存在横流时双压电风扇激励传热特性

doi:10.7527/S1000-6893.2017.121424

流体力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

存在横流时双压电风扇激励传热特性

李鑫郡, 张靖周, 谭晓茗

南京航空航天大学能源与动力学院, 南京 210016

收稿日期:2017-05-16 修回日期:2017-07-17 出版日期:2018-01-15 发布日期:2018-01-15
通讯作者: 张靖周,E-mail:zhangjz@nuaa.edu.cn E-mail:zhangjz@nuaa.edu.cn
基金资助:
国家自然科学基金（51106073）；中央高校基本科研业务费专项资金（NS2014018）

Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow

LI Xinjun, ZHANG Jingzhou, TAN Xiaoming

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2017-05-16 Revised:2017-07-17 Online:2018-01-15 Published:2018-01-15
Supported by:
National Natural Science Foundation of China (51106073); the Fundamental Research Funds for the Central Universities (NS2014018)

摘要/Abstract

摘要： 基于压电风扇位移的周期性运动规律，采用动网格技术对存在横流时双压电风扇激励的三维非定常流动和传热进行数值模拟，获得了双压电风扇两种布置方式（并列和串列）在同相和反相振动方式下的涡系结构和表面换热特征。研究结果表明，双压电风扇振动相位对于对流换热性能有较大的影响，对于并列布置的双压电风扇，反相振动时在双风扇振动包络区下游的换热能力优于同相振动情形；对于串列布置的双压电风扇，反相振动时在相邻风扇之间的区域对流换热显著低于同相振动情形。

关键词: 压电风扇, 横流, 双风扇, 对流换热, 数值模拟

Abstract: A numerical investigation is performed to explore the 3D unsteady flow features and heat transfer performance induced by dual vertically-oriented piezoelectric fans in the presence of cross flow. The numerical simulations are conducted by using dynamic meshing scheme in combination with the periodic movement law of the displacement of the vibrating fan. The vortical and thermal features with dual piezoelectric fans are obtained for two dual fans arrangements (face-to-face and edge-to-edge) at in-phase and out-of-phase vibrating conditions. The results show that the vibrating phase of dual fans has an obvious influence on convective heat transfer performance. For the dual fans arranged in the face-to-face mode, the convective heat transfer downstream the fan-tip vibration envelope under the out-of-phase situation is higher than that under the in-phase situation. For the dual fans arranged in the edge-to-edge mode, the convective heat transfer in the region between two adjacent fans under the out-of-phase situation is significantly less than that under the in-phase situation.

Key words: piezoelectric fan, cross flow, dual fans, convective heat transfer, numerical simulation

中图分类号:

V231.11
O354

李鑫郡, 张靖周, 谭晓茗. 存在横流时双压电风扇激励传热特性[J]. 航空学报, 2018, 39(1): 121424-121424.

LI Xinjun, ZHANG Jingzhou, TAN Xiaoming. Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(1): 121424-121424.

参考文献

[1] YOO J H, HONG J I, CAO W. Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices[J]. Sensors Actuators A, 2000, 79(1):8-12.[2] CHUNG H C, KUMMARI K L, CROUCHER S J, et al. Development of piezoelectric fans for flapping wing application[J]. Sensors and Actuators A:Physical, 2009, 149(1):136-142.[3] GILSON G M, PICKERING S J, HANN D B, et al. Piezoelectric fan cooling:A novel high reliability electric machine thermal management solution[J]. IEEE Transactions on Industrial Electronics, 2013, 60(11):4841-4851.[4] KIM Y H, WERELEY S T, CHUN C H. Phase-resolved flow field produced by a vibrating cantilever plate between two endplates[J]. Physics in Fluids, 2004, 16(1):145-162.[5] KIM Y H, CHUN C H, WERELEY S. Flow field around a vibrating cantilever:Coherent structure education by continuous wavelet transform and proper orthogonal decomposition[J]. Journal of Fluid Mechanics, 2011, 669:584-606.[6] KIMBER M, SUZUKI K, KITSUNAI N, et al. Pressure and flow rate performance of piezoelectric fans[J]. IEEE Transactions on Components and Packaging Technologies, 2009, 32(4):766-775.[7] 谭蕾, 谭晓茗, 张靖周. 压电风扇激励非定常流动和换热特性数值研究[J]. 航空学报, 2013, 34(6):1277-1284. TAN L, TAN X M, ZHANG J Z. Numerical investigation on unsteady flow and heat transfer characteristics of piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1277-1284(in chinese).[8] TAN L, ZHANG J Z, TAN X M. Numerical investigation of convective heat transfer on a vertical surface due to resonating cantilever beam[J]. International Journal of Thermal Sciences, 2014, 80:93-107.[9] 孔岳, 李敏, 吴蒙蒙. 压电风扇非定常流场速度分布的数值研究[J]. 工程力学, 2016, 33(1):209-216. KONG Y, LI M, WU M M. Numerical investigation on the velocity of unsteady flow field induced by piezoelectric fan[J]. Engineering Mechanics, 2016, 33(1):209-216(in Chinese).[10] ACIKALIN T, WAIT S M, GARIMELLA S V, et al. Experimental investigation of the thermal performance of piezoelectric fans[J]. Heat Transfer Engineering, 2004, 25(1):4-14.[11] ACIKALIN T, GARIMELLA S V, RAMAN A, et al. Characterization and optimization of the thermal performance of miniature piezoelectric fans[J]. International Journal of Heat and Fluid Flow, 2007, 28(4):806-820.[12] ACIKALIN T, GARIMELLA S V. Analysis and prediction of the thermal performance of piezoelectrically actuated fans[J]. Heat Transfer Engineer, 2009, 30(6):487-498.[13] KIMBER M, GARIMELLA S V, RAMAN A. Local heat transfer coefficients induced by piezoelectrically actuated vibrating cantilevers[J]. ASME Journal of Heat Transfer, 2007, 129(9):1168-1176.[14] KIMBER M, GARIMELLA S V. Measurement and prediction of the cooling characteristics of a generalized vibrating piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2009, 52(19-20):4470-4478.[15] LIU S F, HUANG R T, SHEU W J, et al. Heat transfer by a piezoelectric fan on a flat surface subject to the influence of horizontal/vertical arrangement[J]. International Journal of Heat and Mass Transfer, 2009, 52(11-12):2565-2570.[16] LIN C N. Analysis of three-dimensional heat and flow induced by piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2012, 55(11-12):3043-3053.[17] LIN C N. Enhanced heat transfer performance of cylindrical surface by piezoelectric fan under forced convection conditions[J]. International Journal of Heat and Mass Transfer, 2013, 60:296-308.[18] JENG T M, LIU C H. Moving-orientation and position effects of the piezoelectric fan on thermal characteristics of the heat sink partially filled in a channel with axial flow[J]. International Journal of Heat and Mass Transfer, 2015, 85:950-964.[19] 李鑫郡, 张靖周, 谭晓茗. 单个压电风扇传热特性研究[J]. 航空学报, 2017, 38(7):120982. LI X J, ZHANG J Z, TAN X M. Characteristics of heat transfer with a single piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7):120982(in Chinese).[20] JEONG J, HUSSAIN F. On the definition of a vortex[J]. Journal of Fluid Mechanics, 1995, 285:69-94.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

