non-contact ultrasonic texture measurement system for sheet metal[J]. Measurement Science & Technology, 2004, 15(7): 1303-1308.

[91] Hurley D H, Reese S J, Farzbod F. Application of laser-based resonant ultrasound spectroscopy to study texture in copper[J]. Journal of Applied Physics, 2012, 111(5): 1-6.

[92] Karabutov A, Devichensky A, Ivochkin A, et al. Laser ultrasonic diagnostics of residual stress[J]. Ultrasonics, 2008, 48(6-7): 631-635.

[93] Mallet L, Lee B C, Staszewski W J, et al. Structural health monitoring using scanning laser vibrometry: II. Lamb waves for damage detection[J]. Smart Materials & Structures, 2004, 13(2): 261-269.

[94] Wang Q, Yuan S F. Amplifying signal and imaging damage method for active lamb wave structure health monitoring[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4): 1061-1067. (in Chinese) 王强, 袁慎芳. 主动 Lamb 波结构健康监测中信号增强与损伤成像方法[J]. 航空学报, 2008, 29(4): 1061-1067.