翼身融合布局民机高低速协调设计

doi:10.7527/S1000-6893.2019.23052

翼身融合民机技术专栏

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

翼身融合布局民机高低速协调设计

张明辉¹, 陈真利¹, 顾文婷¹, 李栋¹, 张帅², 袁昌盛¹, 王龙³, 张彬乾¹

1. 西北工业大学航空学院, 西安 710072;
2. 中国商用飞机有限责任公司北京民用飞机技术研究中心, 北京 102211;
3. 航空工业惠阳航空螺旋桨有限责任公司, 保定 071051

收稿日期:2019-03-25 修回日期:2019-04-03 出版日期:2019-09-15 发布日期:2019-05-10
通讯作者: 陈真利 E-mail:zhenlichen@nwpu.edu.cn

Tradeoff design of high and low speed performance for blended-wing-body civil aircraft

ZHANG Minghui¹, CHEN Zhenli¹, GU Wenting¹, LI Dong¹, ZHANG Shuai², YUAN Changsheng¹, WANG Long³, ZHANG Binqian¹

1. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. Beijing Aeronautical Science & Technology Research Institute, Commercial Aircraft Corporation of China, Ltd., Beijing 102211, China;
3. AVIC Huiyang Aviation Propeller Co., Ltd., Baoding 071051, China

Received:2019-03-25 Revised:2019-04-03 Online:2019-09-15 Published:2019-05-10

摘要/Abstract

摘要： 翼身融合（BWB）布局作为一种创新的布局形式，成为未来民用飞机发展的热点。与传统布局相比，BWB布局具有综合优势，是以安全性、经济性、舒适性和环保性为发展目标的下一代大型民用飞机的理想布局。针对BWB布局低速飞行性能不易满足"绿色航空"发展目标的技术现状，分析当前BWB布局高低速综合设计中出现的问题和面临的挑战，提出了改善低速性能的应对策略。通过总体参数对高低速性能的影响规律研究，分析了影响高低速协调设计的各种因素，指出翼载是影响高低速协调设计的核心参数。基于项目组长期研究工作，提出了综合考虑高低速性能的BWB布局设计要求，建立了高速向低速适当妥协，综合平衡高低速矛盾的设计思想，给出了由三点技术措施构成的高低速协调设计原则。根据本文提出的高低速协调设计思想和设计原则，采用多学科综合优化和气动综合设计方法，进行了概念方案的高低速协调设计，获得了高低速协调、综合性能优异的概念设计方案。CFD分析和风洞试验验证结果表明，协调设计后的概念方案，在保持优异巡航性能的同时，显著提高了低速性能，降低了对增升能力的需求，减小了高升力状态力矩平衡措施的设计压力，达到了保证巡航效率和提升低速性能的协调设计目标。本文提出的高低速协调设计思想和设计原则为提升BWB布局低速性能提供了新的思路和方法，可应用于翼身融合类民机布局研究，并可为其他用途翼身融合类飞机设计提供参考。

关键词: 翼身融合布局, 民用飞机, 高低速性能, 协调设计, 设计原则

Abstract: As an innovative configuration, the Blended-Wing-Body (BWB) configuration has become a worldwide research focus in civil aircrafts development. Compared to the conventional configuration, the BWB shows integrative benefits and becomes the most promising candidate for a safe, economical, comfortable, and environmentally friendly large aircraft. This paper emphasizes the fact that the present BWB designs focus on the high speed transonic performance but pay less attention to the low speed characteristics, which leads to the design challenge that the low speed characteristics of BWB configuration can hardly satisfy the severe requirement of "green aviation" for the next generation of aircrafts. To solve this problem, a tradeoff design method for high and low speed performance has been put forward. By analyzing the effects of conceptual design parameters, the wing loading is chosen as the primary parameter to coordinate low and high speed performance. Based on previous studies, a tradeoff design principle consisting of three main technological components has been proposed to balance the conflict between high and low speed performance. A multi-disciplinary design optimization platform is applied to obtain a tradeoff design for both cruise performance and low speed requirements. The CFD and wind tunnel results show significant improvement of low speed performance while maintaining high speed performance. This result is suitable for relieving the pressure of high-lift devices and control surface design, achieving both the cruise efficiency and the required high lift. The methods proposed in this study provides new designs and methods for improving BWB low speed performance, which can be applied to the further study of the BWB civil aircrafts and provide useful information for other applications.

