[1] |
LAUGHLIN T, CORMAN J, MAVRIS D. A parametric and physics-based approach to structural weight estimation of the hybrid wing body aircraft[C]//51st AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. Reston,VA:AIAA, 2013:16076-16095.
|
[2] |
DICKEY E D, PRINCEN N, BONET J T, et al. Wind tunnel model design and fabrication of a 5.75% scale blended-wing-body twin jet configuration[C]//54th AIAA Aerospace Sciences Meeting. Reston,VA:AIAA, 2016.
|
[3] |
FLANSBURG B D. Structural loads analysis of a hybrid wing body transport[C]//58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2017.
|
[4] |
GERN F H. Conceptual design and structural analysis of an open rotor hybrid wing body aircraft[C]//54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2013.
|
[5] |
LAUGHLIN T W, CORMAN J A, MAVRIS D N. A parametric and physics-based approach to structural weight estimation of the hybrid wing body aircraft[C]//51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston,VA:AIAA, 2013.
|
[6] |
NICKOL C L. Hybrid wing body configuration scaling study[C]//50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston,VA:AIAA, 2012.
|
[7] |
LIEBECK R. Blended wing body design challenges[C]//AIAA International Air and Space Symposium and Exposition:The Next 100 Years. Reston,VA:AIAA, 2003.
|
[8] |
MUKHOPADHYAY V. Hybrid wing-body pressurized fuselage modeling, analysis, and design for weight reduction[C]//53rd AIAA/ASME/ASCE/AHS/ASCStructures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2012.
|
[9] |
MUKHOPADHYAY V. Hybrid-wing-body vehicle composite fuselage analysis and case study[C]//14th AIAA Aviation Technology, Integration, and Operations Conference. Reston,VA:AIAA, 2014.
|
[10] |
MUKHOPADHYAY V, SOBIESZCZANSKI-SOBIESKI J, KOSAKA I, et al. Analysis design and optimization of non-cylindrical fuselage for blended-wing-body (BWB) vehicle[C]//9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. Reston,VA:AIAA, 2002.
|
[11] |
BISHARA M, HORST P, MADHUSOODANAN H,et al. A structural design concept for a multi-shell blended wing body with laminar flow control[J]. Energies, 2018, 11(2):383.
|
[12] |
MUKHOPADHYAY V. Blended-wing-body (BWB) fuselage structural design for weight reduction[C]//46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2005.
|
[13] |
VELICKI A, THRASH P, JEGLEY D. Airframe development for the hybrid wing body aircraft[C]//47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. Reston,VA:AIAA, 2009.
|
[14] |
LIEBECK R H, PAGE M A, RAWDON B K. Blended-wing-body subsonic commercial transport[C]//36th Aerospace Sciences Meeting & Exhibit. Reston,VA:AIAA, 1998.
|
[15] |
KAWAI R T. Benefit potential for a cost efficient dual fuel bwb[C]//51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston,VA:AIAA, 2013.
|
[16] |
REIST T A, ZINGG D W. Optimization of the aerodynamic performance of regional and wide-body-class blended wing-body aircraft[C]//33rd AIAA Applied Aerodynamics Conference. Reston,VA:AIAA, 2015.
|
[17] |
RISCH T, COSENTINO G, REGAN C D, et al. X-48b flight-test progress overview[C]//47th AIAA Aerospace Sciences Meeting and Exhibit. Reston,VA:AIAA, 2009.
|
[18] |
VOS R, GEUSKENS F, HOOGREEF M F M. A new structural design concept for blended wing body cabins[C]//53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2012.
|
[19] |
CHO S H, BIL C, ADAMS R. Design and analysis of bwb military cargo centre body structure[C]//AIAA Centennial of Naval Aviation Forum "100 Years of Achievement and Progress". Reston,VA:AIAA, 2011.
|
[20] |
CHO S H, BIL C, BAYANDOR J. Structural design and analysis of a bwb military cargo transport fuselage[C]//46th AIAA Aerospace Sciences Meeting and Exhibit. Reston,VA:AIAA, 2008.
|
[21] |
BRADLEY K R. A sizing methodology for the conceptual design of blended-wing-body transports:NASA/CR-2004-213016[R]. Washington, D. C.:NASA, 2004.
|
[22] |
LIEBECK R. Design of the blended-wing-body subsonic transport[C]//40th AIAA Aerospace Sciences Meeting & Exhibit. Reston,VA:AIAA, 2002.
|
[23] |
YOVANOF N P, VELICKI A, LI V. Advanced structural stability analysis of a noncircular bwb-shaped vehicle[C]//50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2009.
|
[24] |
LI V, LINTON K. Hybrid wing body (hwb) aircraft design and optimization using stitched composites[C]//16th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston,VA:AIAA, 2015.
|
[25] |
GERN F H. Update on HCDstruct-A tool for hybrid wing body conceptual design and structural optimization[C]//15th AIAA Aviation Technology, Integration, and Operations Conference. Reston,VA:AIAA, 2015.
|
[26] |
WU H T, SHAW P, PRZEKOP A. Analysis of a hybrid wing body center section test article[C]//54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2013.
|
[27] |
GERN F H. Finite element based hwb centerbody structural optimization and weight prediction[C]//53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2012.
