| [1] Loney G C, Ozsoy T M. NC machining of free form surfaces[J]. Computer-Aided Design, 1987, 19(2): 85-90.[2] Cho J H, Kim J W, Kim K. CNC tool path planning for multi-patch sculptured surfaces[J]. International Journal of Production Research, 2000, 38(7): 1677-1687.[3] Xu J T, Liu W J, Qiu X J, et al. Isoparametric and spiral tool path for free-form surfaces machining[J].Chinese Journal of Mechanical Engineering, 2010, 46(3): 148-151. (in Chinese) 徐金亭, 刘伟军, 邱晓杰, 等.自由曲面加工中的等参数螺旋轨迹生成方法[J]. 机械工程学报, 2010, 46(3): 148-151.[4] Lasemi A, Xue D, Gu P. Recent development in CNC machining of freeform surfaces:A state-of-the-art review[J]. Computer-Aided Design, 2010, 42(7): 641-654.[5] Choi B K, Lee C S, Hwang J S, et al. Compound surface modelling and machining[J]. Computer-Aided Design, 1988, 20(3): 127-136.[6] Choi B K, Park J W, Jun C S. Cutter location data optimization in 5-axis surface machining[J]. Computer-Aided Design, 1993, 25(6): 377-386.[7] Kim B H, Chu C N. Effect of cutter mark on surface roughness and scallop height in sculptured surface machining[J]. Computer-Aided Design, 1994, 26(3): 179-188.[8] Marciniak K. Influence of surface shape on admissible tool positions in 5-axis face milling[J]. Computer-Aided Design, 1987, 19(5): 233-236.[9] Kruth J P, Klewals P. Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces[J]. CIRP Annals-Manufacturing Technology, 1994, 43(1): 443-448.[10] Song X, Jia C. Research on the influence of a contour —Parallel path interval on the surface quality in NC machining a spatially curved surface//2011 International Conference on Electronic and Mechanical Engineering and Information Technology (EMEIT), 2011: 2623-2627.[11] Zhou Y H, Zhou J. A new method for the determination of path interval in five-axis NC machining of free form surfaces[J]. Journal of Applied Sciences, 1999, 17(2): 127-133. (in Chinese) 周艳红, 周济. 五坐标曲面加工行距控制的新方法[J]. 应用科学学报, 1999, 17(2): 127-133.[12] Yan S J, Zhou Y F, Lai X D, et al. Research on the method of calculating the cutter location optimal path interval in muti-axis machining[J]. Aviation Precision Manufacturing Technology, 2006, 42(5): 35-38. (in Chinese) 严思杰, 周云飞, 赖喜德, 等. 多轴加工刀轨最优行距计算方法研究[J]. 航空精密制造技术, 2006, 42(5): 35-38.[13] Shan Y, Gu Z C, Wang S L. A new model for digitized parametric surfaces in NC tool path generation[J]. Journal of Huazhong University of Science and Technology, 1997, 25(l): 5-7. (in Chinese) 单岩, 顾正朝, 王水来. 一个面向数控加工的曲面数字化模型[J]. 华中理工大学学报, 1997, 25(1): 5-7.[14] Shan Y, Tan J R. Model on method of NC tool path interval estimation for free-form surface machining[J]. Chinese Journal of Mechanical Engineering, 2001, 37(11): 36-41. (in Chinese) 单岩, 谭建荣. 基于MODM 模型的曲面NC加工刀轨行距计算[J]. 机械工程学报, 2001, 37(11): 36-41.[15] Warkentin A, Ismail F, Bedi S. Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces[J]. Computer Aided Geometric Design, 2000, 17(1): 83-100.[16] Jin M, Zhang L, Chen Z T. End-points error controlling method for torus tool position optimization in five-axis NC machining[J]. Journal of Beijing University of Aeronautics and Astronautic, 2006, 32(9): 1125-1128. (in Chinese) 金曼, 张俐, 陈志同. 圆环面刀具五坐标加工端点误差控制刀位优化[J]. 北京航空航天大学学报, 2006, 32(9): 1125-1128.[17] Xu R F, Chen Z T, Chen W Y, et al. Dual drive curve tool path planning method for 5-axis NC machining of sculptured surfaces[J]. Chinese Journal of Aeronautics, 2010, 23(4): 486-494. |
CJA
