基于Karhunen-Loève展开的分布式变体飞行器最优控制方法

doi:10.7527/S1000-6893.2017.21518

流体力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于Karhunen-Loève展开的分布式变体飞行器最优控制方法

龚春林^1,2, 赤丰华^1,2, 谷良贤^1,2, 方海^1,2

1. 西北工业大学航天学院陕西省空天飞行器设计重点实验室, 西安 710072;
2. 西北工业大学航天飞行动力学技术重点实验室, 西安 710072

收稿日期:2017-06-15 修回日期:2017-10-24 出版日期:2018-02-15 发布日期:2017-10-24
通讯作者: 龚春林,E-mail:154552879@qq.com E-mail:leonwood@nwpu.edu.cn
基金资助:
国防基础科研项目（JCKY2016204B102）；中央高校基本科研业务费专项资金（G2016KY0302）

Optimal control method for distributed morphing aircraft based on Karhunen-Loève expansion

GONG Chunlin^1,2, CHI Fenghua^1,2, GU Liangxian^1,2, FANG Hai^1,2

1. Shaanxi Aerospace Flight Vehicle Design Key Laboratory, School of Astronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. National Key Laboratory of Aerospace Flight Dynamics, Northwestern Polytechnical University, Xi'an 710072, China

Received:2017-06-15 Revised:2017-10-24 Online:2018-02-15 Published:2017-10-24
Supported by:
Defense Industrial Technology Development Program (JCKY2016204B102); Fundamental Research Funds for the Cen-tral Universities(G2016KY0302)

摘要/Abstract

摘要： 针对分布式变体飞行器变形规律优化问题的特殊性和计算困难性，提出了一种有效的解决方法。该问题的变形变量在空间和时间上均具有无穷维度，求解难点体现在：现有最优控制方法无法直接求解无穷维控制量问题；变形引起的气动模型数据维度增加，计算量呈级数增长，制约了优化求解。针对这两个问题，基于Karhunen-Loève展开方法对分布变形域进行离散和降维，采用有限维变形控制参数和几何模态描述，将原优化问题转化为可求解的有限维最优控制问题；采用Kriging方法和拉丁超立方抽样（LHS）方法构造了与变形控制参数相关的气动代理模型，大幅降低求解该问题的严重计算负担；结合离散降维最优控制模型和气动代理模型，基于hp自适应伪谱方法，建立了变形规律优化求解过程。以翼型分布式变体问题为例，对给定的飞行任务要求，以燃料消耗最省为目标，实现了全弹道翼型变形过程和迎角、燃油消耗率等控制量的同时优化，获得了更省能量的变体飞行方案，验证了所提方法的可行性。本文所发展方法具有通用性，能扩展到机体/弹体等更为复杂的变体形式，可为未来变体飞行技术发展提供支持。

关键词: 分布式变体, 变体飞行器, Karhunen-Loève展开, 代理模型, 最优控制, hp自适应伪谱方法

Abstract: To solve the calculation difficulty in morphing rule optimization of the distributed morphing aircraft, an effective method is proposed. The morphing control parameters in the optimization have infinite dimensions in time and space, and the calculation difficulties are shown as follows:the present method cannot obtain the parameters for infinite dimension control; as morphing control parameters are added to the model, the aerodynamic calculation cost grows fastly to restrict the optimization process. To overcome the two difficulties, the Karhunen-Loève expansion is used to discrete the morphing area and reduce dimensions. The original optimization problem is then transformed into finite dimension optimal control problem based on parameters and geometry modalities of finite dimension morphing control. The surrogate model of aerodynamics relating to morphing control parameters is developed by Latin Hypercube Sampling (LHS) and Kriging method, reducing dramatically the high cost of computation based on CFD. The discrete finite dimension optimal control model and the surrogate model of aerodynamics are combined to build the optimization process of the morphing rule based on the hp-adaptive pseudospectral method. The optimization of the airfoil morphing progress and control parameters such as angle of attack and fuel mass flow rate in the whole trajectory is achieved in a given flight, obtaining the optimal fuel consumption morphing flight plan and demonstrating the effectiveness of the method proposed. The method can be expanded to more complex morphing objects such as airframe, and provides a support for future morphing flight technology.

Key words: distributed morphing, morphing aircraft, Karhunen-Loève expansion, surrogate model, optimal control, hp-adaptive pseudospectral method

中图分类号:

V212

龚春林, 赤丰华, 谷良贤, 方海. 基于Karhunen-Loève展开的分布式变体飞行器最优控制方法[J]. 航空学报, 2018, 39(2): 121518-121518.

GONG Chunlin, CHI Fenghua, GU Liangxian, FANG Hai. Optimal control method for distributed morphing aircraft based on Karhunen-Loève expansion[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(2): 121518-121518.

参考文献

[1] 杜厦, 昂海松. 改变飞机变体机翼优化方法与气动特性仿真[J]. 计算机仿真, 2013, 30(3):88-91. DU X, ANG H S. Optimization method and aerodynamic character simulation of morphing wing[J]. Computer Simulation, 2013, 30(3):88-91(in Chinese).[2] KEULEN B V. H_∞-control for distributed parameter systems:A state-space approach[M]. Boston,MA:Birkhäuser Boston, 1993:101-129.[3] RAMRAKHYANI D S, LESIEUTRE G A, FRECKER M I, et al. Aircraft structural morphing using tendon-actuated compliant cellular trusses[C]//Morphing Aircraft Structures Using Tendon Actuated Compliant Cellular truss, 2005:1615-1621.[4] AUSTIN A F, NOSTRAND W C V. Shape control of an adaptive wing for transonic drag reduction[J]. Smart Materials and Structures, 1995, 2447:45-50.[5] 文哲远. 分布式驱动变体飞行器控制的仿真系统研究[D]. 南京:南京航空航天大学, 2012:11-21. WEN Z Y. Research on simulation system of distributed driven morphing aircraft control[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012:11-21(in Chinese).[6] 何真. 变体飞行器基础控制问题研究[D]. 南京:南京航空航天大学, 2009:77-95. HE Z. Research on basic control problem of morphing aircraft[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2009:77-95(in Chinese).[7] 吴俊. 变形翼分布式协同控制技术研究[D]. 南京:南京航空航天大学, 2011:82-93. WU J. Research on distributed coordinated control technology of morphing wing[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2011:82-93(in Chinese).[8] 陆宇平, 何真. 变体飞行器控制系统综述[J]. 航空学报, 2009, 30(10):1906-1911. LU Y P, HE Z. A survey of morphing aircraft control systems[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(10):1906-1911(in Chinese).[9] RODRIGUEZ A. Morphing aircraft technology survey[C]//AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA:AIAA, 2013:1-6.[10] 杨智春, 解江. 柔性后缘自适应机翼的概念设计[J]. 航空学报, 2009, 30(6):1028-1034. YANG Z C, XIE J. Concept design of adaptive wing with flexible trailing edge[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(6):1028-1034(in Chinese).[11] 李伟, 熊克, 陈宏,等. 用于变体翼梢小翼的伸缩栅格研究[J]. 航空学报, 2011, 32(10):1796-1805. LI W, XIONG K, CHEN H, et al. Research of retractable grid applied to morphing winglet[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(10):1796-1805(in Chinese).[12] FALCÃO L, GOMES A, SULEMAN A. Multidisciplinary design optimisation of a morphing wingtip[C]//International Conference on Engineering Optimization, 2010.[13] HOLLAND M, MOORE B, FERGUSON S. ‘Transforming’ for stability and aerodynamic performance in a reconfigurable UAV[C]//12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston, VA:AIAA, 2012.[14] DALE A, COOPER J E, MOSQUERA A. Adaptive camber-morphing wing using 0-υ honeycomb[C]//AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, VA:AIAA, 2013.[15] VALE J, LAU F, SULEMAN A. Optimal control and energy balance evaluation of a morphing aircraft[C]//AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, VA:AIAA, 2013.[16] MIR I, MAQSOOD A, AKHTAR S. Optimization of dynamic soaring maneuvers for a morphing capable UAV[C]//AIAA SciTech Forum. Reston, VA:AIAA, 2017.[17] RYAN K, LEWIS M. Trajectory optimization studies of long range morphing projectiles[C]//AIAA Atmospheric Flight Mechanics Conference. Reston, VA:AIAA, 2012.[18] 严旭飞, 陈仁良. 倾转旋翼机动态倾转过渡过程的操纵策略优化[J]. 航空学报, 2017, 38(7):720865. YAN X F, CHEN R L. Control strategy optimization of dynamic conversion procedure of tilt-rotor aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7):720865(in Chinese).[19] 李焕焕. 新概念变形飞行器飞行轨迹优化设计[D]. 哈尔滨:哈尔滨工业大学, 2015:38-53. LI H H. Optimal flight trajectory design of new concept morphing aircraft[D]. Harbin:Harbin Institute of Technology,2015:38-53(in Chinese).[20] NIGAM N, ZHANG Y, CHEN P, et al. Adaptive control and actuation system development for biomimetic morphing[C]//AIAA/AHS Adaptive Structures Conference. Reston, VA:AIAA, 2015.[21] GUO T, HOU Z, ZHU B. Dynamic modelling and active morphing trajectory-attitude separation control approach for gull-wing aircraft[J]. IEEE Access, 2017, 5:17006-17019.[22] 高仁璟, 张莹, 赵剑,等. 面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计[J]. 机械工程学报, 2016, 52(18):177-183. GAO R J, ZHANG Y, ZHAO J, et al. Integrated design optimization of MFC-layout form and control parameters for morphing structural shapes[J]. Journal of Mechanical Engineering, 2016, 52(18):177-183(in Chinese).[23] 董朝阳, 路遥, 江未来,等. 基于布谷鸟搜索算法的一类变体飞行器容错控制[J]. 航空学报, 2015, 36(6):2047-2054. DONG Z Y, LU Y, JIANG W L, et al. Fault tolerant control based on cuckoo search algorithm for a class of morphing aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6):2047-2054(in Chinese).[24] FUKUNAGA K, KOONTZ W L G. Application of the Karhunen-Loève expansion to feature selection and ordering[J]. IEEE Transactions on Computers, 1970, C-19(4):311-318.[25] SCHILLINGS C, SCHULZ V. On the influence of robustness measures on shape optimization with stochastic uncertainties[J]. Optimization and Engineering, 2015, 16(2):1-40.[26] 方开泰. 均匀试验设计的理论、方法和应用——历史回顾[J]. 数理统计与管理, 2004, 23(3):69-80. FANG K T. Theory, method and application of uniform experimental design-History review[J]. Journal of Applied Statistics and Management, 2004, 23(3):69-80(in Chinese).[27] KRIGE D G. A statistical approach to some basic mine valuation problems on the witwatersrand[J]. Operational Research Quarterly, 1953, 4(1):18.[28] 李新,程国栋,卢玲.空间内插方法比较[J]. 地球科学进展, 2000, 15(3):260-265. LI X, CHENG G D, LU L. The comparison of spatial interpolation methods[J]. Advances in Earth Science, 2000, 15(3):260-265(in Chinese).[29] GANDHI M. Trajectory optimization algorithm studies[J]. Mathematics, 2015, 15(2):267-281.[30] 张博渊, 宗群, 鲁瀚辰,等. 基于hp自适应伪谱法的四旋翼无人机编队轨迹优化[J]. 科技导报, 2017, 35(7):69-76. ZHANG B Y, ZONG Q, LU H C, et al. Trajectory optimization of quad-rotor uav formation using hp-adaptive pseudospectral method[J]. Scientia Technologica Sinica, 2017, 35(7):69-76(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于Karhunen-Loève展开的分布式变体飞行器最优控制方法

