嵌入式中温共固化复合材料阻尼结构制作工艺及层间结合性能

doi:10.7527/S1000-6893.2013.0069

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

嵌入式中温共固化复合材料阻尼结构制作工艺及层间结合性能

张忠胜, 梁森

青岛理工大学机械工程学院, 山东青岛 266033

收稿日期:2012-10-08 修回日期:2013-01-08 出版日期:2013-08-25 发布日期:2013-01-23
通讯作者: 梁森 E-mail:liangsen98@mailst.xjtu.edu.cn
作者简介:张忠胜男,硕士研究生。主要研究方向:结构动力学。Tel:0532-85071299 E-mail:zshengzhang@gmail.com;梁森男,博士,教授,博士生导师。主要研究方向:复合材料动力学设计。Tel:0532-85071299 E-mail:liangsen98@mailst.xjtu.edu.cn
基金资助:
国家自然科学基金(50875135);山东省自然科学基金(Z2007F04)

Manufacturing Process and Interlaminar Bonding Property of Embedded Medium-temperature Co-cured Composite Material Damping Structure

ZHANG Zhongsheng, LIANG Sen

College of Mechanical Engineering, Qingdao Technological University, Qingdao 266033, China

Received:2012-10-08 Revised:2013-01-08 Online:2013-08-25 Published:2013-01-23
Supported by:
National Natural Science Foundation of China (50875135);Natural Science Foundation of Shandong Province (Z2007F04)

摘要/Abstract

摘要：

嵌入式共固化复合材料阻尼结构层间易脱层问题的解决对这种新型阻尼结构的应用来说至关重要。本文根据中温固化玻璃纤维/环氧树脂复合材料固化工艺参数,提出用正交实验法研究嵌入复合材料层中的粘弹性阻尼薄膜的组分,探索用刷涂工艺在预浸料表面刷涂不同厚度的阻尼薄膜,然后利用固化工艺制作嵌入式共固化复合材料试件,最后通过阻尼层剪切实验, 获得阻尼薄膜厚度与层间最大剪切应力的变化曲线。失效界面分析说明刷涂工艺制成的阻尼薄膜与玻璃纤维/环氧树脂预浸料共固化反应后在层间形成互穿网络结构(IPN)和物理融合,这使得嵌入式共固化复合材料具有更好的层间结合性能。

关键词: 嵌入式共固化复合材料, 阻尼, 刷涂阻尼薄膜, 阻尼层厚度, 层间剪切

Abstract:

The solution to the delamination of an embedded co-cured composite material damping structure is critical for the application of the new damping structure. In this paper an orthogonal experiment method is proposed to investigate the ingredients of a viscoelastic damping material embedded in a composite material. The brush coating process is employed to coat the damping material films with various thicknesses on the surface of a composite prepreg. After the specimens of the embedded co-cured composite damping structure are manufactured according to the curing process parameters of glass fiber/epoxy composites, the interlamination shear measurements are completed. A curve of the maximum interlamination shear stress with respect to damping film thickness is obtained. At the same time the effect of damping layer thickness on the shear property is studied in detail. The shear failure analysis indicates that Interpenetrating Polymer Network (IPN) structures and physical mixture are formed during the co-curing reaction and this structure enables the embedded co-cured composite to possess an excellent interlamination bonding property.

Key words: embedded co-cured composite, damping, brush coating damping film, damping layer thickness, interlamination shear

中图分类号:

V414.8
TB332

张忠胜, 梁森. 嵌入式中温共固化复合材料阻尼结构制作工艺及层间结合性能[J]. 航空学报, 2013, 34(8): 1972-1979.

ZHANG Zhongsheng, LIANG Sen. Manufacturing Process and Interlaminar Bonding Property of Embedded Medium-temperature Co-cured Composite Material Damping Structure[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(8): 1972-1979.

参考文献

[1] Zhang S H, Chen H L. Development of research on damping of fiber reinforced composite—a review. Journal of Aeronautical Materials, 2002, 22(1): 58-62. (in Chinese) 张少辉, 陈花玲. 国外纤维增强树脂基复合材料阻尼研究综述. 航空材料学报, 2002, 22(1): 58-62.

[2] Soutis C. Fiber reinforced composites in aircraft construction. Progress in Aerospace Sciences, 2005, 41(2): 143-151.

[3] Du S Y. Advanced composite materials and aerospace engineering. Acta Materiae Compositae Sinica, 2007, 24(1): 1-12. (in Chinese) 杜善义. 先进复合材料与航空航天. 复合材料学报, 2007, 24(1): 1-12.

[4] Maly J R, Johnson C D. Cocured viscoelastic composites. Proceedings of Smart Structures and Materials, 1996: 365-376.

[5] Napolitano K L, Kosmatka J B. Co-cured extension-twist coupled damped composite strut. Journal of Composite Materials, 1998, 32(21): 1914-1932.

[6] Olcott D D, Rotz C A, Eastman P F. Improved vibration damping in composite structures using "zig-zag" fibers and embedded viscoelastic damping layers. Society for the Advancement of Material and Process Engineering, 1993: 1357-1370.

[7] Rotz C A, Barrett D J. Cocured damping layers in composite structures. Proceedings of the 23rd International SAMPE Technical Conference, 1991: 352-363.

[8] Liang S, Liang L, Mi P. New development of the embedded and co-cured composite damping structures. Chinese Journal of Applied Mechanics, 2010, 27(4): 767-771. (in Chinese) 梁森, 梁磊, 米鹏. 嵌入式共固化复合材料阻尼结构的新进展. 应用力学学报, 2010, 27(4): 767-771.