|
[28] |
QUINLAN J R, GERN F H. Conceptual design and structural optimization of NASA environmentally responsible aviation (era) hybrid wing body aircraft[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2016.
|
[29] |
JOHNSTON P H, JUAREZ P D. Ultrasonic nondestructive evaluation of pultruded rod stitched efficient unitized structure (PRSEUS) during large-scale load testing and rod push-out testing:NASA/TM-2016-218978[R]. Was-hington, D. C.:NASA, 2016.
|
[30] |
HORNE M R, MADARAS E I. Evaluation of acoustic emission SHM of PRSEUS composite pressure cube tests:NASA/TM-2013-217993[R]. Washington, D.C.:NASA, 2013.
|
[31] |
JEGLEY D C. Experimental behavior of fatigued single stiffener PRSEUS specimens:NASA/TM-2009-215955[R]. Washington, D.C.:NASA, 2009.
|
[32] |
WANG J T, GRENOBLE R W, PICKELL R D. Structural integrity testing method for prseus rod-wrap stringer design[C]//53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and MaterialsConference. Reston,VA:AIAA, 2012.
|
[33] |
JEGLEY D C, VELICKI A. Development of the prseus multi-bay pressure box for a hybrid wing body vehicle[C]//56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.Reston,VA:AIAA, 2015.
|
[34] |
LOVEJOY A E, POPLAWSKI S. Preliminary design and analysis of an in-plane prseus joint[C]//54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2013.
|
[35] |
LOVEJOY A E, LEONE JR F A. T-cap pull-off and bending behavior for stitched structure:NASA/TM-2016-218971[R]. Washington, D.C.:NASA, 2016.
|
[36] |
LOVEJOY A, ROUSE M, LINTON K, et al. Pressure testing of a minimum gauge PRSEUS panel[C]//52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2011.
|
[37] |
JEGLEY D, ROUSE M, PRZEKOP A, et al. Testing of a stitched composite large-scale pressure box[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2016.
|
[38] |
VELICKI A, JEGLEY D. Prseus structural concept development[C]//52nd Aerospace Sciences Meeting. Reston,VA:AIAA, 2014.
|
[39] |
LOVEJOY A E, LEONE F A. Tension and bending testing of an integral t-cap for stitched composite airframe joints[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2016.
|
[40] |
JEGLEY D C. Behavior of frame-stiffened composite panels with damage[C]//54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2013.
|
[41] |
PRZEKOP A, JEGLEY D C, LOVEJOY A E, et al. Testing and analysis of a composite non-cylindrical aircraft fuselage structure, Part I:Ultimate design loads[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2016.
|
[42] |
PRZEKOP A, JEGLEY D C, LOVEJOY A E, et al. Testing and analysis of a composite non-cylindrical aircraft fuselage structure, Part Ⅱ:Severe damage[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2016.
|
[43] |
PRZEKOP A. Repair concepts as design constraints of a stiffened composite prseus panel[C]//53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2012.
|
[44] |
VELICKI A, JEGLEY D. Prseus development for the hybrid wing body aircraft[C]//AIAA Centennial of Naval Aviation Forum "100 Years of Achievement and Progress". Reston,VA:AIAA, 2011.
|
[45] |
PAPAPETROU V S, TAMIJANI A, KIM D. Preliminary wing study of general aviation aircraft with prseus panels[C]//57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston,VA:AIAA, 2016.
|
[46] |
LI V, VELICKI A. Advanced prseus structural concept design and optimization[C]//12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston,VA:AIAA, 2008.
|
[47] |
VELICKI A. Damage arresting composites for shaped vehicles phase 1 final report:NASA/CR-2009-215932[R]. Washington, D. C.:NASA, 2009.
|
[48] |
VELICKI A, THRASH P. Advanced structural concept development using stitched composites[C]//49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2008.
|
[49] |
YOVANOF N P, JEGLEY D C. Compressive behavior of frame-stiffened composite panels[C]//52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2011.
|
[50] |
VELICKI A, YOVANOF N, BARAJA J, et al. Damage arresting composites for shaped vehicles-phase Ⅱ final report:NASA/CR-2011-216880[R].Washington, D.C.:NASA, 2011.
|
[51] |
LINTON K A, VELICKI A, HOFFMAN K, et al. Prseus panel fabrication final report:NASA/CR-2014-218149[R]. Washington, D.C.:NASA, 2014.
|
[52] |
VELICKI A, YOVANOF N P, BARAJA J, et al. PRSEUS acoustic panel fabrication:NASA/CR-2011-217309[R]. Washington, D.C.:NASA, 2011.
|
[53] |
SANZ-DOUGLASS G J, VENKATARAMAN S. Parametric study of influence of stiffener variables onpost-buckling response of frame stiffened composite panels[C]//57th AIAA/ASCE/AHS/ASC Structures,Structural Dynamics and Materials Conference. Reston,VA:AIAA, 2016.
|
[54] |
LAPCZYK I, HURTADO J A. Progressive damage modeling in fiber-reinforced materials[J]. Composites Part A:Applied Science and Manufacturing, 2007, 38(11):2333-2341.
|
[55] |
JEGLEY D C. Improving strength of postbuckled panels through stitching[J]. Composite Structures, 2007, 80(2):298-306.
|