Optimal control method for distributed morphing aircraft based on Karhunen-Loève expansion

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨倩, 郭晓峰, 李芹, 董威. 基于POD和代理模型的热气防冰性能预测方法[J]. 航空学报, 2023, 44(1): 626992-626992.
[2]	牛俊杰, 桑为民, 李栋, 郝莲, 王泽林. 一种基于水滴收集量代理模型的结冰试飞空域确定方法[J]. 航空学报, 2023, 44(1): 627697-627697.
[3]	郭琪磊, 桑为民, 牛俊杰, 袁烨. 复杂气象条件下考虑结冰风险的无人机飞行策略[J]. 航空学报, 2023, 44(1): 627518-627518.
[4]	王晨, 杨洋, 沈星, 夏育颖. 用于变体飞行器的波纹板等效强度模型及其优化设计[J]. 航空学报, 2022, 43(6): 526146-526146.
[5]	胡嘉欣, 芮姝, 高瑞朝, 苟建军, 龚春林. 飞行器结构布局与尺寸混合优化方法[J]. 航空学报, 2022, 43(5): 225363-225363.
[6]	李海泉, 陈小前, 左林玄, 赵卓林. 基于随机森林的飞行载荷代理模型分析方法[J]. 航空学报, 2022, 43(3): 225640-225640.
[7]	颜黎明, 郭鑫, 赵冬冬. 基于新型权重解析法的永磁电机预测转矩控制[J]. 航空学报, 2022, 43(12): 327785-327785.
[8]	冉茂鹏, 王成才, 刘华华, 王薇, 吕金虎. 变体飞行器控制技术发展现状与展望[J]. 航空学报, 2022, 43(10): 527449-527449.
[9]	叶年辉, 龙腾, 武宇飞, 唐亦帆, 史人赫. 基于Kriging代理模型的约束差分进化算法[J]. 航空学报, 2021, 42(6): 324580-324580.
[10]	张智超, 高太元, 张磊, 拓双芬. 基于径向基神经网络的气动热预测代理模型[J]. 航空学报, 2021, 42(4): 524167-524167.
[11]	胡伟杰, 黄增辉, 刘学军, 吕宏强. 基于自动核构造高斯过程的导弹气动性能预测[J]. 航空学报, 2021, 42(4): 524093-524093.
[12]	范周伟, 余雄庆, 王朝, 钟伯文. 基于深度神经网络的客机总体设计参数敏感性分析[J]. 航空学报, 2021, 42(4): 524353-524353.
[13]	贾贝熙, 吕震宙, 雷婧宇. 涡轮冷却叶片寿命可靠性分析参数化仿真平台[J]. 航空学报, 2021, 42(12): 224747-224747.
[14]	梁帅, 杨林, 杨朝旭, 许斌. 基于Kalman滤波的变体飞行器T-S模糊控制[J]. 航空学报, 2020, 41(S2): 724274-724274.
[15]	李春娜, 张阳康. 一种适用于气动优化的高效自适应全局优化方法[J]. 航空学报, 2020, 41(5): 623352-623352.