直角切削6061-T6铝合金剪切区力学行为及微观结构演化预测

doi:10.7527/S1000-6893.2020.23975

Abstract

Abstract: Mechanical behavior is the macroscopic expression of the microscopic process of plastic deformation. Early metal cutting theoretical models did not consider the effect of microstructure on the cutting force. Based on the dislocation density material model, a 6061-T6 aluminum alloy orthogonal cutting force prediction model is established, and the influence of dislocation motion based plastic deformation mechanism on the cutting force with different cutting parameters is analyzed. By combining the model of equal division shear zones and unequal division shear zones, we construct a multi-physics field calculation method for the first deformation zone, and propose an analytical model of microstructure evolution caused by plastic deformation during chip formation. The feasibility of the model is preliminarily verified by measuring the cutting force and the size of grain in the chip. The results show that the material increase involved in the dislocation slip caused by the length of the shear zone is the main reason for the increase of the feed rate, which further leads to the increase of the cutting force. The decrease in the cutting force caused by the increasing cutting speed is not the result of a single variable, but the joint effect of the number reduction of dislocations induced by the strain reduction and the annihilation increase resulted from temperature increase. The non-divided shear zone model correctly reflects the temperature and stress distribution characteristics of the first deformation zone, and is consistent with the two-dimensional finite element model. The analytical model of the microstructure evolution of the first deformation zone can predict the dislocation density and grain size in the chip.

Key words: 6061-T6 aluminum alloy, shear zone, cutting force, microstructure, dislocation density, grain size

CLC Number:

V261

ZHOU Tao, HE Lin, TIAN Pengfei, DU Feilong, WU Jinxing. Prediction of mechanical behavior and microstructure evolution of shear zone in orthogonal cutting 6061-T6 aluminum alloy[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 423975-423975.

