复杂曲面零件五轴加工刀轴整体优化方法
收稿日期: 2012-07-12
修回日期: 2012-10-29
网络出版日期: 2012-11-29
基金资助
国家自然科学基金(51005183);国家科技重大专项(2011ZX04016-031)
A Global Tool Orientation Optimization Method for Five-axis CNC Machining of Sculptured Surfaces
Received date: 2012-07-12
Revised date: 2012-10-29
Online published: 2012-11-29
Supported by
National Natural Science Foundation of China (51005183); National Science & Technology Major Project (2011ZX04016-031)
针对复杂曲面零件五轴加工中刀轴矢量变化剧烈、严重影响工件表面加工质量的问题,提出一种基于临界约束的五轴刀轴矢量整体优化方法。首先,构造了给定切触点处所有可行摆刀平面,并在摆刀平面内根据临界约束计算出临界刀轴矢量,在获得临界刀轴矢量的基础上,对其进行平面映射,建立了刀轴摆动的初始可行域;其次,通过对初始可行域进行均匀离散,根据离散点之间相对位置关系构造邻接矩阵,并结合最短路径搜索算法获得了初始参考刀轴,从而构造了新的刀轴摆动可行域;最后,建立当前切削行内无干涉且相邻刀轴变化最小的刀轴矢量优化模型,实现自由曲面五轴加工无干涉刀轴矢量的光滑控制。两种自由曲面叶轮的加工算例分析表明,采用本文方法获得的刀轴矢量可以明显改善机床的运动性能,避免了刀具干涉的产生,可提高复杂曲面零件的加工质量与效率。
王晶 , 张定华 , 罗明 , 吴宝海 . 复杂曲面零件五轴加工刀轴整体优化方法[J]. 航空学报, 2013 , 34(6) : 1452 -1462 . DOI: 10.7527/S1000-6893.2013.0242
Dramatic change of tool orientation during a five-axis machining process of sculptured surfaces affects the machining quality seriously. To solve the problem, a global tool orientation optimization method for five-axis machining is proposed based on critical constraints. Firstly, all the feasible swing planes according to the cutter contact points are constructed. Based on the critical constraints, critical tool orientations are obtained in the swing planes, and then the initial feasible tool orientation region is established with planar mapping. Secondly, by evenly discretizing the initial feasible region, an adjacency matrix is constructed according to the relative position relationship of the discrete points. Together with the shortest path algorithm, the initial reference tool orientation is calculated and then a new feasible region is obtained. Finally, the optimization model for tool orientation is established, which guarantees an interference-free current tool path as well as the smallest change between adjacent tool orientations. This method can realize the smooth control of tool orientation for five-axis machining of free-form surfaces without interference. Analysis of two different kinds of impellers with sculptured surfaces demonstrates that the tool orientation obtained by the proposed method can improve the movement performance of machine tools significantly, and the tool interference can be avoided. This method can thus improve the machining efficiency and quality of parts with complicated curvatures.
[1] Ho M C, Hwang Y R, Hu C H. Five-axis tool orientation smoothing using quaternion interpolation algorithm. International Journal of Machine Tool & Manufacture, 2003, 43 (12):1259-1267.
[2] Wang N, Tang K. Automatic generation of gouge-free and angular velocity-compliant five-axis tool path. Computer-Aided Design, 2007, 39(10): 841-852.
[3] Wang Q H, Li J R, Gong H Q. Graphics-assisted cutter orientation correction for collision-free five-axis machining. International Journal of Production Research, 2007, 45(13): 2875-2894.
[4] Kersting P, Zabel A. Optimizing NC-tool paths for simultaneous five-axis milling based on multi-population multi-objective evolutionary algorithms. Advances in Engineering Software, 2009, 40(6): 452-463.
[5] Luo M, Zhang D H, Wu B H, et al. Tool orientation control using quaternion interpolation in multi-axis milling of blade. Proceedings of the International Conference on Manufacturing Automation 2010. HongKong, 2010.
[6] Bi Q Z, Wang Y H, Zhu L M, et al. Wholly smoothing cutter orientations for five-axis NC machining based on cutter contact point mesh. Science China: Technological Sciences, 2010, 40(10): 1159-1168. (in Chinese) 毕庆贞, 王宇晗, 朱利民, 等. 刀触点网格上整体光顺五轴数控加工刀轴方向的模型与算法. 中国科学: 技术科学, 2010, 40(10): 1159-1168.
[7] Morishige K, Takeuchi Y, Kase K. Tool path generation using C-space for 5-axis control machining. Journal of Manufacturing Science and Engineering, 1999, 121(1): 144-149.
[8] Yin Z P, Ding H, Xiong Y L. Accessibility analysis algorithm and application based on visibility cone. Science China: Technological Sciences, 2003, 33(11): 979-988. (in Chinese) 尹周平, 丁汉, 熊有伦. 基于可视锥的可接近性分析方法及其应用. 中国科学: 技术科学, 2003, 33(11): 979-988.
[9] Balasubramaniam M, Laxmiprasad P, Sarma S, et al. Generating 5-axis NC roughing paths directly from a tessellated representation. Computer-Aided Design, 2000, 32(4): 261-277.
[10] Balasubramaniam M, Sarma S E, Marciniak K. Collision-free finishing toolpaths from visibility data. Computer-Aided Design, 2003, 35(4): 359-374.
[11] Bi Q Z, Wang Y H, Ding H. A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter. International Journal of Production Research, 2010, 48(4): 1105-1124.
[12] Jun C S, Cha K, Lee Y S. Optimizing tool orientations for 5-axis machining by configuration-space search method. Computer-Aided Design, 2003, 35(6): 549-566.
[13] Castagnetti C, Duc E, Ray P. The domain of admissible orientation concept: a new method for five-axis tool path optimization. Computer-Aided Design, 2008, 40(9):938-950.
[14] Zhang D H. Study on the theory, method and interface for multi-axis NC programming system. Xi'an: School of Mechanical Engineering, Northwestern Polytechnical University, 1989. (in Chinese) 张定华. 多轴NC编程系统的理论、方法和接口研究. 西安: 西北工业大学机电学院, 1989.
[15] Wang J, Zhang D H, Wu B H, et al. Tool orientation optimization method in four-axis CNC machining based on critical contrains. Journal of Mechanical Engineering, 2012, 48(17): 114-120.(in Chinese) 王晶, 张定华, 吴宝海, 等. 基于临界约束的四轴数控加工刀轴优化方法. 机械工程学报, 2012, 48(17): 114-120.
[16] Luo M. Research on dynamic modeling of low-rigidity process system and controlling of machining processes. Xi'an: School of Mechanical Engineering, Northwestern Polytechnical University, 2012. (in Chinese) 罗明. 弱刚性工艺系统动力学建模与加工过程控制研究. 西安: 西北工业大学机电学院, 2012.
[17] Ding H, Zhu L M. Geometric theories and methods for digital manufacturing of complex surfaces. Beijing: Science Press, 2011: 341-346. (in Chinese) 丁汉, 朱利民. 复杂曲面数字化制造的几何学理论和方法. 北京: 科学出版社,2011: 341-346.
/
| 〈 |
|
〉 |
CJA