存在横流时双压电风扇激励传热特性

Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郑梅, 冯丽娟, 秦娜, 尹金鸽. 短舱防冰系统三维内外流耦合计算方法[J]. 航空学报, 2023, 44(1): 627425-627425.
[2]	夏侯唐凡, 陈江涛, 邵志栋, 吴晓军, 刘宇. 随机和认知不确定性框架下的CFD模型确认度量综述[J]. 航空学报, 2022, 43(8): 25716-025716.
[3]	朱志斌, 尚庆, 沈清. 高超声速边界层转捩模型横流效应修正与应用[J]. 航空学报, 2022, 43(7): 125685-125685.
[4]	杨建凯, 顾冬冬, 葛庆, 檀晨晨, 文雨. 铝合金激光增材制造支撑布局及精确成形机制[J]. 航空学报, 2022, 43(4): 525331-525331.
[5]	杨体浩, 王一雯, 王雨桐, 史亚云, 周铸. 基于离散伴随的层流翼优化设计方法[J]. 航空学报, 2022, 43(12): 126132-126132.
[6]	姜有旭, 李杰, 杨钊. 某层流机翼验证机风洞试验数据修正方法[J]. 航空学报, 2022, 43(11): 526814-526814.
[7]	沈鹏飞, 刘朋欣, 孙东, 袁先旭. 马赫6柱-裙构型激波/湍流边界层干扰摩阻统计特性[J]. 航空学报, 2022, 43(1): 626005-626005.
[8]	段俊亦, 童福林, 李新亮, 刘洪伟. 压缩-膨胀湍流边界层平均摩阻分解[J]. 航空学报, 2022, 43(1): 625915-625915.
[9]	刘朋欣, 袁先旭, 孙东, 傅亚陆, 李辰. 高温化学非平衡湍流边界层直接数值模拟[J]. 航空学报, 2022, 43(1): 124877-124877.
[10]	刘朋欣, 袁先旭, 梁飞, 李辰, 孙东. 高温化学非平衡湍流边界层脉动量象限分析[J]. 航空学报, 2021, 42(S1): 726338-726338.
[11]	鲍俊, 王瑜, 牛潜, 朱锡冬, 程建杰. 喷雾液滴撞击液膜影响参数及流动机理分析[J]. 航空学报, 2021, 42(S1): 726360-726360.
[12]	陈崇沛, 梁剑寒, 关清帝, 高天运. 守恒型可压缩一维湍流方法及其在超声速标量混合层中的应用[J]. 航空学报, 2021, 42(S1): 726364-726364.
[13]	李青, 涂国华, 余钊圣, 林昭武, 李婷婷, 袁先旭. 惯性颗粒在非均匀加速流中的输运问题[J]. 航空学报, 2021, 42(S1): 726390-726390.
[14]	向星皓, 张毅锋, 袁先旭, 涂国华, 万兵兵, 陈坚强. C-γ-Re_θ高超声速三维边界层转捩预测模型[J]. 航空学报, 2021, 42(9): 625711-625711.
[15]	李成成, 李芳, 杨斌, 王莹. 等离子体激励抑制喷管分离流动数值模拟[J]. 航空学报, 2021, 42(7): 124547-124547.