航空学报 > 2014, Vol. 35 Issue (3): 624-633   doi: 10.7527/S1000-6893.2013.0449

高超声速飞行器主动冷却系统优化设计

汪新智1, 马军军2, 彭稳根1, 何玉荣1   

  1. 1. 哈尔滨工业大学 能源科学与工程学院, 黑龙江 哈尔滨 150001;
    2. 陕西鼓风机(集团)有限公司, 陕西 西安 710082
  • 收稿日期:2013-03-12 修回日期:2013-11-05 出版日期:2014-03-25 发布日期:2013-11-26
  • 通讯作者: 何玉荣,Tel.:0451-86413233 E-mail:rong@hit.edu.cn E-mail:rong@hit.edu.cn
  • 作者简介:汪新智 男,博士研究生。主要研究方向:高超声速飞行器相关流动及传热、功能流体过程强化机理及应用。Tel:0451-86413233 E-mail:wxzhit@qq.com;马军军 男,硕士研究生。主要研究方向:高超声速飞行器相关流动及传热问题。E-mail:majunjun2010@foxmail.com;彭稳根 男,博士研究生。主要研究方向:气固两相流动及其传热传质问题研究。Tel:0451-86413233 E-mail:pengwengen@gmail.com;何玉荣 女,博士,教授,博士生导师。主要研究方向:多相流流动及传热、功能流体过程强化机理及应用、高超声速飞行器相关流动及传热问题、新能源的开发和利用。Tel:0451-86413233 E-mail:rong@hit.edu.cn
  • 基金资助:

    国家自然科学基金创新研究群体项目(51121004)

Optimal Design for Active Cooling System of Hypersonic Vehicle

WANG Xinzhi1, MA Junjun2, PENG Wen'gen1, HE Yurong1   

  1. 1. School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
    2. Shanxi Blower (Group) Company Limited, Xi'an 710082, China
  • Received:2013-03-12 Revised:2013-11-05 Online:2014-03-25 Published:2013-11-26
  • Supported by:

    The Foundation for Innovative Research Groups of the National Natural Science Foundation of China (51121004)

摘要:

以碳氢燃料为冷却剂的主动冷却系统是进行高超声速飞行器热防护最有效的方法之一。在满足工作要求的情况下,应尽量减小主动冷却系统的质量,实现飞行器的轻质化目标。利用MATLAB@2007软件对高超声速飞行器燃烧室的主动冷却系统进行了优化设计,计算了冷却通道在满足各项热负荷条件下,系统的最小质量以及此时所对应的冷却通道各项尺寸。选择了Inconel X-750、Inconel 625和Hastelloy X 这3种不同的镍基合金分别当做冷却通道固壁材料,并且在主动冷却系统的近燃烧侧引入热障涂层,以分析不同材料和有无热障涂层对系统轻质化的影响,为高超声速飞行器主动冷却系统的材料选择和优化设计提供了理论依据。

关键词: 高超声速飞行器, 主动冷却, 热防护, 碳氢燃料, 优化设计

Abstract:

Active cooling with hydrocarbon-fuel is one of the most effective ways for hypersonic vehicle thermal protection. In order to enture the lightweight of a flight vehicle it is very necessary to minimize the weight of the active cooling system under working conditions. This paper provides an optimization method for the purpose by developing a code based on MATLAB@2007. The code is applied to calculate the minimum weight and the structure dimensions of the active cooling system under various loading conditions. Three Ni-based alloys including Inconel X-750, Inconel 625 and Hastelloy X are selected as the solid materials of the active cooling system, respectively. A thermal barrier coating is applied on the actively cooled panel side near the combustion chamber to discuss the thermal barrier coating's effect on minimizing the weight. This work is helpful in testing the optimal result of different materials and provides a good theoretical foundation for the material selection and optimal design of the active cooling system.

Key words: hypersonic vehicle, active cooling, thermal protection, hydrocarbon-fuel, optimal design

中图分类号: