基于逆系统方法的多输入多输出非高斯驱动信号生成

doi:10.7527/S1000-6893.2016.0039

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于逆系统方法的多输入多输出非高斯驱动信号生成

陈怀海¹, 王鹏宇¹, 孙建勇²

1. 南京航空航天大学机械结构力学及控制国家重点实验室, 南京 210016;
2. 中国航空综合技术研究所, 北京 100028

收稿日期:2015-07-10 修回日期:2016-02-13 出版日期:2016-05-15 发布日期:2016-02-24
通讯作者: 陈怀海,Tel.:025-84893028 E-mail:chhnuaa@nuaa.edu.cn E-mail:chhnuaa@nuaa.edu.cn
作者简介:陈怀海,男,博士,教授,博士生导师。主要研究方向:振动测试分析与控制、有限元模型与修正和结构动力学设计。Tel:025-84893028 E-mail:chhnuaa@nuaa.edu.cn;王鹏宇,男,硕士研究生。主要研究方向:振动测试分析与控制。 E-mail:whdwpy666@163.com;孙建勇,男,硕士,研究员。主要研究方向:装备环境工程与环境试验。 E-mail:sun_jy_1972@163.com
基金资助:
航空科学基金(20140241002);江苏高校优势学科建设工程资助项目

Generation of multi-input multi-output non-Gaussian driving signal based on inverse system method

CHEN Huaihai¹, WANG Pengyu¹, SUN Jianyong²

1. State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. China Aero Polytechnology Establishment, Beijing 100028, China

Received:2015-07-10 Revised:2016-02-13 Online:2016-05-15 Published:2016-02-24
Supported by:
Aeronautical Science Foundation of China (20140241002);A Project Funded by the Priority Academic Program Development of Higher Education Institutions of Jiangsu Province

摘要/Abstract

摘要：

多输入多输出(MIMO)振动环境试验是振动试验的新方法,该方法比传统的单输入单输出(SISO)方法更真实地模拟了结构在实际工作下的振动环境。传统随机振动试验的频域方法所模拟的是平稳高斯信号,但是实际振动环境往往是超高斯的,且超高斯激励和高斯激励对结构的损害差异很大,因此对MIMO超高斯振动环境试验的研究十分重要。驱动信号的产生是振动环境试验的关键。提出一种基于逆系统的MIMO超高斯驱动信号生成方法。首先,根据给定的响应参考功率谱密度(PSD)和参考峭度值采用相位调节法生成参考响应超高斯伪随机信号;其次,利用逆系统方法生成超高斯伪随机驱动信号;最后,对伪随机驱动信号进行时域随机化处理得到超高斯真随机驱动信号。对一根两输入两输出的悬臂梁模型进行了仿真验证,结果表明,采用本文方法所得到的驱动信号加载在梁上后,其输出响应谱与给定参考谱之间的误差完全满足工程中常用的±3 dB的要求,而且峭度也与给定的参考值十分接近,证实了所提方法的有效性。

关键词: 振动环境试验, 多输入多输出, 功率谱密度, 超高斯, 峭度, 逆系统

Abstract:

The multi-input multi-output (MIMO) vibration environment test is a new method in the vibration testing area, which can replicate the vibration environment endured by a structure under the practical situation more accurately than the traditional single-input single-output (SISO) manner. The traditional random vibration test with frequency domain method aims to generate a stationary and Gaussian vibration environment. But the practical vibration environments are always non-Gaussian, which can cause different damages to the structures compared with Gaussian excitations. Thus, it is significant to study the MIMO non-Gaussian test method. The generation of the driving signals is the key in the vibration environment test. In this paper, a method for generating MIMO non-Gaussian driving signals based on inverse system and phase manipulation is proposed. First, phase manipulation is used to generate the pseudo random non-Gaussian responses according to the given reference power spectrum densities (PSD) and kurtoses. Then inverse system method is used to generate the pseudo driving signals. Finally, the real random non-Gaussian driving signals are obtained by time domain randomization. A two-input two-output cantilever beam model is selected as an example. The simulation results indicate that the error between the output response spectra and the reference ones meets the ±3 dB requirements in engineering practice and the values of kurtoses of the outputs are very close to the reference ones. Thus, the proposed method is valid.

