航空学报 > 2017, Vol. 38 Issue (4): 120263-120263   doi: 10.7527/S1000-6893.2016.0263

沟槽面湍流减阻数值评估方法

周健1, 欧平1, 刘沛清2, 郭昊2   

  1. 1. 中国航天空气动力技术研究院, 北京 100074;
    2. 北京航空航天大学 航空科学与工程学院, 北京 100083
  • 收稿日期:2016-03-25 修回日期:2016-09-26 出版日期:2017-04-15 发布日期:2016-09-28
  • 通讯作者: 欧平 E-mail:caaaop@163.com

Numerical evaluation method of turbulence drag reduction with riblets

ZHOU Jian1, OU Ping1, LIU Peiqing2, GUO Hao2   

  1. 1. China Academy of Aerospace Aerodynamics, Beijing 100074, China;
    2. School of Aeronautic Science and Engineering, Beihang University, Beijing 100083, China
  • Received:2016-03-25 Revised:2016-09-26 Online:2017-04-15 Published:2016-09-28

摘要:

为解决雷诺平均Navier-Stokes(RANS)方法模拟沟槽面减阻的实际应用问题,受Wilcox对粗糙度模化方法的启发,通过深入分析k-ω剪切应力输运(SST)湍流模型近壁区ω值的作用效果,发现在黏性底层内增加壁面ω值可使对应近壁区的湍动能、湍流黏度、雷诺应力均减小,这种对近壁区流动特性的作用效果与真实沟槽面一致。以经典的对称V型沟槽面(高度=间距)减阻实验数据为基础,通过引入减阻效果影响因子——压力梯度与偏航角,建立复杂流动条件下沟槽面几何尺寸到壁面ω值的模化函数方程,将数值模拟结果与实验结果对比,验证了模化沟槽面可以达到与真实沟槽面相同的减阻效果,并依此给出沟槽面减阻在工程实践中的应用方法,以C919翼身组合体巡航构型为例,完成其沟槽面减阻的总体设计与评估。

关键词: 沟槽面, 湍流减阻, k-ω剪切应力输运, 模化函数, 数值模拟

Abstract:

In order to apply numerical simulation method based on Reynolds-averaged Navier-Stokes (RANS) equations to drag reduction with riblets, inspired by the roughness model-Wilcox and after a deeper study on the effect of the value of ω near wall in k-ω shear stress transport (SST) turbulence model, it turns out that an increasing of wall ω in viscous sublayer leads to a decreasing of turbulent kinetic energy, turbulent viscosity and Reynolds shear stress, which shows the same change as realistic riblets. Based on the classical experimental data of riblets with symmetric V grooves (height=width), by introducing the effect factors pressure gradients and yaw angle, a modeling function between riblets geometry size and the value of wall ω is established in complex flow conditions. Comparing with the experimental data confirms that the modeling riblets can predict the drag reduction as realistic riblets. Besides, a detailed application method of modeling riblets is proposed. At last, an overall design and evaluation of the drag reduction by riblets is given in the case of the C919 wing-body combination.

Key words: riblet, turbulence drag reduction, k-ω shear stress transport, modeling function, numerical simulation

中图分类号: