[1] Oberlin A. Pyrocarbons. Carbon, 2002, 40(1): 7-24. [2] Li H J. Carbon/carbon composites. New Carbon Materials, 2001, 16(2): 79-80. (in Chinese) 李贺军. C/C复合材料. 新型炭材料, 2001, 16(2): 79-80. [3] Zhang J C, Luo R Y, Xiang Q, et al. Compressive fracture behavior of 3D needle-punched carbon/carbon composites. Materials Science and Engineering A, 2011, 528(15): 5002-5006. [4] Hu Y J, Luo R Y, Zhang Y F, et al. Effect of preform density on densification rate and mechanical properties of carbon/carbon composites. Materials Science and Engineering A, 2010, 527(3): 797-801 [5] Reznik B, Guellali M, Gerthsen D, et al. Microstructure and mechanical properties of carbon-carbon composites with multilayered pyrocarbon matrix. Materials Letters, 2002, 52(1-2): 14-19. [6] Xu H J, Huang B Y, Yi M Z, et al. Influence of matrix carbon texture on the temperature field of carbon/carbon composites during braking. Tribology International, 2011, 44(1): 18-24. [7] Sun W C, Li H J, Zhang X L. Influence of high temperature treatment on microstructure and mechanical properties of 2D-C/C composites prepared by liquid-vaporized processing. Acta Aeronautica et Astronautica Sinica, 2002, 23(3): 276-278. (in Chinese) 孙万昌, 李贺军, 张秀莲. 高温处理对液相气化沉积碳/碳复合材料微观组织结构及力学性能的影响. 航空学报, 2002, 23(3): 276-278. [8] Pfrang A, Wan Y Z, Schimmel T. Early stages of the chemical vapor deposition of pyrolytic carbon investigated by atomic force microscopy. Carbon, 2010, 48(3): 921-923. [9] Wu X W, Luo R Y, Zhang J C, et al. Deposition mechanism and microstructure of pyrocarbon prepared by chemical vapor infiltration with kerosene as precursor. Carbon, 2009, 47(6): 1429-1435. [10] Ge Y C, Yi M Z. Influence of carbon matrix on the tribology of C/C composites used as shaft sealing ring. Acta Aeronautica et Astronautica Sinica, 2004, 25(6): 619-624. (in Chinese) 葛毅成, 易茂中. 基体碳结构对轴间密封环用C/C复合材料摩擦磨损特性的影响. 航空学报, 2004, 25(6): 619-624. [11] Xie W X, Qin A. The gray level resolution and intrinsic noise of human vision. Space Medicine & Medical Engineering, 1991, 4(1): 51-55. (in Chinese) 谢维信, 秦桉. 人的视觉对灰度级别的分辨能力及视觉内部噪声的研究. 航空医学与医学工程, 1991, 4(1): 51-55. [12] Zhang W G, Hu Z J, Huttinger K J. Chemical vapor infiltration of carbon fiber felt: optimization of densification and carbon microstructure. Carbon, 2002, 40(14): 2529-2545. [13] Li M L, Qi L H, Li H J, et al. Extinction angle for characterizing optical properties of pyrocarbon. Acta Aeronautica et Astronautica Sinica, 2008, 29(6): 1699-1704. (in Chinese) 李妙玲, 齐乐华, 李贺军, 等. 热解碳光学特性的消光角表征. 航空学报, 2008, 29(6): 1699-1704. [14] Bortchagovsky E G. Reflection polarized light microscopy and its application to pyrolytic carbon deposits. Journal of Applied Physics, 2004, 95(9): 5192-5199. [15] Bortchagovsky E G, Reznikb B, Gerthsenb D, et al. Optical properties of pyrolytic carbon deposits deduced from measurements of the extinction angle by polarized light microscopy. Carbon, 2003, 41(12): 2430-2433. [16] Pfrang A, Schimmel T. Quantitative analysis of pyrolytic carbon films by polarized light microscopy. Surface and Interface Analysis, 2004, 36(2): 184-188. [17] Li M L, Qi L H, Li H J, et al. Measurement of the extinction angle about laminar pyrocarbons by image analysis in reflection polarized light. Materials Science and Engineering A, 2007, 448(1-2): 80-87. [18] Reznik B, Gerthsen D, Bortchagovsky E. An improved method for angular-resolved characterization of the optical anisotropy of pyrolytic carbon. Journal of Microscopy, 2006, 224(3): 322-327. [19] Chuan X Y, Li H J, Lu J H. Why does cross-extinction property of pyrolytic carbon of C/C composites manufactured by CVI never disappear. Journal of Northwestern Polytechnical University, 2005, 23(5): 657-661. (in Chinese) 传秀云, 李贺军, 卢锦花. 化学气相渗透碳/碳复合材料热解碳光性特征——热解碳十字消光机理探讨. 西北工业大学学报, 2005, 23(5): 657-661. [20] Liao J Q, Huang B Y, Huang Z F, et al. Microstructural characterization of pyrocarbon—polarized light microscopic observation of anisotropy of pyrocarbon. Physical Testing and Chemical Analysis: Physical Testing, 2002, 38(11): 501-506. (in Chinese) 廖寄乔,黄伯云,黄志锋,等. 热解碳微观结构的表征——热解碳各向异性的偏光分析. 理化检验:物理分册, 2002, 38(11): 501-506. |