Key words: blended-wing-body configuration, civil aircraft, high and low speed performance, tradeoff design, design philosophy

中图分类号:

V211.3

张明辉, 陈真利, 顾文婷, 李栋, 张帅, 袁昌盛, 王龙, 张彬乾. 翼身融合布局民机高低速协调设计[J]. 航空学报, 2019, 40(9): 623052-623052.

ZHANG Minghui, CHEN Zhenli, GU Wenting, LI Dong, ZHANG Shuai, YUAN Changsheng, WANG Long, ZHANG Binqian. Tradeoff design of high and low speed performance for blended-wing-body civil aircraft[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(9): 623052-623052.

参考文献 38

[1]	GREEN J E. Greener by design:The technology challenge[J]. The Aeronautical Journal, 2002, 106(1056):57-113.
[2]	GRAHAMN W R, HALL C A, MORALES M V. The potential of future aircraft technology for noise and pollutant emissions reduction[J]. Transport Policy, 2014, 34:36-51.
[3]	BOMBURY J B. IATA technology roadmap 2013[M]. Montreal:International Air Transport Association, 2013.
[4]	KALLAS S, GEOGHEGAN-QUINN M. Flightpath 2050-Europe's vision for aviation[R]. Luxembourg:Office for Official Publications of the European Communities, 2011.
[5]	Advisory Council for Aviation Research and innovation in Europe (ACARE). Strategic Research and Innovation Agenda (SRIA):Volume 2[R]. Brussels:ACARE, 2012.
[6]	United States Congress. Open congress, American clean energy and security act of 2009[EB/OL]. (2009-07-20)[2019-03-15].http://www.opencongress.org/bill.111-h2454/text.
[7]	SCHUTTE J, KESTNER B, JIMENEZ H, et al. Updates and modeling enhancements to the assessment of NASA environmentally responsible aviation technologies and vehicle concepts:AIAA-2012-0336[R]. Reston, VA:AIAA, 2012.
[8]	MODY P, SATO S, HALL D, et al. Conceptual design of an N+3 hybrid wing body subsonic transport:AIAA-2010-4812[R]. Reston, VA:AIAA, 2010.
[9]	LIEBECK R H. Design of the blended wing body sub-sonic transport[J]. Journal of Aircraft, 2004, 41(1):10-25.
[10]	朱自强, 王晓璐, 吴宗成,等. 民机的一种新型布局形式——翼身融合体飞机[J].航空学报, 2008, 29(1):49-59. ZHU Z Q, WANG X L, WU Z C, et al. A new type of transport-Blended wing body aircraft[J]. Acta Aero-nautica et Astronautica Sinica, 2008, 29(1):49-59(in Chinese).
[11]	MORRIS A. MOB a European distributed multi-disciplinary design and optimizaiton project:AIAA-2002-5444[R]. Reston, VA:AIAA, 2002.
[12]	张彬乾, 陈真利, 李杰. 亚音速大型民机气动布局发展趋势[C]//大型飞机关键技术高层论坛暨中国航空学会2007年学术年会, 2007:1-6. ZHANG B Q, CHEN Z L, LI J. Development trend of aerodynamic layout for subsonic large-scale civil aircraft[C]//High Level Forum on Key Technologies for Large Aircraft and 2007 Annual Meeting of Chinese Society of Aeronautics and Astronautics, 2007:1-6(in Chinese).
[13]	LI P F, ZHANG B Q, CHEN Y C, et al. Aerodynamic design methodology for blended wing body transport[J]. Chinese Journal of Aeronautics, 2012, 25(4):508-516.
[14]	QIN N, VAVALLE A, MOIGNE A, et al. Aerodynamic considerations of blended wing body aircraft[J]. Progress in Aerospace Sciences, 2004, 40(6):321-343.
[15]	PAUL O, HOWARD S. Review of evolving trends in blended wing body aircraft design[J]. Progress in Aero-space Sciences, 2016, 82(1):1-23.
[16]	HILL G, THOMAS R. Challenges and opportunities for noise reduction through advanced aircraft propulsion airframe integration and configurations[C]//8th CEAS Workshop:Aeroacoustics of New Aircraft and Engine Configurations, 2004:1-13.
[17]	BONET J, SCHELLENGER H, RAWDON B, et al. Environmentally Responsible Aviation(ERA) project-N+2 advanced vehicle concepts study and conceptual design of Subscale Test Vehicle(STV) final report:NASA/CR-2011-216519[R]. Washington, D.C.:NASA, 2011.
