[1] MOUSTAPHA H. Small gas turbine technology: Evolution and challenges: AIAA-2003-2559[R]. Reston, VA: AIAA, 2003.
[2] WRONG C B. Turbine engine design: AIAA-1981-0915[R]. Reston, VA: AIAA, 1981.
[3] HAN G, LU X G, ZHAO S F, et al. Parametric studies of pipe diffuser on performance of a highly loaded centrifugal compressor[J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(12): 122604-1-122604-10.
[4] HAN G, LU X G, ZHANG Y F, et al. Study of a highly-Loaded centrifugal compressor with pipe diffuser at design and off-design operating conditions: GT2015-43426[R]. New York: ASME, 2015.
[5] ROBERTS D A, STEED R. A comparison of steady-state centrifugal stage CFD analysis to experimental rig data: Proceedings of the ANSYS user’s conference 10-13[R]. Pittsburgh, PA: ANSYS, 2004.
[6] BOURGEOIS J A, ROBERT J M, ROBERTS D A, et al. Experimental and numerical investigation of an aero-engine centrifugal compressor: GT2009-59808[R]. New York: ASME, 2009.
[7] KUNTE R, JESCHKE P, SMYTHE C. Experimental investigation of a truncated pipe diffuser with a tandem deswirler in a centrifugal compressor stage[J]. Journal of Turbomachinery, 2013, 135(3): 031019-1-031019-10.
[8] VRANA J C. Diffuser for centrifugal compressor: US Patent, 3333762[P]. 1967-08-01.
[9] KENNY D P. A novel low-cost diffuser for high-performance centrifugal compressor[J]. Journal of Engineering for Gas Turbines and Power, 1969, 91(1): 37-47.
[10] KLASSEN H A. Performance of a low-pressure-ratio centrifugal compressor with four diffuser designs: NASA TN-D7237[R]. Washington, D.C.: NASA, 1973.
[11] GROH F G, WOOD G M, KULP R S, et al. Evaluation of a high hub/tip ratio centrifugal compressor[J]. Journal of Basic Engineering, 1970(9): 419-428.
[12] REEVES G. Design and performance of selected pipe-type diffusers: 77-GT-104[R]. New York: ASME, 1977.
[13] YARAS M I. Effects of inlet conditions on the flow in a fishtail curved diffuser with strong curvature[J]. Journal of Fluids Engineering, 1996, 118(2): 772-778.
[14] YARAS M I. Flow measurements in a fishtail diffuser with strong curvature[J]. Journal of Fluids Engineering, 1999, 121(1): 410-417.
[15] YARAS M I, ORSI P. Effects of periodic inflow unsteadiness on the time-averaged velocity field and pressure recovery of a diffusing bend with strong curvature[J]. Journal of Fluids Engineering, 2004, 126(3): 229-237.
[16] BLAIR L W, RUSSO C J. Compact diffusers for centrifugal compressors[J]. Journal of Aircraft, 1981, 19(1): 46-51.
[17] BENNETT I, TOURLIDAKIS A, ELDER R L. Detailed measurements within a selection of pipe diffusers for centrifugal compressors: 88-GT-92[R]. New York: ASME, 1988.
[18] BENNETT I, TOURLIDAKIS A, ELDER R L. The design and analysis of pipe diffusers for centrifugal compressors[J]. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 2000, 214: 87-96.
[19] SHUICHI H, MINEYASU O, HIDEHIKO N, et al. Axial diffuser for a centrifugal compressor: US Patent, 0022586 A1[P]. 2009-01-22.
[20] ZACHAU U, BUESCHER C. Experimental investigation of a centrifugal compressor stage with focus on the flow in the pipe diffuser supported by particle image velocimetry (PIV) measurements: GT2008-51538[R]. New York: ASME, 2008.
[21] ZACHAU U, NIEHUIS R. Experiential investigation of the flow in the pipe diffuser of a centrifugal compressor stage under selected parameter variations: GT2009-59320[R]. New York: ASME, 2009.
[22] KUNTE R, SCHWARZ P, WILKOSZ B, et al. Experimental and numerical investigation of tip clearance and bleed effects in a centrifugal compressor stage with pipe diffuser[J]. Journal of Turbomachinery, 2013, 135(1): 011005-1-011005-12.
[23] WILKOSZ B, SCHMIDT J, GUENTHER C, et al. Numerical and experimental comparison of a tandem and a single vane deswirler used in an aero engine centrifugal compressor[J]. Journal of Turbomachinery, 2014, 136(4): 041005-1-041005-10.
[24] SCHMIDT J, SCHWARZ P, WILKOSZ B, et al. Detailed performance analysis of a centrifugal compressor stage with pipe diffuser and immerged tandem deswirler: GT2015-43484[R]. New York: ASME, 2015.