References

[1] MERCHANT M E. Mechanics of the metal cutting process. I. orthogonal cutting and a type 2 chip[J]. Journal of Applied Physics, 1945, 16(5):267-275.
[2] HILL R. The mechanics of machining:A new approach[J]. Journal of the Mechanics and Physics of Solids, 1954, 3(1):47-53.
[3] LEE E. The theory of plasticity applied to a problem of machining[J]. Journal of Applied Mechanics, 1951, 18:405.
[4] LIU R, SALAHSHOOR M, MELKOTE S N, et al. A unified material model including dislocation drag and its application to simulation of orthogonal cutting of OFHC copper[J]. Journal of Materials Processing Technology, 2015, 216:328-338.
[5] PAN Z P, SHIH D S, TABEI A, et al. Modeling of Ti-6Al-4V machining force considering material microstructure evolution[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(5-8):2673-2680.
[6] WU H, MA J F, LEI S T. FEM prediction of dislocation density and grain size evolution in high-speed machining of Al6061-T6 alloy using microgrooved cutting tools[J]. The International Journal of Advanced Manufacturing Technology, 2018, 95(9-12):4211-4227.
[7] DING H T, SHEN N G, SHIN Y C. Modeling of grain refinement in aluminum and copper subjected to cutting[J]. Computational Materials Science, 2011, 50(10):3016-3025.
[8] BAMMANN D J, CHIESA M L, JOHNSON G C. Modeling large deformation and failure in manufacturing processes[J]. Theoretical and Applied Mechanics, 1996, 9:359-376.
[9] GUO Y B, WEN Q, WOODBURY K A. Dynamic material behavior modeling using internal state variable plasticity and its application in hard machining simulations[J]. Journal of Manufacturing Science and Engineering, 2006, 128(3):749-759.
[10] FOLLANSBEE P S, KOCKS U F. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable[J]. Acta Metallurgica, 1988, 36(1):81-93.
[11] DING H T, SHIN Y C. Multi-physics modeling and simulations of surface microstructure alteration in hard turning[J]. Journal of Materials Processing Technology, 2013, 213(6):877-886.
[12] TAO J F, QIN C J, XIAO D Y, et al. A pre-generated matrix-based method for real-time robotic drilling chatter monitoring[J]. Chinese Journal of Aeronautics, 2019, 32(12):2755-2764.
[13] ESTRIN Y, TOTH L S, MOLINARI A, et al. A dislocation-based model for all hardening stages in larges strain deformation[J]. Acta Materialia, 1998, 46(15):5509-5522.
[14] ARISOY Y M, ÖZEL T. Prediction of machining induced microstructure in Ti-6Al-4V alloy using 3-D FE-based simulations:Effects of tool micro-geometry, coating and cutting conditions[J]. Journal of Materials Processing Technology, 2015, 220:1-26.
[15] 杜茂华, 程正, 王神送,等. 损伤演化对Ti6Al4V高速切削仿真结果的影响[J]. 航空学报, 2019, 40(7):422787. DU M H, CHENG Z, WANG S S, et al. Effects of damage evolution on simulation results of hign speed maching TiAl4V[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(7):422787(in Chinese).
[16] JAFARIAN F, MASOUDI S, UMBRELLO D, et al. New strategies for improvement of numerical model accuracy in machining of nickel-based alloy[J]. Simulation Modelling Practice and Theory, 2019, 94:134-148.
[17] KOCKS U F. Laws for work-hardening and low-temperature creep[J]. Journal of Engineering Materials and Technology, 1976, 98(1):76-85.
[18] OXLEY P L B, SHAW M C. Mechanics of machining:an analytical approach to assessing machinability[M]. London:Ellis Horwood Limited, 1990.
[19] WANG Z G. High-speed milling of titanium alloys:Modeling and optimization[D]. Singapore:National University of Singapore, 2005.
[20] ALTINTAS Y, BER A A. Manufacturing automation:metal cutting mechanics, machine tool vibrations, and CNC design[M]. New York:Cambridge University Press, 2001.
[21] PANG L. Analytical modeling and simulation of metal cutting forces for engineering alloys[D]. Oshawa:University of Ontario Institute of Technology, 2012.
[22] WALDORF D J, DEVOR R E, KAPOOR S G. A slip-line field for ploughing during orthogonal cutting[J]. Journal of Manufacturing Science & Engineering, 1998, 120(4):693-699.
[23] SU J C. Residual stress modeling in machining processes[D]. Atlanta:Georgia Institute of Technology, 2006.
[24] ASTAKHOV V P, OSMAN M O M, HAYAJNEH M T. Re-evaluation of the basic mechanics of orthogonal metal cutting:velocity diagram, virtual work equation and upper-bound theorem[J]. International Journal of Machine Tools and Manufacture, 2001, 41(3):393-418.
[25] ZHOU F J, WANG X L, HU Y J, et al. Modeling temperature of non-equidistant primary shear zone in metal cutting[J]. International Journal of Thermal Sciences, 2013, 73:38-45.
[26] ATMANI Z, HADDAG B, NOUARI M, et al. Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining[J]. International Journal of Mechanical Sciences, 2016, 118:77-90.
[27] 余勇, 潘晓霞. Frank-Read位错源的细观级模拟[J]. 金属学报, 2009, 45(11):1309-1313. YU Y, PAN X X. Meso-scale simulation of frank-read dislocation sources[J]. Acta Metallurgica Sinica, 2009, 45(11):1309-1313(in Chinese).
[28] 刘具龙, 张璧, 白倩, 等. 钛合金铣削刀具/工件接触区域温度预测[J]. 航空学报, 2018, 39(12):422128. LIU J L, ZHAG B, BAI Q, et al. Temperature prediction of tool/workpiece contact zone in titanium milling[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(12):422128(in Chinese).
[29] SHAN C W, ZHANG X, SHEN B, et al. An improved analytical model of cutting temperature in orthogonal cutting of Ti6Al4V[J]. Chinese Journal of Aeronautics, 2019, 32(3):759-769.
[30] ORRA K, CHOUDHURY S K. Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land[J]. International Journal of Mechanical Sciences, 2018, 142:255-268.
[31] LI H Z, WANG H J, LIANG X P, et al. Hot deformation and processing map of 2519A aluminum alloy[J]. Materials Science and Engineering:A, 2011, 528(3):1548-1552.
[32] JAVIDIKIA M, SADEGHIFAR M, SONGMENE V, et al. On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6:An experimentally validated numerical study[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(9):4547-4565.

