定长补偿电火花铣削加工中锥形电极的形成及稳定性
收稿日期: 2013-06-14
修回日期: 2013-11-04
网络出版日期: 2013-11-09
基金资助
国家自然科学基金（51205252）
Formation and Stability of Conical Electrode in ED-milling with Fix-length Compensation Method
Received date: 2013-06-14
Revised date: 2013-11-04
Online published: 2013-11-09
Supported by
National Natural Science Foundation of China (51205252)
电火花铣削可以利用简单电极加工复杂工件，对铣削过程中电极损耗进行补偿是保证工件加工精度的重要措施。使用圆柱电极进行定长补偿铣削加工，加工过程中电极端面会形成一个圆锥形。为保证补偿精度，对电极圆锥形端面的形成及稳定性进行了研究。通过对定长补偿下工件被加工情况的研究，阐述了圆锥形电极形成的具体过程；并且论证了在加工进入稳定阶段以后，圆锥端面角度会基本保持在一个恒定值，研究了初始加工深度和补偿长度对锥形过渡阶段的影响；在电极直径、电参数一定情况下，验证了加工模型中锥形角度与目标加工深度的函数关系，实验结果与模型计算结果相差2.1%；最后给出了加工实例，并获得较好的加工效果。
何磊 , 裴景玉 , 郑博文 , 金方进 . 定长补偿电火花铣削加工中锥形电极的形成及稳定性[J]. 航空学报, 2014 , 35(4) : 1165 -1172 . DOI: 10.7527/S1000-6893.2013.0454
Electrical discharge milling (ED-milling) with simple cylindrical electrode is applied to machining complex parts. In the process of ED-milling, the electrode wear compensation is needed to guarantee the machining precision. The bottom of cylindrical electrode will become conical during the ED-milling process with fix-length compensation method. Studies of the formation and stability of the conical bottom of electrode are conducted in order to ensure the compensation precision. Through the experiments carried out on the workpiece with fix-length compensation method, the formation process of conical bottom is illustrated. When the milling process becomes stable, the angle of conical bottom keeps almost unchanged. The influence of initial machining depth and compensation length on the transition length is also studied. Further experiments reveal that with constant electrode diameter and electrical parameters, the function relationship between the angle and machining depth in the model has been verified rational. The relative error between experimental results and theoretical results is 2.1%, and the method is proved to be effective with a machined cavity.
[1] Jiang H S, Duan S X. Aerial engine spare parts EDM technology research[J]. Electromachining & Mould, 1992(2): 9-15. (in Chinese) 蒋亨顺, 段绍信. 航空发动机零件电火花加工工艺研究[J]. 电加工与模具, 1992(2): 9-15.
[2] Guo J S, Ding F Y, Zhang Y P. Experimental research on the method of time control applied to the precision surface of aerial part in EDM[J]. Electromachining & Mould, 2010(5): 52-55. (in Chinese) 郭建设, 丁凤英, 张云鹏, 等. 时间控制法应用于某航空精密型面零件的电火花加工试验研究[J]. 电加工与模具, 2010 (5): 52-55.
[3] Wang L, Liu Z D, Qiu M B, et al. Study of TC4 controllable burned efficient grinding induced by electrical discharge machining[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(8): 1524-1530 (in Chinese) 王琳, 刘志东, 邱明波, 等. 钛合金TC4电火花诱导可控烧蚀高效磨削技术研究[J]. 航空学报, 2012, 33(8): 1524-1530.
[4] Zhao W S. Advanced electrical discharge machining technology[M]. Beijing: National Defense Industry Press, 2003: 55-59. (in Chinese) 赵万生. 先进电火花加工技术[M]. 北京: 国防工业出版社, 2003: 55-59.
[5] Liu G Z, Yang X D, Chi G X, et al. EDM milling technology and development[J]. Electromachining, 1998(1):1-5. (in Chinese) 刘光壮, 杨晓冬, 迟关心, 等. 电火花铣削加工技术及其发展状况[J]. 电加工, 1998 (1): 1-5.
[6] Jiang Y Z. Application of EDM milling in Aerospace Manufacture[J]. Aviation of Precision Manufacturing Technology, 2013, 49(1): 54-56. (in Chinese) 姜玉珍. 电火花铣削在航空制造中的应用[J]. 航空精密制造技术, 2013, 49(1): 54-56.
[7] Yu Z Y, Masuzawa T, Fujino M. Micro-EDM for three-dimensional cavities-development of uniform wear method[J]. CIRP Annals-Manufacturing Technology, 1998, 47(1): 169-172.
[8] Yu H L, Luan J J, Li J Z, et al. A new electrode wear compensation method for improving performance in 3D micro EDM milling[J]. Journal of Micromechanics and Microengineering, 2010, 20(5): 1-7.
[9] Bleys P, Kruth J P, Lauwers B, et al. Real-time tool wear compensation in milling EDM[J]. Annuals of the CIRP, 2002, 51(1): 157-160.
[10] Bleys P, Kruth J P, Lauwers B. Sensing and compensation of tool wear in milling EDM[J], Journal of Materials Processing Technology, 2004, 149(1): 139-146.
[11] Chang Y F, Chiu Z H. Electrode wear-compensation of electric discharge scanning process using a robust gap-control[J]. Mechatronics, 2004, 14(10): 1121-1139.
[12] Mu T, Yan K Y, Huang C, et al. A study on electrode wear sensing and compensation in Micro-EDM using machine vision system[J]. Manufacturing Technology. 2009, 42(11-12): 1065-1073.
[13] Liu G Z, Yang X D. Electrode wear compensation of EDM milling[J]. Manufacturing Technology & Machine Tool, 1998(8): 30-32. (in Chinese) 刘光壮, 杨晓冬. 电火花铣削加工的电极损耗补偿[J]. 制造技术与机床, 1998 (8): 30-32.
[14] Chi G X, Chu X Y, Di S C, et al. Micro-EDM milling with tube electrode[J]. Journal of Jilin University. 2011, 41(Sup.1): 121-126. (in Chinese) 迟关心, 褚旭阳, 狄士春, 等. 管电极微细电火花铣削加工. 吉林大学学报[J]. 2011, 41(增刊1): 121-126.
[15] Zhou Y, Liu Z X. Research on compensation of tool electrode wear in EDMM[J]. Aviation Precision Manufacturing Technology, 1998(34): 11-14. (in Chinese) 周勇, 刘正埙. 电火花铣削加工中工具电极损耗补偿策略研究[J]. 航空精密制造技术, 1998(34): 11-14.
[16] Pei J Y, Deng R, Hu D J. Bottom surface profile of single slot and fix-length compensation method in micro-EDM process[J]. Journal of Shanghai Jiao Tong University, 2007(6): 42-46. (in Chinese) 裴景玉, 邓容, 胡德金. 微细电火花加工的底面轮廓模型及定长补偿方法[J]. 上海交通大学学报, 2007(6): 42-46.
[17] Xu J L, Li J G, Pei J Y, et al. The fix-length compensation method in single-layer multi-channel machining micro-EDM[J]. Electromachining & Mould, 2009(3): 15-19. (in Chinese) 许加利, 李建功, 裴景玉, 等.单层多道微细电火花定长补偿加工方法[J]. 电加工与模具, 2009(3): 15-19.
/
| 〈 |
|
〉 |
CJA