[18]	王元元. 波音考虑恢复X-48的试验研究[EB/OL]. (2016-02-03)[2018-11-03].http://www.aeroinfo.com.cn/Item/8431.aspx. WANG Y Y. Boeing ponders reviving X-48 for new tests[EB/OL]. (2016-02-03)[2018-11-03].http://www.aeroinfo.com.cn/Item/8431.aspx (in Chinese).
[19]	王元元. 波音持续深化BWB布局研究[EB/OL]. (2018-03-28)[2018-11-03].http://www.aeroinfo.com.cn/Item/22455.aspx. WANG Y Y. Boeing continues to refine the BWB layout[EB/OL]. (2018-03-28)[2018-11-03].http://www.aeroinfo.com.cn/Item/22455.aspx (in Chinese).
[20]	HOOKER J R, WICK A. Design of the hybrid wing body for fuel efficient air mobility operations:AIAA-2014-1285[R]. Reston, VA:AIAA, 2014.
[21]	ROSKAM J. Airplane design-Part 6:Preliminary calculation of aerodynamic, thrust and power characteristic[M]. Ottawa, KS:Roskam Aviation and Engineering Corporation, 1985:355-360.
[22]	MARTIN WB, JEAN-YVES T, CHRISTOPHE T, et al. Conceptual design framework for blended wing body aircraft:AIAA-2012-5649[R]. Reston, VA:AIAA, 2012.
[23]	MULYANTO T, NURHAKIM M L I. Conceptual design of blended wing body business jet aircraft[J]. Journal of KONES, 2013, 20(4):299-304.
[24]	DOMMELEN J, VOS R. Conceptual design and analy-sis of blended-wing-body aircraft[J]. Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 2014, 228(13):2452-2474.
[25]	GREITZER E M, BONNEFOY P A, BLANCO E, et al. N+3 aircraft concept designs and trade studies. Volume 1:NASA/CR-2010-216794/VOL1[R]. Washington, D.C.:NASA, 2010.
[26]	ROMAN D, ALLEN J, LIEBECK R. Aerodynamic design challenges of the blended-wing-body subsonic transport:AIAA-2000-4335[R]. Reston, VA:AIAA, 2000.
[27]	BOLSUNOVSKY A L, BUZOVERYA N P, GUREVICH B I, et al. Flying wing-Problems and decisions[J]. Aircraft Design, 2001, 4(4):193-219.
[28]	HILEMAN J, REYNOLDS TOM, BLANCO E, et al. SAX-40 development of approach procedures for si-lent aircraft:AIAA-2007-0451[R]. Reston, VA:AIAA, 2007.
[29]	GATLIN G, VICROY D, CARTER M. Experimental investigation of the low-speed aerodynamic characteristics of a 5.8-percent scale hybrid wing body configuration:AIAA-2012-2669[R]. Reston, VA:AIAA, 2012.
[30]	DEERE K A, LUCKRING J M, MCMILLIN S N, et al. CFD predictions for transonic performance of the ERA hybrid wing-body configuration:AIAA-2016-0266[R]. Reston, VA:AIAA, 2016.
[31]	NICKOL C L. Hybrid wing body configuration scaling study:AIAA-2012-0337[R]. Reston, VA:AIAA, 2012.
[32]	李沛峰, 张彬乾, 陈真利,等. 一种采用混合翼身的飞行器气动外形:CN102730181A[P]. 2012-10-17. LI P F, ZHANG B Q, CHEN Z L, et al. Aerobat aero-dynamic configuration adopting mixing wing body:CN102730181A[P]. 2012-10-17(in Chinese).
[33]	ZHANG M H, CHEN Z L, ZHANG B Q. A conceptual design platform for blended wing-body trans-ports[C]//30th Congress of the International Council of the Aeronautical Science. Bonn:ICAS, 2016:1-9.
[34]	GU W T, CHEN Z L, ZHANG B Q. Physically-based multidisciplinary design optimization framework coupling airframe and propulsion[C]//30th Congress of the International Council of the Aeronautical Science. Bonn:ICAS, 2016:1-9.
[35]	DANIEL P R. Aircraft design:A conceptual approach[M]. Reston, VA:AIAA, 1989.
[36]	BRADLEY K R. A sizing methodology for the concep-tual design of blended-wing-body transports:NASA CR-2004-213016[R]. Washington, D.C.:NASA, 2004.
[37]	GREITZER E M, BONNEFOY P A, BLANCO E, et al. N+3 aircraft concept designs and trade studies. Volume 2; Appendices-Doesign methodologies for aerodynamics, structures, weight, and thermodynamic cycles:NASA/CR-2010-216794/VOL2[R]. Washington, D.C.:NASA, 2010.
[38]	GARMENDIA D, CHAKRABORTY I, TRAWICK D. Assessment of electrically actuated redundant control surface layouts for a hybrid wing body concept:AIAA-2014-2428[R]. Reston, VA:AIAA, 2014.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