[25] BOURGEOIS J A, ROBERT J M, SAVORY E, et al. Assessment of turbulence model predictions for an aero-engine centrifugal compressor[J]. Journal of Turbomachinery, 2011, 133(1): 011025-1-011025-15.
[26] ALI S, ELLIOTT K J, SAVORT E, et al. Investigation of the performance of turbulence models with respect to high flow curvature in centrifugal compressors[J]. Journal of Fluids Engineering, 2016, 138(5): 051101-1-051101-10.
[27] SUGIMOTO T, KAWANISHI T, KUMAMARU H, et al. Performance investigation into supersonic diffuser for a high pressure centrifugal compressor: GT2014-25104[R]. New York: ASME, 2014.
[28] GOULD K A, TAN C S, MACRORIE M. Characterization of unsteady impeller-blade loading in a centrifugal compressor with a discrete-passage diffuser: GT2007-28002[R]. New York: ASME, 2007.
[29] DING M Y. CFD analysis of off-design centrifugal compressor operation and performance[D]. Toronto: University of Toronto, 2005.
[30] GRATES D R, JESCHKE P, NIEHUIS R. Numerical investigation of the unsteady flow inside a centrifugal compressor stage with pipe diffuser[J]. Journal of Turbomachinery, 2014, 136(3): 031012-1-031012-14.
[31] WILKOSZ B, ZIMMERMANN M, SCHWARZ P, et al. Numerical investigation of the unsteady interaction within a close-coupled centrifugal compressor used in an aero engine[J]. Journal of Turbomachinery, 2014, 136(4): 041006-1-041006-10.
[32] JAPIKSE D. Centrifugal compressor design and performance[M]. Wilder VT: Concepts ETI, Inc., 1996.
[33] 西安交通大学透平压缩机教研室. 离心压缩机原理[M]. 北京: 机械工业出版社, 1980. TURBINE AND COMPRESSOR LAB OF XI’AN JIAOTONG UNIVERSITY. Fundamentals of centrifugal compressor[M]. Beijing: China Machine Press, 1980 (in Chinese).
[34] 李燕生, 陆桂林. 向心透平与离心压气机[M]. 北京: 机械工业出版社, 1987. LI Y S, LU G L. Radial inflow turbine and centrifugal compressor[M]. Beijing: China Machine Press, 1987 (in Chinese).
[35] VAN DEN BRAEMBUSSCHE R A. Centrifugal compressors analysis & design: Course note 192[R]. Karman Institute for Fluid Dynamics, 2012.
[36] IZUMI M, HIROSE E. Diffuser arrangement for centrifugal compressors: US Patent, 6537028[P]. 2003-05-25.
[37] HAN G, LU X G, ZHANG Y F, et al. Study of geometric parameter influence on fishtail pipe diffuser performance: GT2016-57404[R]. New York: ASME, 2016.
[38] FILIPENCO V G, DENIZ S, JOHNSTON J M, et al. Effects of inlet flow field conditions on the performance of centrifugal compressor diffusers: Part 1-discrete-passage diffuser[J]. Journal of Turbomachinery, 2000, 122(1): 1-10.
[39] 王毅, 赵胜丰, 卢新根, 等. 高负荷离心压气机管式扩压器特点及机理分析[J]. 航空动力学报, 2011, 26(3): 649-655. WANG Y, ZHAO S F, LU X G, et al. Analysis of characteristic and mechanism of pipe diffuser for a highly loaded centrifugal compressor[J]. Journal of Aerospace Power, 2011, 26(3): 649-655 (in Chinese).
[40] 王博, 严明. 离心压气机管式扩压器设计与计算分析[J]. 航空动力学报, 2012,27(6): 1303-1311. WANG B, YAN M. Design and numerical simulation of pipe diffuser in centrifugal compressor[J]. Journal of Aerospace Power, 2012,27(6): 1303-1311 (in Chinese).
[41] 韩戈, 卢新根, 赵胜丰, 等. 喉部长度和扩张角对离心压气机管式扩压器影响研究[J]. 推进技术, 2014, 35(12): 1607-1614. HAN G, LU X G, ZHAO S F, et al. Effects of diffuser throat length and divergence angle on performance of centrifugal compressor with pipe diffuser[J]. Journal of Propulsion Technology, 2014, 35(12): 1607-1614 (in Chinese).
[42] SAROCH M F. Contributions to the study of turbo machinery aerodynamics: Part Ⅰ: Design of a fish-tail diffuser test sections; PartⅡ: Computations of the effects of AVDR on transonic turbine cascades[D]. Carleton: Carleton University, 1996.
[43] 胡骏, 吴铁鹰, 曹人靖. 航空叶片机原理[M]. 北京: 国防工业出版社, 2006. HU J, WU T Y, CAO R J. Fundamentals of aviation turbomachinery[M]. Beijing: National Defense Industry Press, 2006 (in Chinese). |