Key words: vibration environment test, MIMO, power spectrum density, non-Gaussian, kurtosis, inverse system

中图分类号:

V216.5
O324

陈怀海, 王鹏宇, 孙建勇. 基于逆系统方法的多输入多输出非高斯驱动信号生成[J]. 航空学报, 2016, 37(5): 1544-1551.

CHEN Huaihai, WANG Pengyu, SUN Jianyong. Generation of multi-input multi-output non-Gaussian driving signal based on inverse system method[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(5): 1544-1551.

参考文献

[1] SMALLWOOD D O. Multiple-input multiple-output (MIMO) linear systems extreme inputs/outputs[J]. Shock and Vibration, 2007, 14(2):107-131.
[2] 姜双燕, 陈怀海, 贺旭东, 等. 基于回路整型设计的多轴振动控制[J]. 航空学报, 2010, 31(10):1940-1945. JIANG S Y, CHEN H H, HE X D, et al. Multi-axis vibration control research via loop-shaping design[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(10):1940-1945(in Chinese).
[3] Department of Defense. Environmental engineering considerations and laboratory tests:MIL-STD-810G[S]. Washington, D.C.:Department of Defense, 2012.
[4] KUMAR K S, STATHOPOULOS T. Synthesis of non-Gaussian wind pressure time series on low building roofs[J]. Engineering Structures, 1999, 21(12):1086-1100.
[5] LI J H, LI C X. Simulation of non-Gaussian stochastic process with target power spectral density and lower-order moments[J]. Journal of Engineering Mechanics, 2011, 138(5):391-404.
[6] GARCIA R M, ROUILLARD V. On the statistical distribution of road vehicle vibrations[J]. Packaging Technology and Science, 2011, 24(8):451-467.
[7] ROUILLARD V, SEK M. Creating transport vibration simulation profiles from vehicle and road characteristics[J]. Packaging Technology and Science, 2013, 26(2):82-95.
[8] 蒋培, 张春华, 陈循, 等. 超高斯随机振动环境的疲劳强化机理[J]. 国防科技大学学报, 2004(3):99-102. JIANG P, ZHANG C H, CHEN X, et al. Fatigue strengthening mechanism of the super-Gaussian random vibration environment[J]. Journal of National University of Defense Technology, 2004(3):99-102(in Chinese).
[9] SMALLWOOD D O. Generating non-Gaussian vibration for testing purposes[J]. Sound and Vibration, 2005, 39(10):18-23.
[10] WINTERSTEIN S. Nonlinear vibration models for extremes and fatigue[J]. Journal of Engineering Mechanics, 1988, 114(10):1772-1790.
[11] STEINWOLF A. Random vibration testing with kurtosis control by IFFT phase manipulation[J]. Mechanical Systems and Signal Processing, 2012, 28(2):561-573.
[12] 蒋瑜, 陶俊勇, 王得志, 等. 一种新的非高斯随机振动数值模拟方法[J]. 振动与冲击, 2012, 31(19):169-173. JIANG Y, TAO J Y, WANG D Z, et al. A novel approach for numerical simulation of a non-Gaussian random vibration[J]. Journal of Vibration and Shock, 2012, 31(19):169-173(in Chinese).
[13] 李锦华, 李春祥, 申建红. 非高斯脉动风压的模拟研究[J]. 振动与冲击, 2009, 28(9):5-9. LI J H, LI C X, SHEN J H. Simulation of non-Gaussian fluctuating wind pressure[J]. Journal of Vibration and Shock, 2009, 28(9):5-9(in Chinese).
[14] 崔旭利, 陈怀海, 贺旭东,等. 多输入多输出随机振动试验变参数PID控制[J]. 航空学报, 2010, 31(9):1776-1780. CUI X L, CHEN H H, HE X D, et al. PID control with variable arguments for MIMO random vibration test[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(9):1776-1780(in Chinese).
[15] CUI X L, CHEN H H, HE X D, et al. Matrix power control algorithm for multi-input multi-output random vibration test[J]. Chinese Journal of Aeronautics, 2011, 24(6):741-748.
[16] STEINWOLF A. Closed-loop shaker simulation of non-Gaussian random vibrations[J]. Test Engineering and Management, 2006, 68(3):1-10.
[17] 魏星原, 宋斌, 郑效忠. 载荷识别的逆系统方法[J]. 振动、测试与诊断, 1995, 15(3):35-43. WEI X Y, SONG B, ZHEN X Z. A method of inverse system to identify force[J]. Journal of Vibration, Measurement & Diagnosis, 1995, 15(3):35-43(in Chinese).
[18] MA C K, CHANG J M, LIN D C. Input forces estimation of beam structures by an inverse method[J]. Journal of Sound and Vibration, 2003, 259(2):387-407.
[19] KAMMER D C. Input force reconstruction using a time domain technique[J]. Journal of Vibration and Acoustics, 1998, 120(4):868-874.
[20] 贺旭东, 陈怀海, 申凡, 等. 双振动台随机振动综合控制研究[J]. 振动工程学报, 2006, 19(2):145-149 HE X D, CHEN H H, SHEN F, et al. Study of dual-shaker random vibration test control[J]. Journal of Vibration Engineering, 2006, 19(2):145-149(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于逆系统方法的多输入多输出非高斯驱动信号生成