翼身融合布局民机高低速协调设计

Tradeoff design of high and low speed performance for blended-wing-body civil aircraft

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 38

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨志刚, 张炯, 李博, 曾锐, 毛研勋. 民用飞机智能飞行技术综述[J]. 航空学报, 2021, 42(4): 525198-525198.
[2]	孙霄剑, 罗明强, 张驰, 关若曦, 刘虎. 民用飞机预研论证权威真相源构建技术[J]. 航空学报, 2021, 42(2): 224222-224222.
[3]	张永杰, 吴莹莹, 赵书旺, 司江涛, 袁昌盛. 翼身融合布局民机非圆截面机身结构设计研究综述[J]. 航空学报, 2019, 40(9): 623054-623054.
[4]	顾文婷, 赵振山, 周翰玮, 冯剑, 谭兆光, 李栋. 翼身融合背撑发动机布局的动力短舱设计[J]. 航空学报, 2019, 40(9): 623047-623047.
[5]	周翰玮, 陈勇, 谭兆光, 司江涛, 李杰, 李栋. 翼身融合布局飞机机体-发动机气动干扰效应[J]. 航空学报, 2019, 40(9): 623063-623063.
[6]	李杰, 杨钊, 段卓毅, 张恒, 赵帅. 涡桨飞机发展现状及关键气动问题[J]. 航空学报, 2019, 40(4): 622353-622353.
[7]	陈名乾. 民用飞机商载航程图解析方程的建立及应用[J]. 航空学报, 2019, 40(2): 522407-522407.
[8]	许健, 吴磊, 褚江萍, 何珂. 民用飞机信息重构技术性能分析[J]. 航空学报, 2019, 40(2): 522442-522442.
[9]	何志全, 刘杨, 李泽江. 大型民用飞机缝翼全尺寸静力试验载荷设计[J]. 航空学报, 2019, 40(2): 522197-522197.
[10]	刘毓迪, 孙学德, 张存, 南国鹏. 民用飞机个人通风送风温度对人体舒适性的影响[J]. 航空学报, 2019, 40(2): 522363-522363.
[11]	刘玮, 滕青, 刘冰. 基于地板结构的机身双层双向加载技术[J]. 航空学报, 2018, 39(5): 221712-221712.
[12]	陈俊平, 王立新. 低能量状态对飞行安全的危害及改出方法[J]. 航空学报, 2017, 38(8): 121077-121077.
[13]	郭媛媛, 孙有朝, 李龙彪. 基于蒙特卡罗方法的民用飞机故障风险评估方法[J]. 航空学报, 2017, 38(10): 221126-221126.
[14]	周虹, 陈志雄. 面向民用飞机排故的增强型符号有向图[J]. 航空学报, 2016, 37(12): 3821-3831.
[15]	马超, 吴大卫, 俞金海, 陈迎春. 基于参数化模型的大型民用飞机设计航程研究[J]. 航空学报, 2016, 37(1): 112-121.