[1] Tay T E, Liu G, Yudhanto A, et al. A micro-macro approach to modeling progressive damage in composite structures[J]. International Journal of Damage Mechanics, 2008, 17(1): 5-28.[2] Tsai S W, Wu E M. A general theory of strength for anisotropic materials[J]. Journal of Composite Materials, 1971, 5(1): 58-80.[3] Hashin Z, Rotem A. A fatigue failure criterion for fiber reinforced materials[J]. Journal of Composite Materials, 1973, 7(4): 448-464.[4] Hashin Z. Failure criteria for unidirectional fibre composites[J]. Journal of Applied Mechanics, 1980, 47(2): 329-334.[5] Puck A, Schurmann H. Failure analysis of FRP laminates by means of physically based phenomenological models[J]. Composites Science and Technology, 1998, 58(7): 1045-1067.[6] Huang Z M. A bridging model prediction of the ultimate strength of composite laminates subjected to biaxial loads[J]. Composites Science and Technology, 2004, 64(3): 395-448.[7] Wang C S, Chen P H, Sui X D, et al. Multi-spar composite box design and its post-buckling analysis[J]. Acta Materiae Compositae Sinica, 2013, 30(5): 174-179. (in Chinese) 王春寿, 陈普会, 隋晓东, 等. 复合材料多墙盒段的设计与后屈曲性能[J]. 复合材料学报, 2013, 30(5): 174-179.[8] Yao Z H, Li Y Z, Liu X D, et al. Effectively calculating residual compressive strength of composite laminate after impact (CAI)[J]. Journal of Northwestern Polytechnical University, 2012, 30(4): 518-523. (in Chinese) 姚振华, 李亚智, 刘向东, 等. 复合材料层合板低速冲击后剩余压缩强度研究[J]. 西北工业大学学报, 2012, 30(4): 518-523.[9] Zhong X D, Chen P H, Liu L Y, et al. Panel splices design and analysis of double bubble intersection in composite pressure cabin[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(10): 2357-2363. (in Chinese) 钟小丹, 陈普会, 刘利阳, 等. 复合材料增压舱双圆截面交点连接设计分析[J]. 航空学报,2013, 34(10): 2357-2363.[10] Yao L J, Zhao M Y, Wan X P. Parameter analysis of composite laminates with patched reinforcement based on CDM-CZM[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(4): 666-671. (in Chinese) 姚辽军, 赵美英, 万小朋. 基于CDM-CZM的复合材料补片补强参数分析[J]. 航空学报, 2012, 33(4): 666-671.[11] Davila C G, Camanho P P, Rose C A. Failure criteria for FRP laminates[J]. Journal of Composite Materials, 2005, 39(4): 323-345.[12] Pinho S T, Darvizeh R, Robinson P, et al. Material and structural response of polymer-matrix fibre-reinforced composites[J]. Journal of Composite Materials, 2012, 46(19-20): 2313-2341.[13] Parvizi A, Garrett K, Bailey J. Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates[J]. Journal of Material Science, 1978, 13(1): 195-201.[14] Dvorak G J, Laws N. Analysis of progressive matrix cracking in composite laminates II. First ply failure[J]. Journal of Composite Materials, 1987, 21(4): 309-329.[15] Flaggs D L, Kural M H. Experimental determination of the in situ transverse lamina strength in graphite/epoxy laminates[J]. Journal of Composite Materials, 1982, 16(2): 103-116.[16] Sun C T, Tao J. Prediction of failure envelopes and stress/strain behaviour of composite laminates[J]. Composites Science and Technology, 1998, 58(7): 1125-1136.[17] Rotem A. Prediction of laminate failure with the Rotem failure criterion[J]. Composites Science and Technology, 1998, 58(7): 1083-1094.[18] Chang K Y, Llu S, Chang F K. Damage tolerance of laminated composites containing an open hole and subjected to tensile loadings[J]. Journal of Composite Materials, 1991, 25(3): 274-301.[19] Camanho P P, Davila C G, Pinho S T, et al. Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear[J]. Composites: Part A, 2006, 37(2): 165-176.[20] Crossman F W, Warren W J, Wang A S D, et al. Initiation and growth of transverse cracks and edge delamination in composite laminates Part 2. Experimental correlation[J]. Journal of Composite Materials, 1980, 14(1): 88-108.[21] Argon A S. Fracture of composites[J]. Treatise on Materials Science and Technology, 1972(1): 79-114.[22] Daniel I M, Luo J J, Schubel P M, et al. Interfiber/interlaminar failure of composites under multi-axial states of stress[J]. Composites Science and Technology, 2009, 69(6): 764-771.[23] Swanson S R, Qian Y. Multiaxial characterization of T800/3900-2 carbon/epoxy composites[J]. Composites Science and Technology, 1992, 43(2): 197-203.[24] Koerber H, Xavier J, Camanho P P. High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation[J]. Mechanics of Materials, 2010, 42(11): 1004-1019.[25] Shuart M J. Failure of compression-loaded multidirectional composite laminates[J]. AIAA Journal, 1989, 27(9): 1274-1279.[26] Soden P D, Hinton M J, Kaddour A S. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates[J]. Composites Science and Technology, 1998, 58(7): 1011-1022. |