[9] Mi P, Liang S, Zhang Y X. Numerical simulation on performance of embedded and co-cured composite damping structure under low velocity impact. Journal of Vibration and Shock, 2012, 31(14): 98-101. (in Chinese) 米鹏, 梁森, 张义霞. 嵌入式共固化复合材料阻尼结构低速冲击性能的数值模拟. 振动与冲击, 2012, 31(14): 98-101.

[10] Pan L J, Zhang B M. A new method for the determination of damping in cocured composite laminates with embedded viscoelastic layer. Journal of Sound and Vibration, 2009, 319(3-5): 822-831.

[11] Li X, Liang S, Wu N J, et al. Investigation on damping characteristics of the embedded co-cured composite damping structures. Science Technology and Engineering, 2010, 10(6): 1510-1513. (in Chinese) 李烜, 梁森, 吴宁晶, 等. 嵌入式共固化复合材料阻尼结构阻尼性能的实验研究. 科学技术与工程, 2010, 10(6): 1510-1513.

[12] Liang S, Zhang Z S, Mi P. Sound insulation characteristics of the embedded and mid-temperature co-cured composite damping structures. Emerging Materials and Mechanics Applications, 2012, 487: 598-602.

[13] Liang S, Wang H. Zhang Z S. Investigation on the dynamics performance of the embedded high-temperature co-cured composite damping structures. Journal of Vibration and Shock(in press).(in Chinese) 梁森, 王辉, 张忠胜. 嵌入式高温共固化复合材料阻尼结构动力学性能实验研究. 振动与冲击(待发表).

[14] Xie S Z, Liu D X, Zhou M L. Handbook of rubber industry. Beijing: Chemical Industry Press, 1989: 478-490. (in Chinese) 谢遂志, 刘登祥, 周鸣峦. 橡胶工业手册. 北京:化学工业出版社, 1989: 478-490.

[15] Dick J S, Annicelli R A. Rubber technology: compounding and testing for performance. Cincinnati: Hanser Gardner Publications Inc, 2001: 443-445.

[16] Zhang Y, He L L. Research on types of phenolic resin curing bisphenol-A epoxy resin. Proceedings of the 17th GRP/Composite material annual conference, Beijing: China Institute of Silicate Glass Steel Branch, 2008: 145-149. (in Chinese) 张扬, 何鲁林. 双酚A环氧树脂与不同类型酚醛树脂固化反应的初步研究. 第十七届玻璃钢/复合材料学术年会论文集, 北京: 中国硅酸盐学会玻璃钢分会, 2008: 145-149.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

嵌入式中温共固化复合材料阻尼结构制作工艺及层间结合性能

Manufacturing Process and Interlaminar Bonding Property of Embedded Medium-temperature Co-cured Composite Material Damping Structure

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李国强, 宋奎辉, 覃晨, 赵光银, 吴霖鑫, 杨永东. 基于后缘小翼的翼型动态失速主动控制试验[J]. 航空学报, 2024, 45(3): 128699-128699.
[2]	曾宪昂, 赵冬强, 李俊杰, 严泽洲, 刘成玉. 弹性机翼阵风减缓控制策略风洞试验[J]. 航空学报, 2023, 44(4): 226869-226869.
[3]	王廷章, 全齐全, 艾鑫, 唐德威, 邓宗全. 小行星探测器电磁阻尼着陆缓冲遇阻特性[J]. 航空学报, 2023, 44(13): 227783-227783.
[4]	李英杰, 赵广, 吴学深, 李坚, 袁巍, 梅庆. 航空花键-转子系统自激振动研究综述[J]. 航空学报, 2022, 43(8): 625532-625532.
[5]	汪博, 高培鑫, 马辉, 孙伟, 林君哲, 李晖, 韩清凯, 刘中华. 航空发动机管路系统动力学特性综述[J]. 航空学报, 2022, 43(5): 25332-025332.
[6]	杜一江. 航空拖曳诱饵系统机动过程缆绳张力仿真[J]. 航空学报, 2021, 42(9): 224495-224495.
[7]	马战奇, 孙秀文, 王玲奇. 旋翼减摆自润滑衬套疲劳试验温度设计与控制[J]. 航空学报, 2021, 42(5): 524217-524217.
[8]	倪维宇, 张横, 姚胜卫. 考虑阻尼性能的复合结构多尺度拓扑优化设计[J]. 航空学报, 2021, 42(3): 224807-224807.
[9]	刘昊, 王巍, 金伟, 牛文超, 杨智春. 垂尾抖振响应的鲁棒-FxLMS主动控制试验[J]. 航空学报, 2021, 42(2): 224090-224090.
[10]	宋凯, 方志泓, 崔西明, 张丽攀, 霍俊宏. 飞机铆接构件PRFECT探头的线圈夹角影响[J]. 航空学报, 2021, 42(10): 524647-524647.
[11]	黄卫权, 方涛, 王宗义. 改进的格网惯导系统无阻尼综合校正方法[J]. 航空学报, 2020, 41(9): 323921-323921.
[12]	龙谦, 阮健, 李胜, 何晋飞. 考虑气穴影响的2D压力伺服阀稳定性[J]. 航空学报, 2020, 41(5): 423281-423281.
[13]	袁维东, 高瞻, 刘浩康, 缪国峰. 基于改进准则法的复合壳阻尼结构拓扑减振动力学优化[J]. 航空学报, 2020, 41(1): 223162-223162.
[14]	赵本勇, 宋凯, 宁宁, 黄华斌, 张丽攀. 飞机铆接件隐藏缺陷的远场涡流检测探头优化与试验[J]. 航空学报, 2020, 41(1): 423111-423111.
[15]	樊伟, 郑联语, 赵雄, 杨毅青, 刘新玉, 杨森. 基于新型电涡流阻尼器的大飞机垂尾装配界面精加工振动抑制[J]. 航空学报, 2019, 40(9): 422859-422859.