Generation of multi-input multi-output non-Gaussian driving signal based on inverse system method

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张忠强, 张新, 王家序, 刘治汶. 基于重加权谱峭度方法的航空发动机故障诊断[J]. 航空学报, 2022, 43(9): 625445-625445.
[2]	瞿绍奇, 孙英超, 邬亨贵, 李延平, 张伟. 飞行器径向连接螺栓振动断裂分析[J]. 航空学报, 2021, 42(5): 524431-524431.
[3]	郑威, 陈怀海. MIMO随机振动试验控制的逆多步预测模型法[J]. 航空学报, 2020, 41(2): 223000-223000.
[4]	张洁, 庞丽萍, 完颜笑如, 陈浩, 王鑫, 梁晋. 基于脑电功率谱密度的作业人员脑力负荷评估方法[J]. 航空学报, 2020, 41(10): 123618-123618.
[5]	李振亚, 竺小松, 尹成友, 吴伟, 王勇. 基于角度分集的机载超宽带MIMO天线设计[J]. 航空学报, 2019, 40(5): 322552-322552.
[6]	刘祥, 孙秦. 多回路气动伺服弹性系统稳定裕度的变结构μ分析方法[J]. 航空学报, 2017, 38(4): 120350-120350.
[7]	孟韩, 黄海, 黄舟. 多自由度非高斯随机振动控制[J]. 航空学报, 2017, 38(2): 220458-220465.
[8]	彭珍妮, 贲德, 张弓, 徐笛. 基于稀疏随机阵列配置的CS-MIMO雷达感知矩阵构造[J]. 航空学报, 2016, 37(3): 1015-1024.
[9]	芮国胜, 张海波, 田文飚, 邓兵, 李廷军. 基于MMSE的近似最优Lattice Reduction辅助线性并行检测算法[J]. 航空学报, 2013, 34(8): 1898-1905.
[10]	胡彤, 张弓, 李建峰, 张小飞, 贲德. 非圆实信号MIMO雷达中基于实值ESPRIT的角度估计[J]. 航空学报, 2013, 34(8): 1953-1959.
[11]	李继超, 童志庭, 聂超群, 林峰. 基于互相关分析的前失速先兆检测分析[J]. 航空学报, 2013, 34(1): 28-36.
[12]	胡永江, 李小民. 基于非全向天线的无人机MIMO信道模型研究[J]. 航空学报, 2011, 32(6): 1092-1101.
[13]	李金涛, 房建成. 高精度光纤IMU的磁屏蔽方法及实验研究[J]. 航空学报, 2011, 32(11): 2106-2116.
[14]	吕奇峰;张卫红;张桥;朱继宏. 随机振动响应下的组件结构布局优化设计[J]. 航空学报, 2010, 31(9): 1769-1775.
[15]	翟伟伟;张弓;刘文波. 基于杂波子空间估计的MIMO雷达降维STAP研究[J]. 航空学报, 2010, 31(9): 1824-1831.