Prediction of mechanical behavior and microstructure evolution of shear zone in orthogonal cutting 6061-T6 aluminum alloy

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Jiahong NIU, Haonan JIA, Fajun YI, Zujun PENG, Wei CHEN. Low-pressure thermal stability and high-temperature electrical conductivity of dense amorphous SiCN [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 152-159.
[2]	ZHAO Kehan, LIU Duo, ZHU Haitao, CHEN Bin, HU Shengpeng, SONG Xiaoguo. Effect of brazing temperature on microstructure and mechanical property of C/C/AgCuTi+C_f/TC4 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525007-525007.
[3]	WANG Miao, WANG Wei, YANG Yunlong, TAN Caiwang, WANG Gang. Effect of brazing time on microstructure and properties of SiC ceramic brazed with CoFeNiCrCu [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525057-525057.
[4]	YANG Jiankai, GU Dongdong, GE Qing, TAN Chenchen, WEN Yu. Support layout and precise forming mechanism of aluminum alloy for laser additive manufacturing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525331-525331.
[5]	ZHANG Quanli, CHU Chenglong, ZHAI Jianchao, WANG Yukai, ZHANG Zhen, XU Jiuhua. Surface characteristics formation mechanism of ablated monocrystalline silicon by UV nanosecond pulsed laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525341-525341.
[6]	HU Xianliang, QIAO Hongchao, ZHAO Jibin, LU Ying, WU Jiajun, YANG Yuqi. Effect of laser shock wave on thermal corrosion resistance of single crystal alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525591-525591.
[7]	YANG Xiawei, PENG Chong, MA Tiejun, WEN Guodong, WANG Yanying, CHAI Xiaoxia, XU Yaxin, LI Wenya. Finite element analysis of fatigue crack growth of linear friction welded superalloy joints [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625004-625004.
[8]	LI Xiaopeng, HAN Rui, QIAN Xusheng, ZHANG Binggang, WANG Kehong. Effect of adding boron element on microstructure and shear strength of Ni-25at%Si/Ti600 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625069-625069.
[9]	LI Hongliang, CUI Zhanxiang, LIU Shixiong, MA Qiang, YAO Yiqiang, LEI Yucheng. Acoustic-electric characteristics and process of ultrasonic-arc MIG welding of 6061 aluminum alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624969-624969.
[10]	CAI Xiaoqiang, WANG Dongpo, WANG Ying, YANG Zhenwen. Interfacial microstructure and mechanical properties of TiB₂-TiC-SiC ceramics joints fabricated by contact reactive brazing technique [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625006-625006.
[11]	LU Chuanyang, CHEN Gangqiang, TANG Xiatao, HE Yanming, YANG Jianguo, ZHENG Wenjian, MA Yinghe, LI Huaxin, GAO Zengliang. Microstructure and mechanical properties of Hastelloy N superalloy joints brazed using BNi71CrSi filler alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625040-625040.
[12]	YANG Huanping, ZHUANG Wei, WANG Yaomian, YAN Wenbin. Influence of severe plastic deformation on thermal oxidation of titanium alloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 424656-424656.
[13]	CUI Jing, ZHANG Hang, ZHAI Wei, LU Mengke, YANG Guangfeng. Experiment on ice suppression characteristics of TC4 microstructure surface induced by femtosecond pulse laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 424032-424032.
[14]	DONG Zhigang, GAO Yu, KANG Renke, YANG Guolin, BAO Yan. Hole diameter deviation in helical milling of titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 423841-423841.
[15]	HU Shengpeng, LI Wenqiang, FU Wei, SONG Xiaoguo, LONG Weimin, CAO Jian. Interfacial microstructure and mechanical properties of high Nb containing TiAl alloy and GH3536 superalloy brazed using amorphous BNi-2 filler [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 423846-423846.